Strontiumsulfid

Bezeichnung:Strontiumsulfid

CAS-Nr1314-96-1

Englisch Name:Strontium sulfide

CBNumberCB0386740

SummenformelSSr

Molgewicht119.68

MOL-Datei1314-96-1.mol

Synonyma

Strontiumsulfid

Strontiumsulfid physikalisch-chemischer Eigenschaften

Schmelzpunkt

>2000 °C(lit.)

Dichte

3,7 g/cm³

Löslichkeit

slightly soluble in H2O; soluble in acid solutions

Aggregatzustand

Powder

Wichte

3.7

Farbe

Gray

Wasserlöslichkeit

Slightly soluble in water. Decomposes in acids

Crystal Structure

NaCl type

Sensitive

Hygroscopic

Merck

14,8849

crystal system

Cube

Space group

Fm3m

Lattice constant

a/nm	b/nm	c/nm	α/o	β/o	γ/o	V/nm3
0.60203	0.60203	0.60203	90	90	90	0.2182

Stabilität

Stable. Incompatible with acids.

CAS Datenbank

1314-96-1(CAS DataBase Reference)

EPA chemische Informationen

Strontium sulfide (1314-96-1)

Sicherheit

Kennzeichnung gefährlicher	C
R-Sätze:	31-34
S-Sätze:	26-36/37/39-45
RIDADR	UN 3262 8/PG 3
WGK Germany	3
TSCA	Yes
HazardClass	4.3
PackingGroup	III
HS Code	2830908500

Gefahreninformationscode (GHS)

Strontium sulfide Chemische Eigenschaften,Einsatz,Produktion Methoden

R-Sätze Betriebsanweisung:
R31:Entwickelt bei Berührung mit Säure giftige Gase.
R34:Verursacht Verätzungen.
S-Sätze Betriebsanweisung:
S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
S36/37/39:Bei der Arbeit geeignete Schutzkleidung,Schutzhandschuhe und Schutzbrille/Gesichtsschutz tragen.
S45:Bei Unfall oder Unwohlsein sofort Arzt zuziehen (wenn möglich, dieses Etikett vorzeigen).
Chemische Eigenschaften
Strontium sulfide is a grey powder giving a hydrogen sulphide-like smell in the air. It is insoluble in cold water, and decomposes in hot water and acid. In the wet air can decompose to H2S, can also be oxidised to SrSO4. heating for 3 hours to light red, and water vapour contact with the formation of SrO, SrSO4, H2 and SO2. reaction with acid to produce H2S.
Verwenden
Strontium sulfide (SrS) smells like rotten eggs. It is used as a depilatory to remove hair from skin and hides or In luminous paints.
synthetische
Strontium sulfide can be prepared by the direct reaction of the elements, calcined in an inert atmosphere, at a 1:1.05 molecular ratio:
Sr＋S＋heat→SrS
SrS can also be produced by the “carbothermic reduction” of calcium sulfate, which entails the conversion of carbon, usually as charcoal, to CO2:
SrSO4＋2C→SrS＋ 2CO2
This can react further:
3SrSO4＋SrS→4SrO＋ 4SO2
A mixture of oxide-sulfide is the result. Thus, this type of preparation cannot be used to prepare a pure SrS salt.
Vorbereitung Methode
Strontium sulfide, grayish-white solid (thermodynamic Ksp 500) reactive with water to form strontium hydrosulfide, Sr(SH)2, solution. Strontium hydrosulfide is formed (1) by reaction of strontium sulfide and H2O, (2) by saturation of strontium hydroxide solution with H2S. Strontium polysulfides are formed by boiling strontium hydrosulfide with sulfur.
Allgemeine Beschreibung
Gray powder with an odor of H2S in moist air.
Air & Water Reaktionen
Slowly releases H2S in moist air.
Reaktivität anzeigen
STRONTIUM SULFIDE reacts vigorously with acids to release hydrogen sulfide gas. May react exothermically with oxidizing agents including inorganic oxoacids, organic peroxides and epoxides, and inorganic peroxides to generate toxic gases.
Hazard
Moderate fire and explosion risk. Irritant to skin and tissues.
Health Hazard
ACUTE/CHRONIC HAZARDS: Irritant to skin and tissue. Moderate fire hazard and explosion risk.
Flammability and Explosibility
Non flammable
Sicherheitsprofil
Poison by inhalation and ingestion. Ready decomposes to yield H2S. Incompatible with lead(1V) oxide. When heated to decomposition it emits toxic fumes of SOx. See also SULFIDES and STRONTIUM COMPOUNDS.

Strontium sulfide Upstream-Materialien And Downstream Produkte

Strontiumsulfid Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

1314-96-1, Strontium sulfide Verwandte Suche:

Send Inquriy