Dimethoxymethan

Gefahreninformationscode (GHS)

• Bildanzeige (GHS)

  

• Alarmwort

  Achtung

• Gefahrenhinweise

  H225：Flüssigkeit und Dampf leicht entzündbar.

• Sicherheit

  P210：Von Hitze, heißen Oberflächen, Funken, offenen Flammen und anderen Zündquellenarten fernhalten. Nicht rauchen.

  P233：Behälter dicht verschlossen halten.

  P240：Behälter und zu befüllende Anlage erden.

  P241：Explosionsgeschützte [elektrische/Lüftungs-/ Beleuchtungs-/...] Geräte verwenden.

  P242：Nur funkenfreies Werkzeug verwenden.

  P243：Maßnahmen gegen elektrostatische Entladungen treffen.

Dimethoxymethane Chemische Eigenschaften,Einsatz,Produktion Methoden

• ERSCHEINUNGSBILD

  LEICHT FLüCHTIGE, FARBLOSE FLüSSIGKEIT MIT CHARAKTERISTISCHEM GERUCH.

• PHYSIKALISCHE GEFAHREN

  Die Dämpfe sind schwerer als Luft und können sich am Boden ausbreiten. Fernzündung möglich.

• CHEMISCHE GEFAHREN

  Bildung explosionsfähiger Peroxide wahrscheinlich. Kann beim Erhitzen explodieren. Reagiert heftig mit starken Oxidationsmitteln.

• ARBEITSPLATZGRENZWERTE

  TLV: 1000 ppm (als TWA); (ACGIH 2005).
  MAK: 1000 ppm 3200 mg/m? Spitzenbegrenzung: überschreitungsfaktor II(2); Schwangerschaft: Gruppe C; (DFG 2006).
  

• AUFNAHMEWEGE

  Aufnahme in den Körper durch Inhalation der Dämpfe und über die Haut.

• INHALATIONSGEFAHREN

  Beim Verdampfen bei 20°C kann schnell eine gesundheitsschädliche Kontamination der Luft eintreten.

• WIRKUNGEN BEI KURZZEITEXPOSITION

  WIRKUNGEN BEI KURZZEITEXPOSITION:
  Die Substanz reizt die Augen, die Haut und die Atemwege. Möglich sind Auswirkungen auf das Zentralnervensystem. Exposition weit oberhalb der Arbeitsplatzgrenzwerte kann zu Bewusstlosigkeit führen.

• WIRKUNGEN NACH WIEDERHOLTER ODER LANGZEITEXPOSITION

  Die Flüssigkeit entfettet die Haut.

• LECKAGE

  Ausgelaufene Flüssigkeit möglichst in abdichtbaren Behältern sammeln. Reste mit Sand oder inertem Absorptionsmittel aufnehmen und an einen sicheren Ort bringen. NICHT in die Kanalisation spülen. Persönliche Schutzausrüstung: Umgebungsluftunabhängiges Atemschutzgerät.

• R-Sätze Betriebsanweisung:

  R11:Leichtentzündlich.
  R19:Kann explosionsfähige Peroxide bilden.
  R36:Reizt die Augen.
  R36/37/38:Reizt die Augen, die Atmungsorgane und die Haut.

• S-Sätze Betriebsanweisung:

  S16:Von Zündquellen fernhalten - Nicht rauchen.
  S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
  S33:Maßnahmen gegen elektrostatische Aufladungen treffen.
  S7/9:Behälter dicht geschlossen an einem gut gelüfteten Ort aufbewahren.
  S37/39:Bei der Arbeit geeignete Schutzhandschuhe und Schutzbrille/Gesichtsschutz tragen.

• Aussehen Eigenschaften

  C3H8O2; Methylal, Formaldehyddimethylacetal, Formal. Farblose Flüssigkeit mit charakteristischem Geruch.

• Gefahren für Mensch und Umwelt

  Reizt die Atemwege, Augen und die Haut. Wirkt narkotisierend .
  Sensibilisierung durch Hautkontakt möglich.
  Gefährliche Zersetzungsprodukte sind Peroxide.
  Leichtentzündlich.
  LD₅₀ (oral, Kaninchen): 5708 mg/kg

• Schutzmaßnahmen und Verhaltensregeln

  Geeignete Schutzhandschuhe als kurzzeitiger Spritzschutz.

• Verhalten im Gefahrfall

  Mit flüssigkeitsbindendem Material z.B. Rench Rapid aufnehmen. Der Entsorgung zuführen. Nachreinigen.
  Kohlendioxid, Pulver, Schaum.
  Brennbar. Mit Luft Bildung explosionsfähiger Gemische möglich.

• Erste Hilfe

  Nach Hautkontakt: Mit reichlich Wasser abwaschen.
  Nach Augenkontakt: Mit reichlich Wasser und geöffnetem Lidspalt mindestens 10 Minuten ausspülen. Augenarzt hinzuziehen.
  Nach Einatmen: Frischluft.
  Nach Verschlucken: Reichlich Wasser trinken lassen. Erbrechen auslösen. Arzt hinzuziehen.
  Nach Kleidungskontakt: Kontaminierte Kleidung sofort entfernen.
  Ersthelfer: siehe gesonderten Anschlag

• Sachgerechte Entsorgung

  Als halogenfreie, organische Lösemittelabfälle.

• Beschreibung

  Methylal is a colorless liquid with a pungent odor. Molecular weight= 76.11; Specific gravity (H2O:1)= 0.86;Boiling point=43.9℃; Freezing/Melting point=105℃; Vapor pressure 330 mmHg at 20℃; Flash point=32℃; Autoignition temperature=237℃. Explosive limits: LEL= 2.2%; UEL= 13.8%. Hazard Identification (based on NFPA-704 M Rating System): Health 2, Flammability 3, Reactivity 2. Soluble in water; solubility= 33%.

• Chemische Eigenschaften

  Dimethoxymethane, also called methylal, is a colorless flammable liquid with a low boiling point, low viscosity and excellent dissolving power. It is stable in the presence of alkalis and mild acids, and to high temperatures and pressures. It differs from other ethers in that it forms only minute omounts of peroxides. It will dissolve such synthetic resins as nitrocellulose, cellulose acetate and propionate, ethyl cellulose, vinyl, "Epons" and polystyrene, and also many of the natural gums and waxes. Methylal as a latent solvent is activated by the addition of esters, ketones or alcohols. Its evaporation rate, twice that of acetone, places this ether in a class with such solvents as acetone, methyl acetate and ethyl acetate in resin formulations.

• Physikalische Eigenschaften

  Dimethoxymethane appears as a clear colorless liquid with a pungent, chloroform-like odor. Flash point 0°F. Boiling point 42.3°C. Density 0.864 g / cm3 at 68°F (20°C). Vapors heavier than air.

• Verwenden

  Dimethoxymethane (Methylal) is a valuable extraction solvent for pharmaceutical products and a stable, inexpensive solvent for Grignard reactions. Methylal is stable under alkaline and mild acidic conditions. Its dissolving ability is stronger than ether, acetone, and methanol and azeotrope can dissolve nitrocellulose with high nitrogen content. Dimethoxymethane is mainly used in the production of anion-exchange resins, and also as solvents and special fuels.

• synthetische

  Dimethoxymethane synthesis is based on the liquid-phase acetalization reaction of methanol and formaldehyde. It can be manufactured by oxidation of methanol or by the reaction of formaldehyde with methanol. In aqueous acid, it is hydrolyzed back to formaldehyde and methanol.
  Reaction mechanisms and catalysis in the one-step synthesis of methylal via methanol oxidation
  Novel Porous Iron Molybdate Catalysts for Synthesis of Dimethoxymethane from Methanol: Metal Organic Frameworks as Precursors

• Application

  Dimethoxymethane is a versatile chemical with applications in many industries such as paints, perfume, resins, pharmacy, paint strippers, protective coatings, and fuel additives.
  It may be used in the synthesis of methoxymethyl (MOM) ethers.
  It may also be used as an external cross-linker to form microporous polymers.
  Reaction solvent or an extraction solvent manufacturing pharmaceuticals, aerosols, paints, varnishes and cleanings.
  Production of ion exchange resins, polyacetal as a chain length regulator.
  Glue Formulations fragrances and pesticides.
  Fuel Additive for smoke reduction.
  Blowing agent for PU Foams.

• Definition

  ChEBI: Dimethoxymethane is an acetal that is the dimethyl acetal derivative of formaldehyde. It is an acetal and a diether. It derives from a methanediol.

• Allgemeine Beschreibung

  Dimethoxymethane (DMM, methylal) is a biodegradable dimethyl acetal. It can be synthesized by acid catalyzed condensation of formaldehyde with methanol. It is amphiphilic in nature with low viscosity, surface tension and boiling point. It is a flammable, highly volatile solvent with good dissolving power. DMM is considered as a potential alternative fuel and fuel additive due to its high oxygen content and its ability to enhance the combustion characteristics of diesel and petrol. Its thermal diffusivity has been determined by photoacoustic method. Analysis of the molecular structure of DMM by electron diffraction technique shows that it has C2 symmetry with a gauche-gauche conformation.

• Air & Water Reaktionen

  Highly flammable. Water soluble.

• Reaktivität anzeigen

  Dimethoxymethane, an acetal, is incompatible with strong oxidizing agents and acids . Breaks down to formaldehyde and methanol in acidic solutions. A very dangerous fire hazard when exposed to heat, flame or oxidizing agents. May ignite or explode if heated with oxygen [Lewis].

• Health Hazard

  VAPOR: Irritating to eyes, nose and throat. Harmful if inhaled. LIQUID: Irritating to skin and eyes. Harmful if swallowed.

• Brandgefahr

  FLAMMABLE. A very dangerous fire hazard when exposed to heat, flame, or oxidzers. Moderately explosive when exposed to heat or flame. May ignite or explode when heated with oxygen. To fight fire, use foam, CO2, dry chemical. When heated to decomposition it emits acrid smoke and irritating fumes.

• Flammability and Explosibility

  Highly flammable

• Sicherheitsprofil

  Moderately toxic by subcutaneous route. Mildly toxic by ingestion and inhalation. Can cause injury to lungs, liver, kidneys, and the heart. A narcotic and anesthetic in high concentrations.
  Dimethoxymethane is considered to be of low hazard potential to humans given that no adverse effects or organ-specific toxicity were observed at inhalation exposures as high as 10 068 ppm (31 334 mg/m3) in rats, and considering the available information indicating a lack of genotoxic, mutagenic or developmental effects. As dimethoxymethane is considered to be of low hazard potential, the risk to human health is considered to be low.

• mögliche Exposition

  Vapors may form explosive mixture with air. Methylal may be able to form unstable and explosive peroxides. Heating may cause explosion. Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, epoxides. Hydrolyzes readily in presence of acids to generate aldehydes.

• Erste Hilfe

  If this chemical gets into the eyes, remove any contact lenses at once and irrigate immediately for at least 15 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts the skin, remove contaminated clothing and wash immediately with soap and water. Seek medical attention immediately. If this chemical has been inhaled, remove from exposure, begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR if heart action has stopped. Transfer promptly to a medical facility. When this chemical has been swallowed, get medical attention. Give large quantities of water and induce vomiting. Do not make an unconscious person vomit

• Source

  Methylal is a by-product in the synthesis of trioxane, an intermediate in the manufacture of polyacetal plastics (Albert et al., 2001).

• Lager

  Color Code—Red: Flammability Hazard: Store in a flammable liquid storage area or approved cabinet away from ignition sources and corrosive and reactive materials. Prior to working with this chemical you should be trained on its proper handling and storage. Before entering confined space where this chemical may be present, check to make sure that an explosive concentration does not exist. Methylal must be stored to avoid contact with strong oxidizers, such as chlorine, chlorine dioxide, bromine, nitrates and permanganates, since violent reactions occur. Store in tightly closed containers in a cool, well-ventilated area away from heat. Sources of ignition, such as smoking and open flames, are prohibited where methylal is handled, used, or stored. Metal containers involving the transfer of 5 gallons or more of methylal should be grounded and bonded. Drums must be equipped with self-closing valves, pressure vacuum bungs, and flame arresters. Use only nonsparking tools and equipment, especially when opening and closing containers of methylal. Wherever methylal is used, handled, manufactured, or stored, use explosion-proof electrical equipment and fittings.

• Versand/Shipping

  UN1234 Methylal, Hazard Class: 3; Labels: 3-Flammable liquid

• läuterung methode

  It is a volatile flammable liquid which is soluble in three parts of H2O, and is readily hydrolysed by acids. Purify it by shaking with an equal volume of 20% aqueous NaOH, stand for 20minutes, dry over fused CaCl2, filter and fractionally distil it through an efficient column. Store it over molecular sieves. [Buchler et al. Org Synth Coll Vol III 469 1955, Rambaud & Besserre Bull Soc Chim Fr 45 1955, IR: Wilmshurst Can J Chem 36 285 1958, Beilstein 1 IV 3026.]

• Inkompatibilitäten

  Forms explosive mixture with air. Methylal may be able to form unstable and explosive peroxides. Heating may cause explosion. Strong reaction with strong oxidizers, acids, causing fire and explosion hazard. Hydrolyzes readily in presence of acids to generate aldehydes.

• Waste disposal

  Concentrated waste containing no peroxides: discharge liquid at a controlled rate near a pilot flame. Concentrated waste containing peroxides: perforation of containers of the waste from a safe distance followed by open burning.

Dimethoxymethane Upstream-Materialien And Downstream Produkte

Dimethoxymethan Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

Global(373)Suppliers

109-87-5, Dimethoxymethane Verwandte Suche: