2-Methyl-3-butin-2-ol

Gefahreninformationscode (GHS)

• Bildanzeige (GHS)

  

• Alarmwort

  Achtung

• Gefahrenhinweise

  H225：Flüssigkeit und Dampf leicht entzündbar.

  H302：Gesundheitsschädlich bei Verschlucken.

  H318：Verursacht schwere Augenschäden.

  H336：Kann Schläfrigkeit und Benommenheit verursachen.

• Sicherheit

  P202：Vor Gebrauch alle Sicherheitshinweise lesen und verstehen.

  P210：Von Hitze, heißen Oberflächen, Funken, offenen Flammen und anderen Zündquellenarten fernhalten. Nicht rauchen.

  P280：Schutzhandschuhe/Schutzkleidung/Augenschutz tragen.

  P301+P312：BEI VERSCHLUCKEN: Bei Unwohlsein GIFTINFORMATIONSZENTRUM/Arzt/... (geeignete Stelle für medizinische Notfallversorgung vom Hersteller/Lieferanten anzugeben) anrufen.

  P305+P351+P338：BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen.

  P308+P313：BEI Exposition oder falls betroffen: Ärztlichen Rat einholen/ärztliche Hilfe hinzuziehen.

3-Methyl butynol Chemische Eigenschaften,Einsatz,Produktion Methoden

• R-Sätze Betriebsanweisung:

  R10:Entzündlich.
  R22:Gesundheitsschädlich beim Verschlucken.
  R41:Gefahr ernster Augenschäden.

• S-Sätze Betriebsanweisung:

  S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
  S39:Schutzbrille/Gesichtsschutz tragen.
  S16:Von Zündquellen fernhalten - Nicht rauchen.

• Chemische Eigenschaften

  colourless to light yellow liquid.
  Methylbutynol (3-Methyl butynol) is a colorless, transparent, and aromatic liquid that can be consumed at room temperature. It is soluble in water and fatty acids and miscible with acetone, benzene, carbon tetrachloride, and petroleum ether but insoluble in ammonia. Methylbutynol and water form an azeotrope with an azeotropic point of 91 °C in the methylbutynol composition of 74% and the water composition of 26%. Methylbutynol is chemically active and has the common reactions of alcohol groups and unsaturated triple bonds, such as addition, polymerization, esterification, and oxidation reactions.

• Verwenden

  2-Methyl-3-butyn-2-ol is used as an intermediate in the manufacture of products for the agrochemical and specialty chemical industry.

• Verwenden

  Stabilizer in chlorinated solvents, viscosity reducer and stabilizer, electroplating brightener, intermediate.

• Application

  Methylbutynol (3-Methyl butynol) is used as an intermediate in the pharmaceutical industry for the synthesis of the anticancer drug citricin. It is used as a raw material for the synthesis of pyrethroids in the pesticide industry and as a raw material in the synthesis of terpene perfumes. Because methylbutynol has good corrosion inhibition and synergistic effect, it can effectively prevent hydrogen embrittlement of metal. As an essential component of high-efficiency acidification corrosion inhibitor, it is widely used in the oil and gas industry. Methylbutynol can be applied as an acetylene carrier to safely and economically transport large acetylene quantities. This usage can be accomplished in three steps: Firstly, acetylene is stored in the form of methyl butanol by reacting the former with acetone. Secondly, the resulting methylbutynol is transported from the origin of acetylene to the place of consumption. Thirdly, acetylene and acetone can be obtained by cleavage of methylbutynol and separated to yield pure products for further applications.

• synthetische

  3-Methyl butynol is produced from Acetone and Acetylene in liquid Ammonia with Sodamide (or in Cellosolve with Potassium hydroxide). The process yields Methylbutynol which can be hydrogenated to Methylbutenol. 

• Allgemeine Beschreibung

  Colorless to straw yellow liquid.

• Air & Water Reaktionen

  Highly flammable.

• Reaktivität anzeigen

  3-Methyl butynol is an alcohol. Flammable and/or toxic gases are generated by the combination of alcohols with alkali metals, nitrides, and strong reducing agents. They react with oxoacids and carboxylic acids to form esters plus water. Oxidizing agents convert them to aldehydes or ketones. Alcohols exhibit both weak acid and weak base behavior. They may initiate the polymerization of isocyanates and epoxides.

• Hazard

  Flammable, dangerous fire risk.

• Health Hazard

  Contact will cause eye and skin irritation. Vapor exposure may cause eye and respiratory tract irritation.

• Brandgefahr

  Special Hazards of Combustion Products: Irritating and toxic gases, such as carbon dioxide and carbon monoxide, may be produced in fire.

• Flammability and Explosibility

  Highly flammable

• Synthese

  Three parts of the strong basic anion exchange resin Amberlite IRA400 were suspended in 30 parts of 7% sodium hydroxide solution to change to OH type. After washing to neutral with water, the resin was suspended in methanol, and after 15–60 min, methanol was discharged. The treatment with methanol was repeated as described above until the water content of the effluent methanol was less than 0.1% and the water content of the ion exchange resin was less than 0.2%. The tubular reactor was filled with the ion exchange resin, and then acetone was saturated with acetylene, and liquid ammonia was introduced into the reactor at 2.5 MPa and 40 °C. Excess acetylene in reactants was used to reduce the side reaction of acetone. After ethynylation, the reaction solution was subjected to a flash evaporation at 50 °C. The remaining solution was distilled to obtain methylbutynol (3-methyl butynol).
  

3-Methyl butynol Upstream-Materialien And Downstream Produkte

2-Methyl-3-butin-2-ol Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

Global(317)Suppliers

115-19-5, 3-Methyl butynol Verwandte Suche: