Dibismuttrioxid

Gefahreninformationscode (GHS)

• Bildanzeige (GHS)

  

• Alarmwort

  Warnung

• Gefahrenhinweise

  H303：May be harmfulif swallowed

• Sicherheit

  P261：Einatmen von Staub vermeiden.

  P305+P351+P338：BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen.

Bismuth(III) Oxide Chemische Eigenschaften,Einsatz,Produktion Methoden

• R-Sätze Betriebsanweisung:

  R36/37/38:Reizt die Augen, die Atmungsorgane und die Haut.
  R20/21/22:Gesundheitsschädlich beim Einatmen,Verschlucken und Berührung mit der Haut.

• S-Sätze Betriebsanweisung:

  S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
  S36/37:Bei der Arbeit geeignete Schutzhandschuhe und Schutzkleidung tragen.
  S36:DE: Bei der Arbeit geeignete Schutzkleidung tragen.

• Chemische Eigenschaften

  Bismuth(III) oxide is the compound produced by heating the metal, or its carbonate, in air. It is definitely a basic oxide, dissolving readily in acid solutions, and unlike the arsenic or antimony compounds, not amphiprotic in solution, although it forms stoichiometric addition compounds on heating with oxides of a number of other metals. It exists in three modifications, white rhombohedral, yellow rhombohedral, and gray-black cubical. Bismuth(II) oxide, BiO, has been produced by heating the basic oxalate.

• Chemische Eigenschaften

  Heavy, Yellow Powder

• Physikalische Eigenschaften

  Yellow monoclinic crystal or powder; density 8.90 g/cm³; melts at 817°C; vaporizes at 1,890°C; insoluble in water; soluble in acids.

• Occurrence

  Bismuth trioxide occurs in nature as mineral bismite. The oxide is used in fireproofing of papers and polymers; in enameling cast iron ceramic; and in disinfectants.

• Verwenden

  In disinfectants, magnets, glass, rubber vulcanization; in fireproofing of papers and polymers; in catalysts.

• Verwenden

  Bismuth(III) oxide is used in the preparation of BiFeO3perovskite nanoparticles. It finds use in disinfectants, magnets, glass, rubber, vulcanization, fireproofing papers and polymers and catalysts. Bismuth trioxide brings about the "dragon's eggs" effect in fireworks, as a replacement of red lead. Bismuth(III) compounds are attractive reagents and catalysts in organic synthesis because of their low cost and ease of handling. Bismuth trioxide nanoparticles also play an important role in high energy gas generators. The alpha crystalline form of bismuth(III) oxide has p-type electronic conductivity.

• synthetische

  Bismuth trioxide is commercially made from bismuth subnitrate. The latter is produced by dissolving bismuth in hot nitric acid. Addition of excess sodium hydroxide followed by continuous heating of the mixture precipitates bismuth trioxide as a heavy yellow powder. Also, the trioxide can be prepared by ignition of bismuth hydroxide.

• Allgemeine Beschreibung

  Bismuth (III) oxide is a yellow, monoclinic crystalline powder. It is insoluble in water and hydroxide solutions but dissolves in acids to form bismuth (III) salts. It can be prepared by heating bismuth in air or by heating hydroxides, carbonates or nitrates of bismuth.

• Structure and conformation

  Bismuth(III) Oxides are the deeply studied class of bismuth compounds, and they present four different phases. At room temperature, monoclinic α-Bi2O3 is the common stable phase with a polymeric-distorted layered structure composed of pentacoordinate bismuth atoms enclosed into pseudo-octahedral units. At a temperature higher than 710 °C, the α phase is converted into the cubic δ phase, which has a defective structure with random oxygen vacancies. The β phase and several oxygen-rich forms are closely related to the δ phase. In particular, the vacancy structures of highly defected bismuth oxides are some sites filled with O?2 and Bi(III) and Bi (V) sites. Bismuth oxide γ-phase also shows a cubic structure, but it is highly unstable and hard to synthesize without supporting it onto other oxides or metallic species. The other two polymorphic metastable bismuth oxide phases are known as the ω phase, stable at temperatures higher than 800 °C and the ε phase, isolated in 2006 by Cornei and co-workers[1].
  

• Einzelnachweise

  [1] Mattia Bartoli, Alberto Tagliaferro, Pravin Jagdale. “A Short Review on Biomedical Applications of Nanostructured Bismuth Oxide and Related Nanomaterials.” Materials 13 22 (2020).

Bismuth(III) Oxide Upstream-Materialien And Downstream Produkte

Dibismuttrioxid Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

Global(516)Suppliers

1304-76-3, Bismuth(III) Oxide Verwandte Suche: