Ethylen

Gefahreninformationscode (GHS)

• Bildanzeige (GHS)

  

• Alarmwort

  Achtung

• Gefahrenhinweise

  H220：Extrem entzündbares Gas.

  H280：Enthält Gas unter Druck; kann bei Erwärmung explodieren.

  H336：Kann Schläfrigkeit und Benommenheit verursachen.

• Sicherheit

  P261：Einatmen von Staub vermeiden.

  P271：Nur im Freien oder in gut belüfteten Räumen verwenden.

  P403+P233：An einem gut belüfteten Ort aufbewahren. Behälter dicht verschlossen halten.

  P405：Unter Verschluss aufbewahren.

  P410+P403：Vor Sonnenbestrahlung schützen. An einem gut belüfteten Ort aufbewahren.

Ethylene Chemische Eigenschaften,Einsatz,Produktion Methoden

• ERSCHEINUNGSBILD

  FARBLOSES KOMPRIMIERTES GAS MIT CHARAKTERISTISCHEM GERUCH.

• PHYSIKALISCHE GEFAHREN

  Das Gas ist leichter als Luft. Fließen, Schütten o.ä. kann zu elektrostatischer Aufladung führen.

• CHEMISCHE GEFAHREN

  Kann polymerisieren unter Bildung aromatischer Verbindungen unter Einfluss von Temperaturen über 600°C. Reagiert mit starken Oxidationsmitteln unter Feuer- und Explosionsgefahr.

• ARBEITSPLATZGRENZWERTE

  TLV: 200 ppm (als TWA); Krebskategorie A4 (nicht klassifizierbar als krebserzeugend für den Menschen); (ACGIH 2005).
  MAK: Krebserzeugend Kategorie 3B; (DFG 2005).
  

• AUFNAHMEWEGE

  Aufnahme in den Körper durch Inhalation.

• INHALATIONSGEFAHREN

  Beim Entweichen aus dem Behälter kann das Gas die Luft verdrängen. Erstickungsgefahr in geschlossenen Räumen.

• WIRKUNGEN BEI KURZZEITEXPOSITION

  WIRKUNGEN BEI KURZZEITEXPOSITION:
  Exposition kann Bewusstseinstrübung verursachen.

• LECKAGE

  Gefahrenbereich verlassen! Belüftung. Zündquellen entfernen und Gaszufuhr unterbrechen, wenn möglich. Persönliche Schutzausrüstung: Chemikalienschutzanzug mit umgebungsluftunabhängigem Atemschutzgerät.

• R-Sätze Betriebsanweisung:

  R12:Hochentzündlich.
  R67:Dämpfe können Schläfrigkeit und Benommenheit verursachen.

• S-Sätze Betriebsanweisung:

  S9:Behälter an einem gut gelüfteten Ort aufbewahren.
  S16:Von Zündquellen fernhalten - Nicht rauchen.
  S33:Maßnahmen gegen elektrostatische Aufladungen treffen.
  S46:Bei Verschlucken sofort ärztlichen Rat einholen und Verpackung oder Etikett vorzeigen.

• Beschreibung

  Ethylene is a colorless, odorless gas that is the simplest alkene hydrocarbon. It is a natural plant hormone and is produced synthetically from natural gas and petroleum. The double bond in ethylene makes this compound highly reactive, and the volume of ethylene used in the chemical industry is greater than any other organic compound.

• Chemische Eigenschaften

  Ethylene, an alkene is a colorless gas (at room temperature). Sweet odor. Minimum detectable odor 5 260 ppm.

• Chemische Eigenschaften

  colourless gas

• Verwenden

  Ethylene is highly reactive and is one of the most important compounds for the chemical industry. The highest use of ethylene is in polymerization reactions. Polyethylene polymers are linear, but they contain side branchings of methyl groups. Among these are several groups defi ned by their density produced under different pressure regimens.
  The second highest use of ethylene involves oxidation to ethylene oxide and its derivative ethylene glycol (HO-CH₂-CH₂-OH). Ethylene glycol is used mainly as antifreeze and in the production of polyesters. Other important compounds produced through oxidation of ethylene are acetaldehyde (H₃C-CH = O) and vinyl acetate (CH₂ = CH-O-CO-CH₂). Ethylene may also be halogenated to produce a number of other compounds.

• Verwenden

  Ethylene occurs in petroleum gases, in illuminatinggas, and in ripening fruits. It is made by dehydrating alcohol. It is used in oxyethyleneflame for welding and cutting metals; inthe manufacture of polyethylene, polystyrene,and other plastics; in making ethylene oxide;and as an inhalation anesthetic.

• Verwenden

  Oxyethylene welding and cutting metals; manufacture of alcohol, mustard gas, and many other organics. manufacture of ethylene oxide (for plastics), "Polythene", polystyrene and other plastics. Plant growth regulator; used commercially to accelerate the ripening of various fruits.

• Definition

  ethylene: A colourlessflammable gaseous hydrocarbon,C₂H₄; m.p. –169°C; b.p. –103.7°C. It isthe first member of the alkene seriesof hydrocarbons. It is made bycracking hydrocarbons from petroleumand is now a major raw materialfor making other organicchemicals (e.g. ethanal, ethanol,ethane-1,2-diol). It can be polymerizedto polyethene. It occurs naturallyin plants, in which it acts as agrowth substance promoting theripening of fruits.

• Vorbereitung Methode

  Ethylene is primarily obtained from the ethane and propane components of natural gas andfrom the naphtha, kerosene, and gas oil components of crude oil. It can also be synthesizedthrough the dehydration of ethanol (C₂H₅OH). The production of ethylene from hydrocarbonfeedstocks involves mixing with steam and then subjecting the hydrocarbons to thermalor catalytic cracking. Cracking is a process in which organic molecules are broken down intosmaller molecules. Thermal cracking involves the use of heat and pressure. Catalytic crackinguses various catalysts to reduce the amount of heat and pressure required in the process.Th ermal cracking of hydrocarbons to ethylene occurs between approximately 650°C and800°C (1200°F and 1500°F). After hydrocarbons are cracked, a mixture containing ethyleneand other gases such as methane, ethane, and propane is obtained. Ethylene is separated fromthese through physical processes such as fractional distillation, refrigeration, absorption, oradsorption.

• Reaktionen

  Ethylene reacts: (1) with the halogens to form substitution halides; (2) with hypochlorous and hypobromous acid to form ethylene chlorohydrin or ethylene bromohydrin, respectively; (3) with hydrogen iodide or bromide (not chloride) to form ethyl iodide or ethyl bromide; (4) with hydrogen, in the presence of a catalyst, e.g., finely divided nickel at 150 °C, to form ethane; (5) with concentrated sulfuric acid at 160 °C to form ethyl hydrogen sulfate; and (6) with potassium permanganate to form ethylene glycol, although glycol is preferably made from ethylene dichloride or chlorohydrin.

• Allgemeine Beschreibung

  A colorless gas with a sweet odor and taste. ETHYLENE is lighter than air. ETHYLENE is easily ignited and a flame can easily flash back to the source of the leak. Under prolonged exposure to fire or heat the containers may rupture violently and rocket. Can cause explosion.

• Air & Water Reaktionen

  Highly flammable.

• Reaktivität anzeigen

  Peroxidizable monomer may initiate exothermic polymerization of the bulk material [Bretherick 1979. p. 160]. ETHYLENE in the presence of aluminum chloride may undergo a violent reaction [J. Inst. Pet. 33:254. 1947]. Ozone and ETHYLENE react explosively [Berichte 38:3837]. ETHYLENE can polymerize at low pressure if catalyzed by titanium halides. (Sundaram, K. M, M. M. Shreehan, E. F. Olszewski. thylene. Kirk-Othmer Encyclopedia of Chemical Technology. John Wiley & Sons, Inc. 2001.)

• Hazard

  Highly flammable, dangerous fire and explosion risk; explosive limits in air 3–36% by volume. Simple asphyxiant; questionable carcinogen.

• Health Hazard

  Exposure to ethylene atmosphere can causeasphyxiation. At high concentrations it is anarcotic and can cause unconsciousness.

• Health Hazard

  Moderate concentration in air causes drowsiness, dizziness, and unconsciousness. Overexposure causes headache, drowsiness, muscular weakness.

• Brandgefahr

  Flammable gas; burns with a luminous flame; autoignition temperature 490°C (914°F) (NFPA 1997), 543°C (1009°F) (Merck 1996); fire-extinguishing measure: shut off the flow of gas; use a water spray to keep fire-exposed containers cool.
  Ethylene forms explosive mixtures in air; the LEL and UEL values are 2.7% and 36% by volume of air, respectively. Its reaction with fluorine is explosively violent (△H=- 112 kcal/mol), and violent with chlorine (△H=- 36 kcal/mol). In the presence of sunlight or UV light, an ethylene– chlorine mixture will explode spontaneously. The reaction is explosive at room temperature over the oxides of mercury or silver (Mellor 1946, Suppl. 1956). Ethylene reacts vigorously with oxidizing substances. It reacts with ozone to form ethylene ozonide, H2C(O3)CH2, which is unstable and explodes on mechanical shock. Acidcatalyzed addition of hydrogen peroxide may produce ethyl hydroperoxide, which is unstable and explodes on heat or shock:.

• Industrielle Verwendung

  Ethylene, also called ethane, is a colorless,inflammable gas, CH₂:CH₂, produced in thecracking of petroleum. Ethylene liquefies at–68.2°C. Ethylene is the largest-volume organicchemical produced today, and is the basic buildingblock of the petrochemical industry. Polymerizationof ethylene is its largest use. Whenethylene is reacted in the presence of transitionmetal catalysts, such as Mo₂O₅ or Cr₂O₃, at highpressures, it forms low-density polyethylene(LDPE); at lower pressures, high-density polyethylene(HDPE) is produced. Recently, lowpressures have been employed for making a newvariant, linear low-density polyethylene(LLDPE). Ethylene is now used to produce ethylalcohol, acrylic acid, and styrene, and it is thebasis for many types of reactive chemicals.
  Trichloroethylene is a colorless liquid ofpleasant odor of the composition CHCl:CCl₂,also known as westrosol. Its boiling point is87°C and its specific gravity 1.471. It is insolublein water and is unattacked by dilute acidsand alkalis. It is non flammable and is less toxicthan tetrachlorethane. Trichloroethylene is apowerful solvent for fats, waxes, resins, rubber,and other organic substances, and is employedfor the extraction of oils and fats, for cleaningfabrics, and for degreasing metals preparatoryto plating. The freezing point is –88°C, and itis also used as a refrigerant. It is also used insoaps employed in the textile industry fordegreasing.

• Materials Uses

  Installations must be designed to withstand the pressures involved and must comply with all applicable regulations. Because it is noncorrosive, any common commercially available metals may be used with ethylene.

• Sicherheitsprofil

  Suspected carcinogen. A simple asphyxiant. High concentrations cause anesthesia. A common air contaminant. It is phytotoxic. A very dangerous fire hazard when exposed to heat or flame. Moderate explosion hazard when exposed to flame. A flammable gas. To figh fire, stop flow of gas, use Co2, dry chemical, or fine water spray. Mixtures with aluminum chloride explode in the presence of nickel catalysts, methyl chloride, or nitromethane. Explosive reaction with bromotrichloromethane (at 120℃/51 bar), carbon tetrachloride (25-100°C/30 bar). Explosive reaction with chlorine catalyzed by sunlight or UV light or in the presence of mercury(I) oxide, mercury(Ⅱ) oxide, or silver oxide. Mixtures with chlorotrifluoroethylene polymerize explosively when exposed to 50 kV gamma rays at 308 krad/hr. Has been involved in industrial accidents. Violent polymerization is catalyzed by copper above 4OO0C/54 bar. Incompatible with AlCl3, (CC4 + benzoyl peroxide), (bromotrichloromethane + NCh), 03, CCl4, Cl2, NOx, tetrafluoroethylene trifluorohypofluorite. When heated to decomposition it emits acrid smoke and irritating fumes

• mögliche Exposition

  Ethylene is used in production of fabricated plastics, antifreeze; making fibers; to manufacture ethylene oxide, polyethylene for plastics, alcohol, mustard gas and other organics. It is used to accelerate ripening of fruit; as an anesthetic; and for oxyethylene welding and cutting of metals

• Physiological effects

  When used for anesthesia, ethylene is a nontoxic gas found pleasant and nonirritating by patients. Prolonged inhalation of substantial concentrations results in unconsciousness; light and moderate anesthesia is attained, and deep anesthesia seldom occurs.
  Inhalation is fatal only if the gas acts as a simple asphyxiant, depriving the body of necessary oxygen. Because of its flammability, however, other agents have replaced ethylene for use in anesthesia in the United States and Canada.
  No deleterious action by ethylene on circulatory, respiratory, or other systems or organs has been observed. Exhalation eliminates the major portion of ethylene within minutes, although complete desaturation from body fat takes several hours. Minute traces can be detected in the blood a number of hours after anesthesia has ended.

• Erste Hilfe

  If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seekmedical attention immediately. If this chemical contactsthe skin, remove contaminated clothing and wash immediately with soap and water. Seek medical attention immediately. If this chemical has been inhaled, remove fromexposure, begin rescue breathing (using universal precautions, including resuscitation mask) if breathing hasstopped and CPR if heart action has stopped. Transferpromptly to a medical facility. When this chemical hasbeen swallowed, get medical attention. Give large quantities of water and induce vomiting. Do not make an unconscious person vomit. If frostbite has occurred, seekmedical attention immediately; do NOT rub the affectedareas or flush them with water. In order to prevent furthertissue damage, do NOT attempt to remove frozen clothingfrom frostbitten areas. If frostbite has NOT occurred,immediately and thoroughly wash contaminated skin withsoap and water.

• Carcinogenicity

  A case-control study of brain cancer among Texas petrochemical workers reported increased risks associated with exposure to multiple chemicals, including ethene. The findings were not statistically significant. The risks for ethene have not been shown to increase with increasing duration of employment. The observed increases could not be attributed to specific chemical exposures.

• Environmental Fate

  Emitted ethene is distributed primarily into the atmosphere and reacts with photochemically reactive hydroxyl radicals, ozone, and nitrate radicals, with half-lives ranging from 1.9, 6.5, and 190 days, respectively. Biodegradation in water occurs with half-lives in the range of 1–28 days, or under anaerobic conditions, 3–112 days. Bioaccumulation in aquatic organisms is not expected to occur, based on ethene’s high vapor pressure and log octanol/water partition coefficient.

• Lager

  Ethylene is stored in a cool, well-ventilatedarea isolated from oxygen, chlorine, andflammable and oxidizing substances. It isprotected against lightning, statical electricity,heat, and physical damage. It is shippedin steel pressure cylinders and tank barges.

• Versand/Shipping

  UN1962 Ethylene, Hazard Class: 2.1; Labels: 2.1-Flammable gas; UN1038 Ethylene, refrigerated liquid (cryogenic liquid), Hazard Class: 2.1; Labels: 2.1- Flammable gas. Cylinders must be transported in a secure upright position, in a well-ventilated truck. Protect cylinder and labels from physical damage. The owner of the compressed gas cylinder is the only entity allowed by federal law (49CFR) to transport and refill them. It is a violation of transportation regulations to refill compressed gas cylinders without the express written permission of the owner.

• läuterung methode

  Purify ethylene by passage through a series of towers containing molecular sieves or anhydrous CaSO4 or a cuprous ammonia solution, then conc H2SO4, followed by KOH pellets. Alternatively, it has been condensed in liquid nitrogen, with melting, freezing and pumping to remove air before passage through an activated charcoal trap, followed by a further condensation in liquid air. A sputtered sodium trap was used to remove oxygen. [Beilstein 1 IV 677.]

• Toxicity evaluation

  Ethene is classified as a simple asphyxiant. In sufficient concentrations, ethene causes central nervous system depression and unconsciousness by displacing oxygen in air, which reduces the oxygen available to support cell function.

• Inkompatibilitäten

  A highly flammable gas at room temperature. Contact with oxidizers may cause explosive polymerization and fire. May be spontaneously explosive in sunlight or ultraviolet light when mixed with chlorine. Reacts violently with mixtures of carbon tetrachloride and benzoyl peroxide; bromotrichloromethane; aluminum chloride and ozone. Incompatible with acids, halogens, nitrogen oxides; hydrogen bromide; aluminum chloride; chlorine dioxide; nitrogen dioxide. May accumulate static electrical charges, and may cause ignition of its vapors.

• Filter für giftige stoffe

  The current ITSL for ethylene (6240 μg/m3) was established on November 1, 1994 (see attached). The averaging time (AT) assigned to the ITSL at that time was 24 hours, as per the default methodology at that time (Rule 232(2)(b)).

• Waste disposal

  Return refillable compressed gas cylinders to supplier

• GRADES AVAILABLE

  Ethylene is typically available for commercial and industrial purposes in a c.P. grade (minimum purity of 99.5 mole percent), and a technical grade (minimum purity of 98.1 mole percent).

Ethylene Upstream-Materialien And Downstream Produkte

Ethylen Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

Global(115)Suppliers

74-85-1, Ethylene Verwandte Suche: