Diethylaminomalonathydrochlorid

Gefahreninformationscode (GHS)

• Bildanzeige (GHS)

  

• Alarmwort

  Warnung

• Gefahrenhinweise

  H315：Verursacht Hautreizungen.

  H319：Verursacht schwere Augenreizung.

  H335：Kann die Atemwege reizen.

• Sicherheit

  P261：Einatmen von Staub vermeiden.

  P264：Nach Gebrauch gründlich waschen.

  P264：Nach Gebrauch gründlich waschen.

  P280：Schutzhandschuhe/Schutzkleidung/Augenschutz tragen.

  P304+P340：BEI EINATMEN: Die Person an die frische Luft bringen und für ungehinderte Atmung sorgen.

  P305+P351+P338：BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen.

  P405：Unter Verschluss aufbewahren.

Diethyl aminomalonate hydrochloride Chemische Eigenschaften,Einsatz,Produktion Methoden

• R-Sätze Betriebsanweisung:

  R36/37/38:Reizt die Augen, die Atmungsorgane und die Haut.

• S-Sätze Betriebsanweisung:

  S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
  S36:DE: Bei der Arbeit geeignete Schutzkleidung tragen.

• Chemische Eigenschaften

  white to slightly yellow crystalline powder

• Verwenden

  Diethyl aminomalonate hydrochloride is used as a pharmaceutical intermediate. Diethyl aminomalonate with formaldehyde generates an azomethine ylide which can undergo cycloadditions with 1,2-dipolarophiles to form pyrrolidines.

• Synthese

  A solution of 420.0 g of a mixture of diethyl hydroxyiminomalonate and diethyl acetoxyiminomalonate (together 2.0 mol) in 400 ml of ethyl acetate, 40.0 g of anhydrous magnesium sulfate and 12.5 g of palladium on activated charcoal (5 percent by weight of Pd) as hydrogenation catalyst were placed in a 1.5 l pressure reactor equipped with a stirrer. At 30° to 35° C., hydrogen was introduced under a pressure of 20 bar for 80 minutes until the pressure remained constant. The reactor contents were thoroughly mixed by stirring during this process. The hydrogenation mixture was cooled to 20° C. and diluted with 200 ml of ethyl acetate and the mixture of hydrous magnesium sulfate and catalyst was filtered off. The solid which had been separated off was washed three times with a total of 200 ml of ethyl acetate and the wash liquor was combined with the filtrate. Diethyl aminomalonate hydrochloride was precipitated out as a white solid by the introduction of 68 g of dry hydrogen chloride, filtered off, washed with ethyl acetate and dried under a water jet vacuum at 70° C. The yield was 359.6 g (85.1% of theory), the melting point was 165° C. and the purity according to the analytically determined chlorine content was 100%.

Diethyl aminomalonate hydrochloride Upstream-Materialien And Downstream Produkte

Diethylaminomalonathydrochlorid Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

Global(546)Suppliers

13433-00-6, Diethyl aminomalonate hydrochloride Verwandte Suche: