Chemical Properties
clear white pellets
Uses
A large quantity of this copolymer is extruded as a thin tubing which is biaxally stretched by inflating with air at moderate temperatures before slitting. This product, called Saran Wrap, has a tensile strength of 15,000 psi (103 MPa). Since it has a high degree of transparency to light and a high coefficient of static friction (0.95) it is widely used for the protection of foods in the household. It has a low permeability value for gases such as oxygen and nitrogen.
Poly(vinylidene chloride-co-acrylonitrile) is widely used as a latex coating for cellophane, polyethylene and paper. Since this copolymer is soluble in organic solvents, it is also used as a solution coating. The resistance to vapor permeability and the ease of printing on polyethylene and cellophane is increased by coating with this vinylidene chloride copolymer.
The tensile strength of both film and fiber is increased tremendously by cold drawing 400–500 per cent. Thus, tensile strengths as high as 40,000 psi (276 MPa) in the direction of draw have been obtained by cold drawing.
Definition
ChEBI: Styrene-acrylonitrile copolymer is a polymer.
Production Methods
POLYVINYLIDENE CHLORIDE.. A stereoregular, thermoplastic polymer is produced by the free-radical chain polymerization of vinylidene chloride (H2C=CCl2) using suspension or emulsion techniques. The monomer has a bp of 31.6 °C and was first synthesized in 1838 by Regnault, who dehydrochlorinated 1,1,2-trichloroethane which he obtained by the chlorination of ethylene. The copolymer product has been produced under various names, including Saran. Since this monomer readily forms an explosive peroxide, it must be kept under a nitrogen atmosphere at ?10 °C in the absence of sunlight.
The copolymers were patented by Wiley, Scott, and Seymour in the early 1940s. A typical formulation for emulsion copolymerization contains vinylidene (85 g), vinyl chloride (15 g), methylhydroxypropylcellulose (0.05 g), lauroyl peroxide (0.3 g) and water (200 g). More than 95 per cent of these monomers are converted to copolymer when this aqueous suspension is agitated in an oxygen-free atmosphere for 40 hrs at 60 °C. The glass transition temperature of the homopolymer is ?17 °C. It has a specific gravity of 1.875 and a solubility parameter of 9.8.
Solubility in organics
Butanone, chloroform, THF
Solubility in organics
Dimethyl formamide, dimethyl sulfoxide, dimethyl acetamide, 1-methyl-2-pyrrolidone
