Amoxicillin trihydrate

Gefahreninformationscode (GHS)

• Bildanzeige (GHS)

  

• Alarmwort

  Achtung

• Gefahrenhinweise

  H317：Kann allergische Hautreaktionen verursachen.

  H334：Kann bei Einatmen Allergie, asthmaartige Symptome oder Atembeschwerden verursachen.

• Sicherheit

  P261：Einatmen von Staub vermeiden.

  P272：Kontaminierte Arbeitskleidung nicht außerhalb des Arbeitsplatzes tragen.

  P280：Schutzhandschuhe/Schutzkleidung/Augenschutz tragen.

  P284：Atemschutz tragen.

  P302+P352：BEI BERÜHRUNG MIT DER HAUT: Mit viel Wasser/... (Hersteller kann, falls zweckmäßig, ein Reinigungsmittel angeben oder, wenn Wasser eindeutig ungeeignet ist, ein alternatives Mittel empfehlen) waschen.

  P333+P313：Bei Hautreizung oder -ausschlag: Ärztlichen Rat einholen/ärztliche Hilfe hinzuziehen.

Amoxicillin trihydrate Chemische Eigenschaften,Einsatz,Produktion Methoden

• R-Sätze Betriebsanweisung:

  R42/43:Sensibilisierung durch Einatmen und Hautkontakt möglich.

• S-Sätze Betriebsanweisung:

  S36:DE: Bei der Arbeit geeignete Schutzkleidung tragen.
  S36/37:Bei der Arbeit geeignete Schutzhandschuhe und Schutzkleidung tragen.
  S22:Staub nicht einatmen.

• Beschreibung

  Amoxicillin was synthesized by Beecham Research Laboratories in 1968. A hydroxyl group was introduced on the benzene ring of ampicillin. Amoxicillin shows about a twofold higher serum concentration than ampicillin when administered orally. It was shown by double-blind comparative studies with ampicillin that amoxicillin was as effective as ampicillin when administered at half the dose of ampicillin.

• Chemische Eigenschaften

  White to Off-White Solid

• Originator

  Arnoxil,Bencard,UK,1972

• Verwenden

  Amoxicillin trihydratesemi-synthetic antibiotic related to Penicillin which has antibacterial poperties. It is used for treatment of a variety of bacterial infections. It is used as a pharmaceutical product as a antibiotic agent, anti-infective drug raw materials.

• Verwenden

  Semi-synthetic antibiotic related to Penicillin. Antibacterial.

• Definition

  ChEBI: A hydrate that is the trihydrate form of amoxicillin; a semisynthetic antibiotic, used either alone or in combination with potassium clavulanate (under the trade name Augmentin) for treatment of a variety of bacterial infections.

• Manufacturing Process

  Ethyl chlorocarbonate (2.2 ml) was added to an ice cold solution of O,N-dibenzyloxycarbonyl-p-oxy-dl-α-aminophenylacetic acid (10 grams) and triethylamine (3.85 ml) in dry acetone (193 ml). The mixture was stirred at 0°C for 5 minutes during which triethylamine hydrochloride precipitated. The suspension was cooled to -30°C and stirred vigorously while adding as rapidly as possible an ice cold solution of 6-aminopenicillanic acid (5.85 grams) in 3% aqueous sodium bicarbonate (193 ml), the temperature of the mixture never being allowed to rise above 0°C. The resulting clear solution was stirred for 30 minutes at 0°C, and then for a further 30 minutes, without external cooling, and finally extracted with diethyl ether (3 x 200 ml) only the aqueous phase being retained.
  This aqueous solution was brought to pH 2 by the addition of hydrochloric acid and the 6-(O,N-dibenzyloxycarbonyl-p-oxy-dl-α- aminophenylacetamido)penicillanic acid so liberated was extracted into diethyl ether (50 ml and 2 portions of 30 ml). The ether phase was washed with water (3 x 5 ml) and the water washings were discarded.
  Finally, the penicillin was converted to the sodium salt by shaking the ether solution with sufficient 3% sodium bicarbonate to give a neutral aqueous phase, separating the latter and evaporating it at low pressure and temperature below 20°C. The product was finally dried over phosphorus pentoxide in vacuo to give sodium 6-(O,N-dibenzyloxycarbonyl-p-oxy-dl-α- aminophenylacetamido)-penicillanate (9.2 grams).
  A suspension of palladium on calcium carbonate (36 grams of 5%) in water (150 ml) was shaken in an atmosphere of hydrogen at room temperature and atmospheric pressure for 1 hour. A neutral solution of sodium 6-(O,Ndibenzyloxycarbonyl- p-oxy-dl-α-aminophenylacetamido)penicillanate (9 grams) in water (100 ml) was then added and shaking in hydrogen was resumed for one hour. The suspension was then filtered and the collected catalyst was washed well with water without being allowed to suck dry between washings. The combined filtrate and washings were then brought to pH 6.5 with dilute hydrochloric acid and evaporated to dryness at reduced pressure and temperatures below 20°C. The product was finally dried over phosphorus pentoxide in vacuo to give a solid (5.4 grams) containing 6-(phydroxy- dl-α-aminophenylacetamido)penicillanic acid.

• Trademarks

  Amoxil (GlaxoSmithKline); Dispermox (Ranbaxy); Larotid (GlaxoSmithKline); Trimox (Apothecon) [Name previously used: Amoxycillin.].

• Therapeutic Function

  Antibacterial

• Kontakt-Allergie

  Amoxicillin is both a topical and a systemic sensitizer. Topical sensitization occurs in health care workers. Systemic drug reactions are frequent, such as urticaria, maculo-papular rashes, baboon syndrome, acute generalized exanthematous pustulosis, or even toxic epidermal necrosis. Cross-reactivity is common with ampicillin, and can occur with other penicillins.

• Sicherheitsprofil

  Moderately toxic. An experimental teratogen. Other experimental reproductive effects. When heated to decomposition it emits toxic fumes of SOx and NOx.

Amoxicillin trihydrate Upstream-Materialien And Downstream Produkte

Amoxicillin trihydrate Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

Global(581)Suppliers

61336-70-7, Amoxicillin trihydrate Verwandte Suche: