ammonium hydrogensulphide Struktur

Ammoniumhydrogensulfid

Bezeichnung:Ammoniumhydrogensulfid

CAS-Nr12124-99-1

Englisch Name:ammonium hydrogensulphide

CBNumberCB1910243

SummenformelH5NS

Molgewicht51.11

MOL-Datei12124-99-1.mol

Synonyma

Ammoniumhydrogensulfid

Ammoniumhydrosulfid

Ammoniumsulfhydrat

Ammoniumhydrogensulfid physikalisch-chemischer Eigenschaften

Schmelzpunkt	118°C
Siedepunkt	33.33°C (estimate)
Dichte	1.17
FEMA	2053 \| AMMONIUM SULFIDE
Löslichkeit	slightly soluble in acetone; insoluble in benzene, ethyl ether
Aggregatzustand	white tetragonal or orthorhombic crystals
Farbe	white tetragonal or orthorhombic crystals, crystalline
Geruch (Odor)	ammoniacal
Wasserlöslichkeit	128.1g/100g H2O (0°C), decomposes in hot H2O [CIC73]; insoluble ether, benzene [KIR78]
CAS Datenbank	12124-99-1
EPA chemische Informationen	Ammonium sulfide ((NH4)(SH)) (12124-99-1)

Sicherheit

RIDADR	2923
HazardClass	8
PackingGroup	II

Gefahreninformationscode (GHS)

ammonium hydrogensulphide Chemische Eigenschaften,Einsatz,Produktion Methoden

ERSCHEINUNGSBILD
HYGROSKOPISCHE, WEISSE BIS GELBE KRISTALLE MIT CHARAKTERISTISCHEM GERUCH.
CHEMISCHE GEFAHREN
Beim Verbrennen Bildung von Ammoniakrauchen, Stickstoffoxiden und Schwefeloxiden. Bei Raumtemperatur Zersetzung unter Bildung giftiger und ätzender Gase mit Ammoniakund Schwefelwasserstoff. Reagiert mit Säuren unter Bildung von Schwefelwasserstoffund Schwefeloxiden. Reagiert sehr heftig mit Oxidationsmitteln.
ARBEITSPLATZGRENZWERTE
TLV nicht festgelegt (ACGIH 2005).
MAK nicht festgelegt (DFG 2005).
AUFNAHMEWEGE
Aufnahme in den Körper über die Haut, durch Inhalation und durch Verschlucken.
INHALATIONSGEFAHREN
Beim Verdampfen bei 20°C kann sehr schnell eine gesundheitsschädliche Kontamination der Luft eintreten.
WIRKUNGEN BEI KURZZEITEXPOSITION
WIRKUNGEN BEI KURZZEITEXPOSITION:
Die Substanz reizt stark die Augen, die Haut und die Atemwege.
LECKAGE
Gefahrenbereich verlassen! Fachmann zu Rate ziehen! Belüftung. Zündquellen entfernen. Verschüttetes Material in luftdichten Behältern sammeln. Chemikalienschutzanzug mit umgebungsluftunabhängigem Atemschutzgerät.
Chemische Eigenschaften
Ammonium sulfide is a yellow crystalline (sugar or sand-like) material, commonly found in liquid solution, which is flammable. Solution has an odor of rotten eggs.
Physikalische Eigenschaften
White tetragonal or orthorhombic crystal; density 1.17g/cm³; refractive index 1.74; unstable, sublimes readily at ordinary temperatures; vapor pressure 748 torr at 32°C; highly soluble in water, alcohol, liquid ammonia and liquid hydrogen sulfide; insoluble in benzene, hexane and ether.
Verwenden
In lubricants.
Definition
The true sulfide is sta- ble only in the absence of moisture and below 0C. The ammonium sulfide of commerce is largely ammonium bisulfide or hydrosulfide, NH 4 HS.
synthetische
NH4HS is prepared by the reaction of an equimolar amount of ammonia and hydrogen sulfide:
2NH₂HS + ₂S → (NH₄)₂S₃ + H₂S.
Allgemeine Beschreibung
Clear, yellowish liquid. Kept basic with NaOH, as acid will release hydrogen sulfide gas. Technical grade is 40-44%. Used in photography, textiles, synthetic flavors, coloring brasses, bronzes, and iron control.
Air & Water Reaktionen
Water soluble, with release of hydrogen sulfide, especially when acidified.
Reaktivität anzeigen
ammonium hydrogensulphide is a reducing agent. Reacts with oxidizing agents, including inorganic oxoacids, organic peroxides and epoxides. Reacts vigorously with acids to release hydrogen sulfide gas. Evolves poisonous ammonia on contact with strong bases.
Hazard
Strong irritant to skin and mucous mem- branes.
Health Hazard
May cause toxic effects if inhaled or ingested/swallowed. Contact with substance may cause severe burns to skin and eyes. Fire will produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or suffocation. Runoff from fire control or dilution water may cause pollution.
Brandgefahr
Flammable/combustible material. May be ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water.
Sicherheitsprofil
Poison by ingestion, subcutaneous, and intravenous routes. Moderately toxic by skin contact. Pyroforic in air. See also SULFIDES. When heated to decomposition it emits very toxic fumes of SOx, NOx, and NH3. Incompatible with zinc.
mögliche Exposition
It is used in photographic developers, synthetic flavors, coloring metals (i.e., to apply patina to bronze); and to make textiles.
Versand/Shipping
UN2923 Corrosive solids, toxic, n.o.s., Hazard class: 8; Labels: 8-Corrosive material, 6.1-Poisonous material, Technical Name Required. UN2683 Ammonium sulfide solution, Hazard class: 8; Labels: 8-Corrosive material, 6.1-Poisonous materials, 3-Flammable liquid
Inkompatibilitäten
Vapor form explosive mixture with air Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, epoxides. Evolves poisonous ammonia on contact with strong bases. Contact with acid or acid fumes releases hydrogen sulfide. Keep away from moisture.
Waste disposal
Add to a large volume of ferric chloride solution with stirring. Neutralize with soda ash. Flush to drain with water.

Ammoniumhydrogensulfid Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

12124-99-1, ammonium hydrogensulphide Verwandte Suche:

Send Inquriy