ヒドリドカリウム

危険有害性情報のコード(GHS)

• 絵表示(GHS)

  

• 注意喚起語

  Danger

• 危険有害性情報

  H260：水に触れると自然発火するおそれのある可燃性 /引火性ガスを発生

  H314：重篤な皮膚の薬傷?眼の損傷

• 注意書き

  P223：激しい反応と火災の発生の危険があるため、水と接 触させないこと。

  P231+P232：湿気を遮断し、不活性ガス下で取り扱うこと。

  P280：保護手袋/保護衣/保護眼鏡/保護面を着用するこ と。

  P303+P361+P353：皮膚（または髪）に付着した場合：直ちに汚染された衣 類をすべて脱ぐこと/取り除くこと。皮膚を流水/シャワー で洗うこと。

  P305+P351+P338：眼に入った場合：水で数分間注意深く洗うこと。次にコ ンタクトレンズを着用していて容易に外せる場合は外す こと。その後も洗浄を続けること。

ヒドリドカリウム 価格

ヒドリドカリウム 化学特性,用途語,生産方法

• 化学的特性

  Potassium hydride is available in laboratory quantities only as a 20 – 35 % dispersion in oil. Potassium hydride is a considerably stronger base than lithium hydride or sodium hydride. It is able to remove protons from tertiary alcohols and ketones, a reaction that either does not occur or is very slow when sodium hydride is used. Potassium hydride also reacts with weak Lewis acids, converting sterically hindered boron trialkyls to the corresponding sterically hindered complex borohydrides:
  

• 使用

  Potassium Hydride is used in preparation of Hydroxy-Xanthone derivatives via Isoprenylation followed by Claisen rearrangement starting from Fluoroxanthone derivatives.

• 定義

  potassium hydride: A white orgreyish white crystalline solid, KH;r.d. 1.43–1.47. It is prepared by passinghydrogen over heated potassiumand marketed as a light grey powderdispersed in oil. The solid decomposeson heating and in contact withmoisture and is an excellent reducingagent. Potassium hydride is a firehazard because it produces hydrogenon reaction with water.

• 反応性

  Potassium hydride acts as a base and as hydride donor. It is used for deprotonation, cyclization-condensation, elimination, and rearrangement reactions, and also as a reducing agent. Potassium hydride undergoes reaction quickly and quantitatively with acids, and of particular note is its capability to rapidly deprotonate tertiary alcohols where sodium hydride or potassium metal do so slowly or not at all. The reactions of metal hydrides take place at the crystal surface. The crystal lattice energies decrease from lithium to cesium hydride, and potassium hydride appears to have the optimal lattice energy and hydride radius for surface reactions. The presence of 18-crown-6 enhances the reactivity of potassium hydride, The crown ether can operate as a phase-transfer agent or as a simple “pickling” agent of the potassium hydride surface, dissolving the formed inorganic salts. Potassium hydride is usually superior to lithium and sodium hydride in the reactions. Unusually active potassium hydride can be prepared easily from hydrogen and superbasic reagents (t-BuOK-TMEDA) in hexane. “Superactive potassium hydride” is very active in deprotonation as well as in reduction. The reactivity of commercially available potassium hydride, which is prepared by the reaction of hydrogen gas with elemental potassium, depends upon the impurities in different lots (mainly potassium or its reaction products), thus leading to side reactions and variable yields. The superactive metal hydride contains no alkali metal.

• 一般的な説明

  This product has been enhanced for energy efficiency.

• 危険性

  Dangerous fire and explosion risk, evolves toxic and flammable gases on heating and on expo- sure to moisture.

• 健康ハザード

  Potassium hydride react with the moisture on skin and other tissues to form highly corrosive sodium and potassium hydroxide. Contact of these hydrides with the skin, eyes, or mucous membranes causes severe burns; thermal burns may also occur due to ignition of the liberated hydrogen gas.

• 火災危険

  Potassium hydride is flammable solid that ignite on contact with moist air. Potassium hydride presents a more serious fire hazard than sodium hydride. The mineral oil dispersions do not ignite spontaneously on exposure to the atmosphere. Sodium hydride and potassium hydride fires must be extinguished with a class D dry chemical extinguisher or by the use of sand, ground limestone, dry clay or graphite, or "Met-L-X " type solids. Water or CO 2 extinguishers must never be used on sodium and potassium hydride fires.

• 燃焼性と爆発性

  Potassium hydride and sodium hydride are flammable solids that ignite on contact with moist air. Potassium hydride presents a more serious fire hazard than sodium hydride. The mineral oil dispersions do not ignite spontaneously on exposure to the atmosphere. Sodium hydride and potassium hydride fires must be extinguished with a class D dry chemical extinguisher or by the use of sand, ground limestone, dry clay or graphite, or "Met-L-X" type solids. Water or CO2 extinguishers must never be used on sodium and potassium hydride fires.

• 安全性プロファイル

  Dangerous fire hazard by chemical reaction. Ignites spontaneously in air. Moderate explosion hazard when exposed to heat or by chemical reaction. Wdl react with water, steam, or acids to produce H2 which then igmtes. Can react vigorously with oxidizing materials. To fight fire, use CO2, dry chemical. Potentially explosive reactions with 0-2,4- dnitrophenylhydroxylamine, fluoroalkenes. Ignites on contact with air, oxygen + moisture, fluorine. Incompatible with Cl2, acetic acid, acrolein, acrylonitrile, (CaC + Cl2), ClO2, (H202 + Cl2), (CHFL + CH,OH), 1,2-dchloroethylene, maleic anhydride, (n-methyl-n-nitrosourea + CH2Cl2), nitroethane, NCb, nitromethane, nitroparaffins, o-nitrophenol, nitropropane, n-nitrosomethylurea, (nitrosomethylurea + CH2Cl2), H20, trichloroethylene, tetrahydrofuran, tetrachlorethane. When heated to decomposition it emits highly toxic fumes of K2O. See also POTASSIUM and HYDRIDES.

• 貯蔵

  Safety glasses, impermeable gloves, and a fire-retardant laboratory coat should be worn at all times when working with these substances. These hydrides should be used only in areas free of ignition sources and should be stored preferably as mineral oil dispersions under an inert gas such as argon.

• 不和合性

  Potassium hydride and sodium hydride react violently with water, liberating hydrogen, which can ignite. Oil dispersions of these hydrides are much safer to handle because the mineral oil serves as a barrier to moisture and air. Potassium hydride may react violently with oxygen, CO, dimethyl sulfoxide, alcohols, and acids. Explosions can result from contact of these compounds with strong oxidizers. Potassium hydride is generally more reactive than sodium hydride.

• 廃棄物の処理

  Excess potassium or sodium hydride and waste material containing these substances should be placed in an appropriate container under an inert atmosphere, clearly labeled, and handled according to your institution's waste disposal guidelines. Experienced personnel can destroy small quantities of sodium hydride and potassium hydride by the careful dropwise addition of t-butanol or iso-propanol to a suspension of the metal hydride in an inert solvent such as toluene under an inert atmosphere such as argon. Great care must be taken in the destruction of potassium hydride because of its greater reactivity. The resulting mixture of metal alkoxide should be placed in an appropriate container, clearly labeled, and handled according to your institution's waste disposal guidelines.

ヒドリドカリウム 上流と下流の製品情報

ヒドリドカリウム 生産企業

Global(65)Suppliers

7693-26-7, ヒドリドカリウム キーワード