7789-00-6

Raw materials And Preparation Products

Hazard Information

Material Safety Data Sheet(MSDS)

Questions And Answer

• Inorganic compound

  Potassium chromate, commonly known as tarapacaite, is an inorganic compound, which is yellow orthorhombic or hexagonal crystal at room temperature. The relative density is 2.732, and the melting point is 968 °C. It is toxic and can disolve in water to form alkaline chromate ion hydrolysis solution. And it is insoluble in alcohol and ether. After added acid, the yellow solution of potassium chromate will turn orange, which is the color of dichromate. There is an equilibrium between the conversion of chromate and dichromate in the solution:
  When the acid is added to the potassium chromate solution, the equilibrium will shift toward the direction of generating potassium dichromate, and when the alkali is added to the potassium dichromate solution, the equilibrium will shift to the direction of generating potassium chromate. Potassium chromate has oxidative properties, and it can react with the reducing agent in alkaline medium to form Cr(OH)4-(namely CrO¬2-). Adding different solutions respectively containing barium ion, lead ion and silver ion to the potassium chromate solution will form the corresponding insoluble chromate: barium chromate BaCrO4 (yellow), lead chromate pbCrO4 (yellow), silver chromate Ag2CrO4(Brick red). And the presence of chromate ions can be demonstrated by the characteristic color of these insoluble chromates. Potassium chromate can be used as analytical reagent, oxidant, mordant, metal rust inhibitor, and used for barium and silver trace analysis. It can also be used as raw materials of tanning and medicine industry and other chromium compounds. Chromite Fe(CrO2)2 powder can be used as raw material and calcined with potassium hydroxide, limestone (dolomite) in the air, and then extracted with potassium sulfate solution to obtain potassium chromate.
  The above information is edited by Xiao Nan of Chemicalbook.;

• Potassium chromate indicator method

  Potassium chromate indicator method, also known as Moore (Mohr), is a precipitation titration method (silver method) that uses potassium chromate (K2CrO4) as indicator and silver nitrate (AgNO3) as the standard solution. This method is mainly used for the determination of chlorine Ion (Cl-) or bromide ion (Br-). Add a small amount of K2CrO4 as indicator before stating determination, and then titrate with AgNO3 standard solution. After the start of the titration, the precipitate of white (silver chloride) or pale yellow (silver bromide) precipitates first. When Cl-or Br-precipitates quantitatively, a little excess silver nitrate solution will cause the concentration of Ag+ suddenly increasing to immediately generate brick red silver chromate (Ag2CrO4) precipitation, indicating the titration endpoint. The amount of indicator and the acidity of the solution are two major problems of this titration method. If the K2CrO4 concentration is too high, the color of the titration solution will be too deep to hinder the observation of Ag2CrO4 precipitation color in the end; if the K2CrO4 concentration is too low, an excessively considerable amount of silver nitrate solution will be needed after the quantitative precipitation of silver halide to generate silver chromate precipitation to instruct the titration end point, which will results the titration error increasing. When the 0.1mol/l AgNO3 solution is used to titrate the 0.1mol/l halide, if the concentration of K2CrO4 is 5× 10-3mol/l, the end point error is only +0.06%, which can be thought that the accuracy of the analysis result is not affected. K2CrO4 indicator method can not be carried out in acidic or alkaline solution, because K2CrO4 will be converted to potassium dichromate (K2Cr2O7) at a small pH value, and Ag+ will precipitate in the form of silver oxide (Ag2O) when the pH is too high. Commonly, the suitable acidity range is pH = 6.5~ 10.5, but when there are ammonium salts in solution, the solution acidity pH = 6.5~7.2 is appropriate.
  The potassium chromate indicator method can only be used for the direct titration of Cl-or Br-ions, and the titration result is their total when coexisting. This method is not suitable for the determination of iodide ion (I-) or thiocyanate ion (SCN-), because they are too easily absorbed by sedimentation and the end point is unclear. This method is also not suitable for titrating Ag+ with Cl-, but Ag+ can be determined using the back titration, namely add an excessive amount of NaCl standard solution in the test solution, and then use AgNO3 standard solution to titrate excess Cl-ions. In the solution, all the cations that can form precipitates with CrO2-4 or the anions that can precipitate with Ag+ will interfere with the determination. Potassium chromate indicator method is mainly used for the determination of the Cl-ions in very dilute solution, such as the determination of Cl-in drinking water and industrial products impurities.;

• Potassium dichromate

  Potassium dichromate, also known as red alum potassium, is orange-red triclinic crystal or needle-like crystal. The density is 2.676 g/cm3. The melting temperature is 398 °C. It is soluble in water and insoluble in ethanol. It has strong oxidizing property and decomposes at 1300 °C.
  In production, potassium dichromate is always used to introduce chromium to make the enamel colored when melting. It is the coloring agent of colored titanium milk yellow glaze and titanium yellow glaze, and the used dosage is generally 0.06%~0.12%. Potassium dichromate and copper oxide can also be mix-used to obtain green, bamboo green, fruit green and other color glaze. However, these colored glazes are generally less glossy due to the influence of chromate.
  The color glaze obtained from chromium oxide or potassium (sodium) dichromate often is yellow-green due to the valence change of chromium ions in the melting process. Potassium dichromate is also commonly used to make various green pigments and pink pigments.
  Potassium dichromate should meet the required targets: potassium dichromate content ≥ 99%, chloride (Cl) content ≤ 0.08%, water insoluble ≤ 0.05%.
  The above information is compiled by Yaoyao of Chemicalbook.;

• Solubility in water (g/100ml)

  Dissolved grams per 100 ml of water at different temperatures (°C):
  60 g/10 °C; 63.7 g/20 °C; 66.7 g/30 °C; 67.8 g/40 °C
  70.1 g/60 °C; 74.5 g/90 °C;

• Toxicity

  See sodium chromate;

• Chemical properties

  Lemon yellow orthorhombic crystal; Soluble in water; insoluble in alcohol;

• Application

  Used as analytical reagent, oxidant, mordant and metal rust inhibitor;used for the manufacture of chromate,used as oxidant and mordant of printing and dyeing. Used for ink, paint, enamel, metal corrosion and so on,mainly used in the manufacture of chemical reagents and pigments.;

• Preparation

  Neutralization method: Dissolve potassium dichromate in the mother liquor and water, and then add the mixture to the reactor. Next add potassium hydroxide under stirring to carry out neutralization reaction. The produced potassium chromate is weakly alkaline, and then evaporated for concentration, cooled for crystallization, separated and dried to obtain the finished potassium chromate products.
  K2Cr2O7 + 2KOH → 2K2CrO4 + H2O
  The separated mother liquor will be returned to the dissolving step for dissolving potassium dichromate.;

Spectrum Detail

Well-known Reagent Company Product Information

Supplier

Related Products