Isonicotinonitril

Gefahreninformationscode (GHS)

• Bildanzeige (GHS)

  

• Alarmwort

  Warnung

• Sicherheit

  P261：Einatmen von Staub vermeiden.

  P264：Nach Gebrauch gründlich waschen.

  P264：Nach Gebrauch gründlich waschen.

  P280：Schutzhandschuhe/Schutzkleidung/Augenschutz tragen.

  P301+P312：BEI VERSCHLUCKEN: Bei Unwohlsein GIFTINFORMATIONSZENTRUM/Arzt/... (geeignete Stelle für medizinische Notfallversorgung vom Hersteller/Lieferanten anzugeben) anrufen.

4-Cyanopyridine Chemische Eigenschaften,Einsatz,Produktion Methoden

• R-Sätze Betriebsanweisung:

  R20/21/22:Gesundheitsschädlich beim Einatmen,Verschlucken und Berührung mit der Haut.

• S-Sätze Betriebsanweisung:

  S36/37:Bei der Arbeit geeignete Schutzhandschuhe und Schutzkleidung tragen.
  S24/25:Berührung mit den Augen und der Haut vermeiden.

• Chemische Eigenschaften

  beige solid

• Chemische Eigenschaften

  The cyanopyridines are as follows: 2-cyano-: A white to tan liquid or solid. Almond odor. Boiling point=2213℃ ; freezing/melting point=27℃ ; flash point=89℃ . 3-cyano-: a colorless liquid or gray crystal- line solid.

• Verwenden

  4-Cyanopyridine is used as an intermediate in organic synthesis and pharmaceutical substances like isonicotinylhydrazide, which is used in the treatment of tuberculosis. It is used as a precursor for the preparation of isonicotinic acid and 4-diemthylaminopyridine (DMAP). It is involved in the synthesis of 6-methyl-2-pyridin-4-yl-pyrimidin-4-ylamine by reacting with acetonitrile.

• Synthese

  4-Cyanopyridine is synthesised by the reaction of 4-methylpyridine with ammonia and air in the presence of a catalyst. The specific synthesis steps are as follows:
  4-Methylpyridine and ammonia vaporisation preheating to 180-330°C, then into the mixing tank and air mixing uniformly, into the fixed-bed reactor by the top of the fixed-bed reactor after the distribution of the catalyst-filled reactor, the control of the reaction temperature in the range of 330-450 ° C, the reaction head pressure is controlled in the range of 0.020-0.070 KPa, the reaction temperature is controlled by molten salts, the reaction gas after the end of the reaction After the reaction, the reaction gas was condensed to sub-zero fractionation to obtain the crude product of 4-cyanopyridine, and the crude product was distilled to obtain the finished product of 4-cyanopyridine. The conversion rate of 4-methylpyridine was above 99%, and the yield of 4-cyanopyridine was above 98%.
  

• mögliche Exposition

  Limits in Air NIOSH IDLH525 mg/m3 NIOSH REL: (nitriles) 2 ppm, Ceiling Concentration, not to be exceeded in any 15-minute work period.

• Versand/Shipping

  UN3276 Nitriles, liquid, toxic, n.o.s., Hazard Class: 6.1; Labels: 6.1-Poisonous materials, Technical Name Required, Potential Inhalation Hazard (Special Provision 5).

• Inkompatibilitäten

  Oxidizing agents, such as perchlorates, peroxides, and permanganates. Nitriles may polymerize in the presence of metals and some metal compounds. They are incompatible with acids; mixing nitriles with strong oxidizing acids can lead to extremely violent reactions. Nitriles are generally incompatible with other oxidizing agents such as peroxides and epoxides. The combination of bases and nitriles can produce hydrogen cyanide. Nitriles are hydrolyzed in both aqueous acid and base to give car- boxylic acids (or salts of carboxylic acids). These reactions generate heat. Peroxides convert nitriles to amides. Nitriles can react vigorously with reducing agents. Acetonitrile and propionitrile are soluble in water, but nitriles higher than propionitrile have low aqueous solubility. They are also insoluble in aqueous acids .

4-Cyanopyridine Upstream-Materialien And Downstream Produkte

Isonicotinonitril Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

Global(588)Suppliers

100-48-1, 4-Cyanopyridine Verwandte Suche: