N-Nitroso-N-phenylhydroxylamin,Ammoniumsalz

Bezeichnung:N-Nitroso-N-phenylhydroxylamin,Ammoniumsalz

CAS-Nr135-20-6

Englisch Name:Cupferron

CBNumberCB5679513

SummenformelC6H9N3O2

Molgewicht155.15

MOL-Datei135-20-6.mol

Synonyma

N-Nitroso-N-phenylhydroxylamin, Ammoniumsalz

N-Nitroso-N-phenylhydroxylamin,Ammoniumsalz

N-Nitroso-N-phenylhydroxylamin,Ammoniumsalz physikalisch-chemischer Eigenschaften

Schmelzpunkt	150-155 °C (dec.) (lit.)
Siedepunkt	278.95°C (rough estimate)
Dichte	1.3092 (rough estimate)
Brechungsindex	1.6500 (estimate)
storage temp.	2-8°C
Löslichkeit	well soluble in water and ethanol.
Aggregatzustand	Powder
Farbe	Needles from water
Wasserlöslichkeit	<0.1 g/100 mL at 18.5 ºC
Merck	14,2622
BRN	3919107
Stabilität	Stable, but may be moisture sensitive. Incompatible with strong oxidizing agents, strong bases, strong acids.
InChIKey	GDEBSAWXIHEMNF-UHFFFAOYSA-O
CAS Datenbank	135-20-6(CAS DataBase Reference)
NIST chemische Informationen	Cupferron(135-20-6)
IARC	2B (Vol. 127)
EPA chemische Informationen	Cupferron (135-20-6)

Sicherheit

Kennzeichnung gefährlicher	T
R-Sätze:	25-36/37/38-40-45-43-23/24/25
S-Sätze:	26-36/37-45-53
RIDADR	UN 2811 6.1/PG 3
WGK Germany	3
RTECS-Nr.	NC4725000
TSCA	Yes
HazardClass	6.1
PackingGroup	III
HS Code	29299090
Giftige Stoffe Daten	135-20-6(Hazardous Substances Data)
Toxizität	TDLo orl-rat: 123 g/kg/78W-C:CAR NCITR* NCI-CGTR-100,78

Gefahreninformationscode (GHS)

Cupferron Chemische Eigenschaften,Einsatz,Produktion Methoden

R-Sätze Betriebsanweisung:
R25:Giftig beim Verschlucken.
R36/37/38:Reizt die Augen, die Atmungsorgane und die Haut.
R40:Verdacht auf krebserzeugende Wirkung.
R45:Kann Krebs erzeugen.
R43:Sensibilisierung durch Hautkontakt möglich.
R23/24/25:Giftig beim Einatmen, Verschlucken und Berührung mit der Haut.
S-Sätze Betriebsanweisung:
S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
S36/37:Bei der Arbeit geeignete Schutzhandschuhe und Schutzkleidung tragen.
S45:Bei Unfall oder Unwohlsein sofort Arzt zuziehen (wenn möglich, dieses Etikett vorzeigen).
S53:Exposition vermeiden - vor Gebrauch besondere Anweisungen einholen.
Aussehen Eigenschaften
C6H9N3O2; N-Nitroso-N-phenylhydroxyamin Ammoniumsalz, N-Phenyl-N-nitrosohydroxylamin Ammoniumsalz. Gelber Feststoff mit schwachem Eigengeruch.
Gefahren für Mensch und Umwelt
Gesundheitsschädlich beim Verschlucken.
LD₅₀ (oral, Ratte): 199 mg/kg
Schutzmaßnahmen und Verhaltensregeln
Schutzhandschuhe als kurzzeitiger Staubschutz.
Verhalten im Gefahrfall
Einatmen von Stäuben vermeiden.
Vorsichtig trocken aufnehmen. Der Entsorgung zuführen. Nachreinigen.
Wasser.
Brennbar. Im Brandfall können nitrose Gase entstehen.
Erste Hilfe
Nach Hautkontakt: Mit reichlich Wasser abwaschen.
Nach Augenkontakt: Bei geöffnetem Lidspalt mit reichlich fliessendem Wasser (Augendusche!) mindestens 15 Minuten ausspülen. Sofort Augenarzt hinzuziehen.
Nach Einatmen: Frischluft. Arzt hinzuziehen.
Nach Verschlucken: Reichlich Wasser trinken. Erbrechen auslösen. Sofort Arzt hinzuziehen.
Nach Kleidungskontakt: Kontaminierte Kleidung entfernen.
Ersthelfer: siehe gesonderten Anschlag
Sachgerechte Entsorgung
Gelöst in z.B. Ethanol als halogenfreie, organische Lösemittelabfälle.
Beschreibung
Cupferron is a creamy-white crystalline compound. Molecular weight=156.21; Freezing/Melting point=163℃. Hazard Identification (based on NFPA-704M Rating System): Health 2, Flammability 2, Reactivity 1.Soluble in water
Chemische Eigenschaften
white to light yellow crystalline powder
Chemische Eigenschaften
Cupferron is a creamy-white crystalline compound
Verwenden
Cupferron is a reagent for determination of Ce, Cu, Fe, Sn, and Ti.
Verwenden
The reagent used to be considered as specific for iron(II) and copper(II). However, in the course of later analytical studies it turned out that cupferron forms complexes with several other metals too, even in acidic medium. It is used today primarily for the determination of copper(II), but it has proved suitable for the determination of aluminium(III), bismuth(III), iron(III), mercury(II), thorium(IV), tin(IV), titanium(III), vanadium(IV) and zirconium(IV) as well. Of these, the zirconium(IV) complex is the most stable. Cupferron precipitates zirconium(IV) quantitatively from aqueous media containing sulfuric acid.
The reagent gives a precipitate with most of the above metal ions even in strong mineral acidic medium. Only the aluminium(III) complex does not precipitate in the presence of mineral acids.
By means of cupferron many metal ions can be separated: thus, for instance, iron(III) can be separated from aluminium(III) and manganese(II) and titanium (IV), zirconium(IV) and hafnium(IV) from many other metal ions, etc. Though the reagent makes possible several separations, the precipitates are not exactly of stoichiometric composition (they almost always contain some excess of the ligand). Hence instead of being directly weighed, the precipitates are usually ignited and the metal oxide residues weighed.
Verwenden
As a reagent for separating Sn from Zn, and Cu and Fe from other metals. Ppts iron quantitatively from strongly acid solution; as a quantitative reagent for vanadates with which it gives a dark-red ppt soluble in alkali solution, and for Ti with which it forms a yellow ppt; also suitable for the colorimetric estimation of Al.
Allgemeine Beschreibung
Light yellow or cream-colored crystals or a brown crystalline solid. As a reagent in the separation of copper and iron.
Air & Water Reaktionen
Hygroscopic. Soluble in water.
Reaktivität anzeigen
Cupferron may be sensitive to prolonged exposure to air. Incompatible with strong oxidizing agents, strong acids and strong bases. Forms unstable solutions with thorium, titanium and zirconium salts.
Brandgefahr
Flash point data for Cupferron are not available; however, Cupferron is probably combustible.
Sicherheitsprofil
Confirmed carcinogen with experimental carcinogenic and tumorigenic data. Poison by intravenous route. An eye irritant. Solutions with thorium salts are unstable explosives above 15°C. Solutions with titanium or zirconium salts are unstable explosives above 40℃. When heated to decomposition it emits very toxic NH3 and NOx. See also N-NITROSO COMPOUNDS and AMINES
mögliche Exposition
Cupferron is used to separate tin from zinc, and copper and iron from other metals in the laboratory. Cupferron also finds application as a quantitative reagent for vanadates and titanium; and for the colorimetric determination of aluminum. The potential for exposure appears to be greatest for those engaged in analytical or research studies involving use of the chemical. Workers may also be exposed to the compound during manufacturing processes.
Erste Hilfe
If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure,begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR ifheart action has stopped. Transfer promptly to a medicalfacility. When this chemical has been swallowed, get medical attention. Give large quantities of water and inducevomiting. Do not make an unconscious person vomit.Medical observation is recommended for 24-48 h afterbreathing overexposure, as pulmonary edema may bedelayed. As first aid for pulmonary edema, a doctor orauthorized paramedic may consider administering a corticosteroid spray.
Carcinogenicity
Cupferron is reasonably anticipated to be a human carcinogen based on sufficient evidence of carcinogenicity from studies in experimental animals.
Lager
Color Code—Green: General storage may be used.Color Code—Blue: Health Hazard/Poison: Store in a securepoison location. Prior to working with cupferron you shouldbe trained on its proper handling and storage. A regulated,marked area should be established where this chemical ishandled, used, or stored in compliance with OSHAStandard 1910.1045. Cupferron should be stored in a refrigerator or in a cool dry place and protected from exposure tomoisture.
Versand/Shipping
UN2811 Toxic solids, organic, n.o.s., Hazard Class: 6.1; Labels: 6.1-Poisonous materials, Technical Name Required.
läuterung methode
Recrystallise it twice from EtOH after treatment with Norite and finally once with EtOH. The crystals are washed with diethyl ether and air dried, then stored in the dark over solid ammonium carbonate. A standard solution (ca 0.05M prepared in air-free H2O) is prepared daily from this material for analytical work and is essentially 100% pure. [Olsen & Elving Anal Chem 26 1747 1954.] It can also be washed with Et2O, dried and stored as stated. In a sealed, dark container it can be stored for at least 12 months without deterioration. 260nm (CHCl3). max [Marvel Org Synth Coll Vol I 177 1941, Elving & Olson J Am Chem Soc 78 4206 1956, Beilstein 16 IV 891.] Possible CARCINOGEN.
Inkompatibilitäten
Forms unstable and possibly explosive compounds with thorium salts; titanium, zirconium.

Cupferron Upstream-Materialien And Downstream Produkte

N-Nitroso-N-phenylhydroxylamin,Ammoniumsalz Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

135-20-6, Cupferron Verwandte Suche:

Send Inquriy