Dodecylmethacrylat

Bezeichnung:Dodecylmethacrylat

CAS-Nr142-90-5

Englisch Name:Dodecyl Methacrylate

CBNumberCB7227264

SummenformelC16H30O2

Molgewicht254.41

MOL-Datei142-90-5.mol

Synonyma

Dodecylmethacrylat

Dodecylmethacrylat physikalisch-chemischer Eigenschaften

Schmelzpunkt	-7 °C (lit.)
Siedepunkt	142 °C/4 mmHg (lit.)
Dichte	0.868 g/mL at 25 °C (lit.)
Dampfdruck	0.06Pa at 20℃
Brechungsindex	n20/D 1.445(lit.)
Flammpunkt	>230 °F
storage temp.	Inert atmosphere,2-8°C
Löslichkeit	Chloroform (Slightly), Methanol (Slightly)
Aggregatzustand	Liquid
Farbe	Clear light yellow
Wasserlöslichkeit	insoluble
BRN	1708160
LogP	6.68 at 20℃
CAS Datenbank	142-90-5(CAS DataBase Reference)
NIST chemische Informationen	2-Propenoic acid, 2-methyl-, dodecyl ester(142-90-5)
EPA chemische Informationen	Lauryl methacrylate (142-90-5)

Sicherheit

Kennzeichnung gefährlicher	Xi,N
R-Sätze:	36/37/38-50/53
S-Sätze:	26-28-60-61-28B
RIDADR	UN 3082 9/PG 3
WGK Germany	2
RTECS-Nr.	OZ4300000
TSCA	TSCA listed
HazardClass	9
PackingGroup	III
HS Code	29161490
Giftige Stoffe Daten	142-90-5(Hazardous Substances Data)

Gefahreninformationscode (GHS)

Dodecyl Methacrylate Chemische Eigenschaften,Einsatz,Produktion Methoden

R-Sätze Betriebsanweisung:
R36/37/38:Reizt die Augen, die Atmungsorgane und die Haut.
R50/53:Sehr giftig für Wasserorganismen, kann in Gewässern längerfristig schädliche Wirkungen haben.
S-Sätze Betriebsanweisung:
S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
S28:Bei Berührung mit der Haut sofort abwaschen mit viel . . . (vom Hersteller anzugeben).
S60:Dieses Produkt und sein Behälter sind als gefährlicher Abfall zu entsorgen.
S61:Freisetzung in die Umwelt vermeiden. Besondere Anweisungen einholen/Sicherheitsdatenblatt zu Rate ziehen.
Chemische Eigenschaften
clear colorless to yellowish liquid
Verwenden
Miniemulsion polymerization of laurel methacrylate has been reported. Atom transfer radical polymerization and consecutive block copolymerization with methyl methacrylate has been investigated. Preparation of LMA based monolithic columns for CEC has been reported. LMA is used as a co-stabilizer to retard Ostwald ripening effect.
Application
Dodecyl methacrylate (Dodecyl 2-methylacrylate; Lauryl methacrylate) could be a crosslinker in preparing tough polyacrylamide hydrogels. It can also be used in the following industries: In the adhesive industry, it is used for Synthetic sealants, adhesive glue agents; In the coatings industry, it is used for renewing resin/coating, coating material at low temperatures for cars; In the oil industry, it is used as a synthetic oil-soluble drag-reduction agent; In the rubber industry, it is used as a composite stabilizer; In the oil lubricant industry, it can be used as lubricating oil; In the papermaking industry, it is used as a composite stabilizer; In fiber processing industries, it is used for composite spinning oil, synthetic high waterproof, and oil-proof fabric finishing agents; In the plastic industry, it is used for the synthesis of monomers.
Vorbereitung Methode
Putting the main ingredients of dodecanol and methacrylic acid into an esterification reaction vessel, adding a solvent (toluene or xylene), adding a catalyst (phosphoric acid or p-toluenesulfonic acid), adding an inhibitor A (copper chloride), stirring the reaction, and obtaining a reaction material. The esterification reaction vessel is evacuated, the pressure in the esterification reaction vessel is controlled to be -0.04~-0.08Mpa, the temperature in the esterification reaction vessel is increased until reflux liquid flows out, and the temperature is kept until no reflux liquid flows out or until the acid value in the reaction solution is detected to be 30~50mgKOH/g. Then the temperature is lowered to room temperature. The reaction material is transferred to a water washing container, an alkali solution is added, the pH value of the reaction material is controlled to be 7~8, and the reaction material is allowed to stand. After the reaction material is layered, the wastewater in the lower layer is discharged. The reaction material without wastewater is transferred to a distillation container, the inhibitor B (2-tert-butyl-4-methylphenol) is added, the distillation container is evacuated, and toluene is removed by distillation to obtain the product.
Allgemeine Beschreibung
Liquid. Floats on water.
Reaktivität anzeigen
Dodecyl 2-methylacrylate is an ester. Esters react with acids to liberate heat along with alcohols and acids. Strong oxidizing acids may cause a vigorous reaction that is sufficiently exothermic to ignite the reaction products. Heat is also generated by the interaction of esters with caustic solutions. Flammable hydrogen is generated by mixing esters with alkali metals and hydrides. Tends to polymerize. Oxidizing and reducing agents may initiate polymerization. Reaction may also occur when heated [USCG, 1999].
Health Hazard
Inhalation temporarily reduces blood pressure from 5 to 25%, increases respiratory rate, decreases heart rate, and causes some EKG changes. Liquid may cause irritation of eyes and skin. May be harmful if swallowed.
Brandgefahr
Behavior in Fire: Heat can induce polymerization with rapid release of energy. Sealed containers may rupture explosively.
Flammability and Explosibility
Non flammable
läuterung methode
Purify the ester by fractional distillation in a high vacuum. Add 0.05% of hydroquinone monomethyl ether as stabilizer. [Rehberg & Fischer Ind Eng Chem 40 1430 1948, Beilstein 2 III 1290, 2 IV 1528.]

Dodecyl Methacrylate Upstream-Materialien And Downstream Produkte

Dodecylmethacrylat Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

142-90-5, Dodecyl Methacrylate Verwandte Suche:

Send Inquriy