3-Buten-1-ol

Gefahreninformationscode (GHS)

• Bildanzeige (GHS)

  

• Alarmwort

  Warnung

• Gefahrenhinweise

  H226：Flüssigkeit und Dampf entzündbar.

  H315：Verursacht Hautreizungen.

  H319：Verursacht schwere Augenreizung.

  H335：Kann die Atemwege reizen.

• Sicherheit

  P210：Von Hitze, heißen Oberflächen, Funken, offenen Flammen und anderen Zündquellenarten fernhalten. Nicht rauchen.

  P233：Behälter dicht verschlossen halten.

  P240：Behälter und zu befüllende Anlage erden.

  P241：Explosionsgeschützte [elektrische/Lüftungs-/ Beleuchtungs-/...] Geräte verwenden.

  P303+P361+P353：BEI BERÜHRUNG MIT DER HAUT (oder dem Haar): Alle kontaminierten Kleidungsstücke sofort ausziehen. Haut mit Wasser abwaschen oder duschen.

  P305+P351+P338：BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen.

3-Buten-1-ol Chemische Eigenschaften,Einsatz,Produktion Methoden

• R-Sätze Betriebsanweisung:

  R10:Entzündlich.
  R36/37/38:Reizt die Augen, die Atmungsorgane und die Haut.

• S-Sätze Betriebsanweisung:

  S16:Von Zündquellen fernhalten - Nicht rauchen.
  S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
  S36:DE: Bei der Arbeit geeignete Schutzkleidung tragen.

• Chemische Eigenschaften

  liquid

• Verwenden

  Employed in a study of the Mn-catalyzed hydrohydrazination of olefins. Also used in a study of the conversion of propargylic acetates to ethers cataylzed by ferric chloride.

• Verwenden

  3-Buten-1-ol is employed in a study of the Mn-catalyzed hydrohydrazination of olefins. Also used in a study of the conversion of propargylic acetates to ethers catalyzed by ferric chloride.

• Verwenden

  3-Buten-1-ol is an aliphatic primary alcohol used as a reagent in organic synthesis.

• Definition

  ChEBI: 3-Buten-1-ol is a primary alcohol.

• Allgemeine Beschreibung

  3-Buten-1-ol is a homoallyl alcohol that can be prepared by the dehydration of 1,4-butanediol using cerium catalyst. The intramolecular hydrogen bonding of 3-buten-1-ol has been studied using FT-IR and ¹H NMR spectroscopic data. Its microwave spectrum has been recorded and analyzed. The alkylation reaction of 3-buten-1-ol using titanium-organoaluminum system has been studied. Its gas-phase enthalpy of formation has been reported to be -147.3 ± 1.8kJ mol^-1.

• Hazard

  3-Buten-1-ol is strongly irritating to the skin and eyes. it may cause respiratory irritation. it is toxic to aquatic organisms and has long lasting effects.

• Synthese

  The synthesis of 3-Buten-1-ol is as follows:After adding 24.3 g (1 mol) of magnesium turnings, 50 g of diethyl ether and 1 ml of dibromoethane in a 500 mL four-necked flask,A solution of 62.5 g of vinyl chloride (1 mol) dissolved in 200 g of diethyl ether was added dropwise to magnesium and diethyl ether, and the micro reflux was controlled, and the dropwise addition was completed, and the mixture was kept under a micro reflux for 2 hours, and the temperature was lowered to -5 °C;Then 44 g (1 mol) of ethylene oxide was dissolved in 60 g of diethyl ether. Ethylene oxide is added dropwise to the vinylmagnesium chloride solution prepared above, control the temperature -5-5 degrees, and stir at this temperature for 1 hour. Sampling gas phase analysis until the reaction is complete; pour the reaction solution into a 1000 mL beaker, Add 200mL of ice water and add ammonium chloride until the residual magnesium disappears. Control the temperature 0-10 ° C, stir for 1 hour after the addition, add salt to saturation, static layering. The organic layer was separated and washed twice with 100 ml of saturated brine, and a polymerization inhibitor was added. The product is subjected to rectification to obtain 53 g of 3-buten-1-ol, and the content is 99.2%. The yield was 73.6%.

  
  

3-Buten-1-ol Upstream-Materialien And Downstream Produkte

3-Buten-1-ol Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

Global(473)Suppliers

627-27-0, 3-Buten-1-ol Verwandte Suche: