TYLOXAPOL

Gefahreninformationscode (GHS)

• Bildanzeige (GHS)

  

• Alarmwort

  Warnung

• Gefahrenhinweise

  H315：Verursacht Hautreizungen.

  H319：Verursacht schwere Augenreizung.

  H335：Kann die Atemwege reizen.

• Sicherheit

  P261：Einatmen von Staub vermeiden.

  P264：Nach Gebrauch gründlich waschen.

  P264：Nach Gebrauch gründlich waschen.

  P271：Nur im Freien oder in gut belüfteten Räumen verwenden.

  P280：Schutzhandschuhe/Schutzkleidung/Augenschutz tragen.

  P302+P352：BEI BERÜHRUNG MIT DER HAUT: Mit viel Wasser/... (Hersteller kann, falls zweckmäßig, ein Reinigungsmittel angeben oder, wenn Wasser eindeutig ungeeignet ist, ein alternatives Mittel empfehlen) waschen.

  P305+P351+P338：BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen.

TYLOXAPOL Chemische Eigenschaften,Einsatz,Produktion Methoden

• R-Sätze Betriebsanweisung:

  R36/37/38:Reizt die Augen, die Atmungsorgane und die Haut.

• S-Sätze Betriebsanweisung:

  S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
  S36:DE: Bei der Arbeit geeignete Schutzkleidung tragen.

• Beschreibung

  Tyloxapol is a non-ionic liquid polymer of the alkylaryl polyether alcohol type. It has a wide range of uses as a surfactant (primarily for bronchopulmonary studies and drug delivery systems), an animal model inducer (used for induction of hyperlipidaemia in animals), and a reagent for biological studies (including studies of its mechanism of protection of macrophages against endotoxins and potential cytotoxicity).

• Chemische Eigenschaften

  clear to hazy yellow to amber viscous liquid

• Originator

  Solacen

• Verwenden

  Tyloxapol, is a nonionic liquid polymer of the alkyl aryl polyether alcohol type. It is used as a surfactant to aid liquefaction and removal of mucopurulent (containing mucus and pus) bronchopulmonary secretions. Tyloxapol also blocks plasma lipolytic activity.

• Verwenden

  anthelmintic, hepatotoxic

• Definition

  ChEBI: Tyloxapol is a polymeric compound resulting from the reaction of 4-(1,1,3,3-tetramethylbutyl)phenol with formaldehyde to give a chain in which 6-8 molecules are linked together by CH2 groups ortho to the phenolic hydroxy groups, which have then undergone reaction with oxirane to give polyoxyethyleneoxy moieties, Ar(OCH2CH2)xOH, where x = 8-10. A nonionic liquic polymer, it inhibits lipoprotein lipase and hence clearance of triglyceride from the plasma, so is used to induce hyperlipidaemia in test animals. Also used as a surfactant to aid liquefaction and removal of mucus- and pus-containing bronchopulmonary secretions. It has a role as an inhibitor, an excipient, a surfactant and an apoptosis inducer.

• Manufacturing Process

  Srep 1: Into a 3-necked flask equipped with thermometer, mechanical agitator, and reflux condenser was charged the following: 412 g of α,α,γ,γ- tetramethylbutylphenol, 162 g of a 37% aqueous solution of formaldehyde, and 27.6 g of water. The mixture was agitated and heated to a temperature of 90°C. At this point, 246 g of oxalic acid and 0.92 g of Twitchell's reagent dissolved in 10 g of water were added. While being agitated, the reaction mixture was refluxed for 6 hours. 200 g of water and 384 g of toluene were added, and refluxing was continued for an hour.
  Agitation was stopped and the contents of the flask were removed to a separatory funnel. The aqueous and resinous layers were separated and the solvent was removed from the resinous layer by vacuum distillation. After the removal of the solvent, heating at a reduced pressure of 1.5 to 2.5 mm and at a temperature of 245° to 250°C was continued for 4 1/2 hours. The condensate then had a viscosity of 4.0 poises when measured as a 60% solution in toluene and, on cooling, solidified to a brittle mass.
  Step 2: A mixture of 118 parts of the product of Step 1, having hydroxyl number of 260, 2 parts of solid NaH, and 100 parts of toluene was heated to 125° to 150°C in an autoclave. Ethylene oxide was added slowly over a period of 2 1/2 hours until 261 parts of ethylene oxide were absorbed. This corresponds to 11 mols of ethylene oxide per mol of phenol in the product of Step 1. The toluene was then removed by steam distillation and the water by vacuum distillation at 10°C. The product was obtained as a viscous paste having a corrected hydroxyl number of 97. It was readily soluble in water and had marked detergent properties.

• Trademarks

  Superinone (Sterling Winthrop).

• Therapeutic Function

  Bronchodilator

• Allgemeine Beschreibung

  Tyloxapol is a biocompatible surfactant

• Mechanism of action

  Tyloxapol, when injected IP, blocks plasma lipolytic activity, and thus the breakdown of triglyceride-rich lipoproteins. It has also been shown to be inhibitor of lipoprotein lipase, thus preventing triglyceride uptake.

TYLOXAPOL Upstream-Materialien And Downstream Produkte

TYLOXAPOL Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

Global(195)Suppliers

25301-02-4, TYLOXAPOL Verwandte Suche: