Butylmethacrylat

Bezeichnung:Butylmethacrylat

CAS-Nr97-88-1

Englisch Name:Butyl methacrylate

CBNumberCB3321278

SummenformelC8H14O2

Molgewicht142.2

MOL-Datei97-88-1.mol

Synonyma

Butylmethacrylat

2-Methylbutylacrylat

2-Propens?ure-2-methylbutylester

Butylmethacrylat physikalisch-chemischer Eigenschaften

Schmelzpunkt	-75 °C
Siedepunkt	162-165 °C (lit.)
Dichte	0.894 g/mL at 25 °C (lit.)
Dampfdichte	4.91 (15 °C, vs air)
Dampfdruck	2 mm Hg ( 20 °C)
Brechungsindex	n20/D 1.423(lit.)
Flammpunkt	123 °F
storage temp.	Store below +30°C.
Löslichkeit	0.36g/l
Aggregatzustand	Liquid
Farbe	Clear
Geruch (Odor)	Moderate acrylate.
Explosionsgrenze	2.00-8.00%(V)
Wasserlöslichkeit	3 g/L (20 ºC)
BRN	773960
Expositionsgrenzwerte	ACGIH: TWA 5 mg/m3 NIOSH: TWA 5 mg/m3
Stabilität	Stable (though if no stabilizers are present, it may polymerize; typically stabilized through the addition of HQME). Incompatible with strong reducing agents, strong oxidizing agents. Flammable. Water-reactive at high or low pH.
InChIKey	SOGAXMICEFXMKE-UHFFFAOYSA-N
LogP	3 at 25℃
CAS Datenbank	97-88-1(CAS DataBase Reference)
NIST chemische Informationen	Butyl methacrylate(97-88-1)
EPA chemische Informationen	Butyl methacrylate (97-88-1)

Sicherheit

Kennzeichnung gefährlicher	Xi
R-Sätze:	10-36/37/38-43
S-Sätze:	16-36/37/39-26
RIDADR	UN 2227 3/PG 3
WGK Germany	1
RTECS-Nr.	OZ3675000
Selbstentzündungstemperatur	562 °F
TSCA	Yes
HazardClass	3
PackingGroup	III
HS Code	29161490
Giftige Stoffe Daten	97-88-1(Hazardous Substances Data)
Toxizität	LD50 orally in Rabbit: > 2000 mg/kg LD50 dermal Rabbit > 2000 mg/kg

Gefahreninformationscode (GHS)

Butyl methacrylate Chemische Eigenschaften,Einsatz,Produktion Methoden

ERSCHEINUNGSBILD
FARBLOSE FLüSSIGKEIT MIT CHARAKTERISTISCHEM GERUCH.
PHYSIKALISCHE GEFAHREN
Fließen, Schütten o.ä. kann zu elektrostatischer Aufladung führen.
CHEMISCHE GEFAHREN
Kann polymerisieren beim Erhitzen, unter Einfluss von Feuchtigkeit, Oxidationsmitteln oder Licht. Feuer- und Explosionsgefahr.
ARBEITSPLATZGRENZWERTE
TLV nicht festgelegt (ACGIH 2005).
MAK: Sensibilisierung der Haut (DFG 2006).
AUFNAHMEWEGE
Aufnahme in den Körper durch Inhalation.
INHALATIONSGEFAHREN
Nur ungenügende Angaben vorhanden über die Geschwindigkeit, mit der eine gesundheitsschädliche Konzentration in der Luft beim Verdampfen bei 20°C erreicht wird.
WIRKUNGEN BEI KURZZEITEXPOSITION
WIRKUNGEN BEI KURZZEITEXPOSITION:
Die Substanz reizt die Augen, die Haut und die Atemwege.
WIRKUNGEN NACH WIEDERHOLTER ODER LANGZEITEXPOSITION
Wiederholter oder andauernder Kontakt kann zu Hautsensibilisierung führen. (S. Anm.)
LECKAGE
Ausgelaufene Flüssigkeit möglichst in abdichtbaren Behältern sammeln. Reste mit Sand oder inertem Absorptionsmittel aufnehmen und an einen sicheren Ort bringen. Persönliche Schutzausrüstung: Atemschutzfilter für organische Gase und Dämpfe.
R-Sätze Betriebsanweisung:
R10:Entzündlich.
R36/37/38:Reizt die Augen, die Atmungsorgane und die Haut.
R43:Sensibilisierung durch Hautkontakt möglich.
S-Sätze Betriebsanweisung:
S16:Von Zündquellen fernhalten - Nicht rauchen.
S36/37/39:Bei der Arbeit geeignete Schutzkleidung,Schutzhandschuhe und Schutzbrille/Gesichtsschutz tragen.
Beschreibung
Butyl methacrylate (BMA) is the organic compound with the formula C4H9O2CC(CH3)=CH2. A colorless liquid, it is a common monomer for the preparation of methacrylate polymers. It is typically polymerized under free-radical conditions.
Butyl methacrylate is a versatile, plasticizing methacrylate monomer that acts as an important building block in many copolymer compositions. Serving as a base for acrylic resins, BMA provides exceptional weather resistance, high gloss, color retention, and durability. BMA contributes more intermediate glass transition and hardness values, with a glass transition temperature (Tg) of 20 °C.
Chemische Eigenschaften
clear colourless liquid with an ester-like odour
Chemische Eigenschaften
Butyl methacrylate is a flammable, colorless liquid with a mild odor.
Verwenden
Monomer for resins, solvent coatings, adhe- sives, oil additives; emulsions for textiles, leather, and paper finishing.
Verwenden
manufacture of methacrylic resins, solvent coatings, adhesives, oil additives; emulsions for textiles, leather and paper finishing; cross-linking methacrylic monomer for use in dental composite materials, artificial nails, etc.
Verwenden
n-Butyl methacrylate is used as a monomer for resins, solvent coatings, adhesives, oil additives, emulsions for textiles, leather, and paper finishing and in the manufacture of contact lenses . It is also used in dental resins, oil dispersible pesticides, and acrylic surface coatings and as copolymers, for example, in paraffin embedding media .
Vorbereitung Methode
n-Butyl methacrylate is produced by the reaction of methacrylic acid or methyl methacrylate with butanol .
Application
Butyl methacrylate (n-Butyl Methacrylate, NBMA) can be used in the production of organic glass, synthetic resins, rubber and varnish, can also be used for textile finishing, can also be used in adhesives and as a polymer plasticizer for harder resins.
Definition
ChEBI: Butylmethacrylate is an enoate ester.
benefits
Butyl methacrylate has the characteristics of hydrophobicity, adhesion, water resistance, low temperature performance, toughness and weather resistance.
Allgemeine Beschreibung
A clear colorless liquid. Flash point 130°F. Less dense (7.5 lb / gal) than water and insoluble in water. Hence floats on water. Vapors heavier than air. Used to make resins adhesives, and oil additives.
Air & Water Reaktionen
Flammable. Sensitive to moisture. Insoluble in water.
Reaktivität anzeigen
Butyl methacrylate reacts exothermically with acids. Reacts with oxidizing agents. Strong oxidizing acids may cause a reaction that is sufficiently exothermic to ignite the reaction products. Heat is generated with caustic solutions. Generates flammable hydrogen with alkali metals and hydrides. Polymerizes easily .
Hazard
Toxic by ingestion. Moderate fire risk.
Health Hazard
Inhalation may cause nausea because of offensive odor. Contact with liquid causes irritation of eyes and mild irritation of skin. Ingestion causes irritation of mouth and stomach.
Brandgefahr
Behavior in Fire: Containers may explode due to polymerization.
Chemische Reaktivität
Reactivity with Water No reaction; Reactivity with Common Materials: No reactions; Stability During Transport: Stable; Neutralizing Agents for Acids and Caustics: Not pertinent; Polymerization: May occur upon exposure to heat; Inhibitor of Polymerization: 9-15 ppm monomethyl ether of hydroquinone; 90-120 ppm hydroquinone.
Sicherheitsprofil
Moderately toxic by intraperitoneal route. Mddly toxic by ingestion, inhalation, and skin contact. An experimental teratogen. Experimental reproductive effects. A skin irritant. Flammable liquid when exposed to heat or flame. Explosive in the form of vapor when exposed to heat or flame. Violent polymerization can be caused by heat, moisture, oxidizers. To fight fire, use foam, dry chemical, CO2. When heated to decomposition it emits acrid smoke and irritating fumes.
mögliche Exposition
Forms an explosive mixture with air. Unless inhibitor is maintained at the proper level, oxidizers, heat, ultraviolet light, contamination, or moisture may cause polymerization. May accumulate static electrical charges and cause ignition of its vapors.
Erste Hilfe
If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seekmedical attention immediately. If this chemical contactsthe skin, remove contaminated clothing and wash immediately with soap and water. Seek medical attention immediately. If this chemical has been inhaled, remove fromexposure, begin rescue breathing (using universal precautions, including resuscitation mask) if breathing hasstopped and CPR if heart action has stopped. Transferpromptly to a medical facility. When this chemical hasbeen swallowed, get medical attention. Give large quantities of water and induce vomiting. Do not make an unconscious person vomit. Medical observation is recommendedfor 2448 h after breathing overexposure, as pulmonaryedema may be delayed. As first aid for pulmonary edema,a doctor or authorized paramedic may consider administering a corticosteroid spray
Lager
Color Code—Red: Flammability Hazard: Store ina flammable liquid storage area or approved cabinet awayfrom ignition sources and corrosive and reactive materials.Protect against physical damage. Before entering confinedspace where this chemical may be present, check to makesure that an explosive concentration does not exist. Outsideor detached storage is preferred. Prior to working with butylmethacrylate you should be trained on its proper handlingand storage. Store in tightly closed containers in a cool,well-ventilated area away from incompatible materialslisted above and from light and heat. Butyl methacrylateshould be kept refrigerated and inhibited with 10-ppmhydroquinone monomethylether. Metal containers involvingthe transfer of this chemical should be grounded andbonded. Drums must be equipped with self-closing valves,pressure vacuum bungs, and flame arresters. Use only nonsparking tools and equipment, especially when opening andclosing containers of this chemical. Sources of ignition,such as smoking and open flames, are prohibited where thischemical is used, handled, or stored in a manner that couldcreate a potential fire or explosion hazard.
Versand/Shipping
UN2227 Butyl methacrylate, stabilized, Hazard Class: 3; Labels: 3—Flammable liquid.
läuterung methode
Purify as for butyl acrylate. [Beilstein 2 IV 1525.]
Inkompatibilitäten
Forms an explosive mixture with air. Unless inhibitor is maintained at the proper level, oxidizers, heat, ultraviolet light, contamination, or moisture may cause polymerization. May accumulate static electrical charges and cause ignition of its vapors
Waste disposal
Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. All federal, state, and local environmental regulations must be observed.

Butyl methacrylate Upstream-Materialien And Downstream Produkte

Butylmethacrylat Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

97-88-1, Butyl methacrylate Verwandte Suche:

Send Inquriy