Orotsure

Gefahreninformationscode (GHS)

• Bildanzeige (GHS)

  

• Alarmwort

  Warnung

• Gefahrenhinweise

  H302：Gesundheitsschädlich bei Verschlucken.

  H315：Verursacht Hautreizungen.

  H319：Verursacht schwere Augenreizung.

  H335：Kann die Atemwege reizen.

• Sicherheit

  P302+P352：BEI BERÜHRUNG MIT DER HAUT: Mit viel Wasser/... (Hersteller kann, falls zweckmäßig, ein Reinigungsmittel angeben oder, wenn Wasser eindeutig ungeeignet ist, ein alternatives Mittel empfehlen) waschen.

  P305+P351+P338：BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen.

Orotic acid Chemische Eigenschaften,Einsatz,Produktion Methoden

• R-Sätze Betriebsanweisung:

  R22:Gesundheitsschädlich beim Verschlucken.
  R36/37/38:Reizt die Augen, die Atmungsorgane und die Haut.

• S-Sätze Betriebsanweisung:

  S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
  S36/37/39:Bei der Arbeit geeignete Schutzkleidung,Schutzhandschuhe und Schutzbrille/Gesichtsschutz tragen.
  S22:Staub nicht einatmen.
  S37/39:Bei der Arbeit geeignete Schutzhandschuhe und Schutzbrille/Gesichtsschutz tragen.

• Chemische Eigenschaften

  white crystalline powder

• Originator

  Lactinium, Roland

• Verwenden

  An intermediate in de novo pyrimidine biosynthesis.

• Verwenden

  hepatoprotectant, uricosuric agent

• Verwenden

  Orotic acid is an intermediate in de novo pyrimidine biosynthesis that may be used to study the specificity and kinetics of orotate phosphoribosyltransferase (OPRT) which catalyzes the reversible phosphoribosyl transfer from 5?-phospho-α-d-ribose 1?-diphosphate (PRPP) to orotic acid (OA), forming pyrophosphate and orotidine 5?-monophosphate (OMP). It is used as a starting material for the potential commercial bioproduction of uridine 5?-monophosphate (UMP) by microbes such as Corynebacterium ammoniagenes (ATCC 6872) or Saccharomyces cerevisiae. It may be used to study the AMPK/SREBP-1 dependent cell signaling pathway and transcription regulation mechanisms that induce hepatic lipogenesis.

• Definition

  ChEBI: A pyrimidinemonocarboxylic acid that is uracil bearing a carboxy substituent at position C-6.

• Manufacturing Process

  91.7 g (0.5 mol) of trichloroacetyl chloride was cooled to -35°C in a glass vessel by means of a cooling brine. In the course of 3 h, 27.0 g (0.06 mol) of pure ketene was introduced through a tube. After completion of the reaction, the vessel was immediately put under dry nitrogen to prevent penetration of moisture. So γ,γ,γ-trichloroacetoacetylchloride was produced.
  The reaction mixture containing the γ,γ,γ-trichloroacetoacetyl chloride was transfered under nitrogen to a dropping funnel and in the course of 15 min was added with vigorous agitation to a suspension of 69.0 g (1.15 mole) of urea in 90.0 g of anhydrous acetic acid. Water cooling was used so that the reaction temperature would not exceed 40°C. After completion of the addition, the reaction mixture was heated as rapidly as possible to 115°C, and held at this temperature for 30 min.
  Subsequently there was cooling and one more 99.0 g of glacial acetic acid and 180.0 g of water were added. The precipitated 6-trichloromethyluracil was filtered off and dried at 60°C in a vacuum drying cabinet. The yield was 91.0 g or 80%.
  In a glass vessel equipped with an agitator, thermometer and pH electrode, 500 ml of water was placed and heated to 80°C. 50 g of 6trichloromethyluracil was then added. By means of the pH electrode, the addition of sodium hydroxide was automatically controlled so that the pH value throughout the whole hydrolysis was 6.5. Into, 165 ml of 5 N NaOH was consumed. Finally, the hydrolysis solution was cooled and the precipitated sodium orotate filtered off.
  The crude sodium orotate was again suspended at 80°C in water and brought into solution (pH 10.5) by addition of 30 ml of 5 N NaOH. After treatment with active charcoal, the solution was acidified with 30.0 g of 50% sulfuric acid. The solution was then cooled. The orotic acid was filtered off and carefully washed with water. After drying, 20.5 g of orotic acid, having a purity of 99.3% (titration) was obtained. This corresponds to a 60% yield.

• Therapeutic Function

  Hepatoprotectant

• Synthesis Reference(s)

  Journal of the American Chemical Society, 69, p. 1382, 1947 DOI: 10.1021/ja01198a042

• Allgemeine Beschreibung

  White crystals or crystalline powder.

• Air & Water Reaktionen

  Slightly soluble in water.

• Reaktivität anzeigen

  Carboxylic acids, such as Orotic acid, donate hydrogen ions if a base is present to accept them. They react in this way with all bases, both organic (for example, the amines) and inorganic. Their reactions with bases, called "neutralizations", are accompanied by the evolution of substantial amounts of heat. Neutralization between an acid and a base produces water plus a salt. Carboxylic acids with six or fewer carbon atoms are freely or moderately soluble in water; those with more than six carbons are slightly soluble in water. Soluble carboxylic acid dissociate to an extent in water to yield hydrogen ions. The pH of solutions of carboxylic acids is therefore less than 7.0. Many insoluble carboxylic acids react rapidly with aqueous solutions containing a chemical base and dissolve as the neutralization generates a soluble salt. Carboxylic acids in aqueous solution and liquid or molten carboxylic acids can react with active metals to form gaseous hydrogen and a metal salt. Such reactions occur in principle for solid carboxylic acids as well, but are slow if the solid acid remains dry. Even "insoluble" carboxylic acids may absorb enough water from the air and dissolve sufficiently in Orotic acid to corrode or dissolve iron, steel, and aluminum parts and containers. Carboxylic acids, like other acids, react with cyanide salts to generate gaseous hydrogen cyanide. The reaction is slower for dry, solid carboxylic acids. Insoluble carboxylic acids react with solutions of cyanides to cause the release of gaseous hydrogen cyanide. Flammable and/or toxic gases and heat are generated by the reaction of carboxylic acids with diazo compounds, dithiocarbamates, isocyanates, mercaptans, nitrides, and sulfides. Carboxylic acids, especially in aqueous solution, also react with sulfites, nitrites, thiosulfates (to give H2S and SO3), dithionites (SO2), to generate flammable and/or toxic gases and heat. Their reaction with carbonates and bicarbonates generates a harmless gas (carbon dioxide) but still heat. Like other organic compounds, carboxylic acids can be oxidized by strong oxidizing agents and reduced by strong reducing agents. These reactions generate heat. A wide variety of products is possible. Like other acids, carboxylic acids may initiate polymerization reactions; like other acids, they often catalyze (increase the rate of) chemical reactions.

• Brandgefahr

  Flash point data for Orotic acid are not available; however, Orotic acid is probably combustible.

• Sicherheitsprofil

  Moderately toxic by ingestion, intraperitoneal, and intravenous routes. Mutation data reported. Whenheated to decomposition it emits toxic fumes of NOx.

Orotic acid Upstream-Materialien And Downstream Produkte

Orotsure Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

Global(474)Suppliers

65-86-1, Orotic acid Verwandte Suche: