Dimethyl cyclopentane-1,3-dicarboxylate

Gefahreninformationscode (GHS)

• Bildanzeige (GHS)

  

• Alarmwort

  Warnung

• Gefahrenhinweise

  H302：Gesundheitsschädlich bei Verschlucken.

  H315：Verursacht Hautreizungen.

  H319：Verursacht schwere Augenreizung.

  H335：Kann die Atemwege reizen.

• Sicherheit

  P261：Einatmen von Staub vermeiden.

  P280：Schutzhandschuhe/Schutzkleidung/Augenschutz tragen.

  P301+P312：BEI VERSCHLUCKEN: Bei Unwohlsein GIFTINFORMATIONSZENTRUM/Arzt/... (geeignete Stelle für medizinische Notfallversorgung vom Hersteller/Lieferanten anzugeben) anrufen.

  P302+P352：BEI BERÜHRUNG MIT DER HAUT: Mit viel Wasser/... (Hersteller kann, falls zweckmäßig, ein Reinigungsmittel angeben oder, wenn Wasser eindeutig ungeeignet ist, ein alternatives Mittel empfehlen) waschen.

  P305+P351+P338：BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen.

Dimethyl cyclopentane-1,3-dicarboxylate Chemische Eigenschaften,Einsatz,Produktion Methoden

• Verwenden

  Dimethyl cyclopentane-1,3-dicarboxylate (cas# 2435-36-1) is a useful research chemical, It can be used as organic synthesis intermediate and pharmaceutical intermediate, mainly used in laboratory research and development process and chemical production process.

• Synthese

  A 5-L, 3-neck, roundbottom flask was equipped with a mechanical stirrer, a J-KEM temperature controller, and a reflux condenser. The flask was charged with cyclopentane-l,3-dicarboxylic acid(357 g, 2.262 mol) and methanol (1.75 L). The solution was cooled to 7 °C using anice/water bath. Concentrated sulfuric acid (70 mL) was added dropwise over 30 minresulting in an exotherm up to 12 °C. The reaction mixture was heated to reflux andstirred for 16 h when TLC analysis (10 percent methanol/ethyl acetate) indicated that thereaction was complete. The reaction mixture was concentrated, redissolved in methyl- 179 -ATI-2514175vl tert-butyl ether, and washed with saturated aqueous sodium bicarbonate (2 x 150 mL) and brine (2 x 150 mL). The organic layer was dried over sodium sulfate, filtered, and concentrated. The resulting clear oil was dissolved in hexane (2 L) and treated with a 2 N aqueous sodium hydroxide solution (950 mL) until the pH ~ 10. The layers were separated and the aqueous layer was extracted with hexane (4 x 1 L). The organic layers were combined, dried over sodium sulfate, filtered, and concentrated to provide 360 g (100percent) of dimethyl cyclopentane-l,3-dicarboxylate as a clear oil.

Dimethyl cyclopentane-1,3-dicarboxylate Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

Global(94)Suppliers

2435-36-1, Dimethyl cyclopentane-1,3-dicarboxylate Verwandte Suche: