4-Aminophenol

Gefahreninformationscode (GHS)

• Bildanzeige (GHS)

  

• Alarmwort

  Warnung

• Gefahrenhinweise

  H317：Kann allergische Hautreaktionen verursachen.

  H341：Kann vermutlich genetische Defekte verursachen.

  H373：Kann die Organe schädigen bei längerer oder wiederholter Exposition.

  H410：Sehr giftig für Wasserorganismen mit langfristiger Wirkung.

• Sicherheit

  P273：Freisetzung in die Umwelt vermeiden.

  P280：Schutzhandschuhe/Schutzkleidung/Augenschutz tragen.

  P301+P312：BEI VERSCHLUCKEN: Bei Unwohlsein GIFTINFORMATIONSZENTRUM/Arzt/... (geeignete Stelle für medizinische Notfallversorgung vom Hersteller/Lieferanten anzugeben) anrufen.

  P302+P352：BEI BERÜHRUNG MIT DER HAUT: Mit viel Wasser/... (Hersteller kann, falls zweckmäßig, ein Reinigungsmittel angeben oder, wenn Wasser eindeutig ungeeignet ist, ein alternatives Mittel empfehlen) waschen.

  P308+P313：BEI Exposition oder falls betroffen: Ärztlichen Rat einholen/ärztliche Hilfe hinzuziehen.

4-Aminophenol Chemische Eigenschaften,Einsatz,Produktion Methoden

• R-Sätze Betriebsanweisung:

  R20/22:Gesundheitsschädlich beim Einatmen und Verschlucken.
  R50/53:Sehr giftig für Wasserorganismen, kann in Gewässern längerfristig schädliche Wirkungen haben.
  R68:Irreversibler Schaden möglich.
  R40:Verdacht auf krebserzeugende Wirkung.

• S-Sätze Betriebsanweisung:

  S28:Bei Berührung mit der Haut sofort abwaschen mit viel . . . (vom Hersteller anzugeben).
  S36/37:Bei der Arbeit geeignete Schutzhandschuhe und Schutzkleidung tragen.
  S60:Dieses Produkt und sein Behälter sind als gefährlicher Abfall zu entsorgen.
  S61:Freisetzung in die Umwelt vermeiden. Besondere Anweisungen einholen/Sicherheitsdatenblatt zu Rate ziehen.

• Beschreibung

  4-Aminophenol, also known as 4-hydroxyaniline, is an organic building block. Its quantification in water samples upto the detection limit of 8×10-10mol l-1 has been proposed by employing single-wall carbon nanotubes (SWNT)-nafion film coated glassy carbon electrodes. It is present as the main contaminant in pharmaceutical formulations of paracetamol. High-performance liquid chromatographic (HPLC) method with amperometric detection has been reported for its determination in various analgesic formulations. It has been reported to be formed from the reduction of 4-nitrophenol (Nip) under metal-free conditions catalyzed by N-doped graphene (NG).

• Chemische Eigenschaften

  o-Aminophenol appears as colorless needles or as white crystalline substance turning tan to brown on exposure to air. slightly soluble in water and ethanol, insoluble in benzene and chloroform, and quickly turns brown when dissolved in lye.

• Verwenden

  4-Aminophenol is suitable for use in the synthesis of 2,2-bis(4-aminophenoxy) benzonitrile [4-APBN], a monomer required for the preparation of series of polyamides and poly(amide-imide)s. It may be used as derivatization reagent to improve the ionization of aliphatic and aromatic aldehydes by paper spray ionization mass spectrometry.

• synthetische

  Conventionally 4-aminophenol was manufactured using iron-acid reduction of p-nitrobenzene. Reduction using iron-acid is a multi-step process. The modern method is the catalytic dehydrogenation of nitrobenzene to 4-aminophenol using a noble metal catalyst in the presence of an acidic medium. This method also produces aniline as a side-product. The advantage of a reduction using a noble metal catalyst is that it involves a single step reaction, an environment friendly and more efficient process, as there is no evolution of an environmentally harmful gas. Moreover, the side-product aniline is also a valuable chemical.
  
  synthesis of 4-aminophenol

• Definition

  ChEBI: 4-aminophenol is an amino phenol (one of the three possible isomers) which has the single amino substituent located para to the phenolic -OH group. It has a role as a metabolite and an allergen.

• Application

  The main and the most significant use of 4-Aminophenol is for the manufacturing of Paracetamol, an analgesic and antipyretic drug. In addition to paracetamol, it is a key element in the synthesis of pharmaceutical ingredients and important industrial chemicals like Acebutolol, Ambroxol, Sorafenib and so on.
  4-Aminophenol is used as a dye for textiles, hair, furs and feathers, and is also used as a developing agent in photography for creating black and white images. It acts as a corrosion inhibitor in paints and as anti-corrosive lubricating agent in 2-cycle engines. It is also used as a wood stain, giving rose-like colour to timber. p-Aminophenol is one of key ingredients for synthesis of rubber antioxidants. Moreover, it is often used as a reagent for analysing metals like Copper, Magnesium, Vanadium and Gold, compounds like Nitrites and Cyanates, and antioxidants.

• Synthesis Reference(s)

  Synthesis, p. 285, 1971
  Tetrahedron Letters, 34, p. 2441, 1993 DOI: 10.1016/S0040-4039(00)60436-7

• Allgemeine Beschreibung

  P-aminophenol appears as white or reddish-yellow crystals or light brown powder. Turns violet when exposed to light. (NTP, 1992)

• Air & Water Reaktionen

  Insoluble in water.

• Reaktivität anzeigen

  Heat (decomposition forming HCN, nitrous vapors, CO); water (CO2); reacts violently with acids, bases, alcohols and amines causing fire and explosion hazards [Handling Chemicals Safely 1980 p. 647].

• Health Hazard

  4-Aminophenol is of moderately low toxicity but has caused dermal sensitization and kidney injury; the potential for producing methemoglobin is of relatively minor importance.
  The oral LD50 in rats was 671 mg/kg.1 Effects included central nervous system depression. A solution of 2.5% applied to abraded skin of rabbits was a mild irritant.1 p- Aminophenol caused dermal sensitization in guinea pigs, and skin sensitization has been reported in humans.2,3 The dermal LD50 in rabbits was greater than 8 g/kg, which strongly suggests that absorption through the skin is minimal.4 Single nonlethal acute doses in rats produced proximal renal tubular necrosis of the pars recta.

• Brandgefahr

  Flash point data are not available for 4-Aminophenol. 4-Aminophenol is probably combustible.

• Flammability and Explosibility

  Non flammable

• Kontakt-Allergie

  This hair dye is frequently implicated in contact dermatitis in hairdressers, customers, or people sensitized to para-phenylenediamine, by the way of “blackhenna” temporary tattoos.

• Sicherheitsprofil

  Poison by ingestion, subcutaneous, and intraperitoneal routes. An experimental teratogen. Other experimental reproductive effects. An allergen and skin and eye irritant. Mutation data reported. Can cause contact dermatitis, bronchial asthma, and methemoglobinemia with cyanosis. When heated to decomposition it emits toxic fumes of NOx,.

• mögliche Exposition

  Workers may be exposed to oAminophenol during its use as a chemical intermediate; in the manufacture of azo and sulfur dyes; and in the photographic industry. There is potential for consumer exposure to o-Aminophenol because of its use in dyeing hair, fur, and leather. The compound is a constituent of 75 registered cosmetic products suggesting the potential for widespread consumer exposure. p-Aminophenol is used mainly as a dye, dye intermediate and as a photographic developer; and in small quantities in analgesic drug preparation. Consumer exposure to p-aminophenol may occur from use as a hairdye or as a component in cosmetic preparations. m-Aminophenol is used mainly as a dye intermediate.

• Solubility in organics

  Very soluble in dimethylsulfoxide Soluble in acetonitrile, ethyl acetate, and acetone Slightly soluble in toluene, diethyl ether, and ethanol Negligible solubility in benzene and chloroform

• Versand/Shipping

  UN2512 Aminophenols (o-; m-; p-), Hazard Class: 6.1; Labels: 6.1-Poisonous materials

• läuterung methode

  Crystallise it from EtOH, then water, excluding oxygen. It sublimes at 110o/0.3mm. It has been purified by chromatography on alumina with a 1:4 (v/v) mixture of absolute EtOH/*benzene as eluent. [Beilstein 13 IV 1014.]

• Inkompatibilitäten

  These phenol/cresol materials can react with oxidizers; reaction may be violent. Incompatible with strong reducing substances such as alkali metals, hydrides, nitrides, and sulfides. Flammable gas (H2) may be generated, and the heat of the reaction may cause the gas to ignite and explode. Heat may be generated by the acidbase reaction with bases; such heating may initiate polymerization of the organic compound. Reacts with boranes, alkalies, aliphatic amines, amides, nitric acid, sulfuric acid. Phenols are sulfonated very readily (e.g., by concentrated sulfuric acid at room temperature). These reactions generate heat. Phenols are also nitrated very rapidly, even by dilute nitric acid and can explode when heated. Many phenols form metal salts that may be detonated by mild shock.

• Waste disposal

  Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. All federal, state, and local environmental regulations must be observed.

4-Aminophenol Upstream-Materialien And Downstream Produkte

4-Aminophenol Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

Global(712)Suppliers

123-30-8, 4-Aminophenol Verwandte Suche: