ChemicalBook CAS DataBase List 7440-32-6

7440-32-6

Name	TITANIUM
CAS	7440-32-6
EINECS(EC#)	241-036-9
Molecular Formula	Ti
MDL Number	MFCD00011264
Molecular Weight	47.87
MOL File	7440-32-6.mol

Chemical Properties

Definition	Metallic element of atomic number 22, group IVB of the periodic table, aw 47.90, valences of 2, 3, 4; five isotopes
Appearance	Titanium is a silvery metal or dry, dark-gray amorphous, lustrous powder.
Melting point	1660 °C (lit.)
Boiling point	3287 °C (lit.)
bulk density	1260kg/m3
density	4.5 g/mL at 25 °C(lit.)
Fp	0°C
storage temp.	no restrictions.
form	wire
color	Silver-gray
Specific Gravity	4.5
Flame Color	Silver-white
PH	5-8 (50g/L in H2O, suspension)
Stability:	Stable. Dust is thought to be spontaneously flammable, and may form an explosive mixture with air. Flammable solid. Incompatible with mineral acids, halogens, carbon dioxide, strong oxidizing agents.
Resistivity	42.0 μΩ-cm, 20°C
Electrical Conductivity	2.5× 10⁶S/m
Water Solubility	Insoluble in water.
Specific Heat Capacity	Cp(crystal):0.524337J/(g·K);Cp(gas):0.509714J/(g·K),at 25℃
Thermal Conductivity	22 W/(m·K)
Merck	13,9547
Exposure limits	ACGIH: TWA 2.5 mg/m3 NIOSH: IDLH 250 mg/m3
Cosmetics Ingredients Functions	ABSORBENT LIGHT STABILIZER
InChI	1S/Ti
InChIKey	RTAQQCXQSZGOHL-UHFFFAOYSA-N
SMILES	[Ti]
Hardness, Brinell	70, electrolytic Ti
Hardness, Vickers	60
Modulus of Elasticity	116 GPa
Poissons Ratio	0.34
Shear Modulus	43.0 GPa, calculated
CAS DataBase Reference	7440-32-6(CAS DataBase Reference)
EPA Substance Registry System	Titanium (7440-32-6)

Safety Data

Symbol(GHS)	GHS02
Signal word	Danger
Hazard statements	H228
Precautionary statements	P210-P240-P241-P280-P370+P378
Hazard Codes	F,Xi
Risk Statements	R20/21/22:Harmful by inhalation, in contact with skin and if swallowed . R11:Highly Flammable. R17:Spontaneously flammable in air. R36/38:Irritating to eyes and skin . less more
Safety Statements	S16:Keep away from sources of ignition-No smoking . S36/37/39:Wear suitable protective clothing, gloves and eye/face protection . S33:Take precautionary measures against static discharges . S27:Take off immediately all contaminated clothing . S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice . S6:Keep under ... (inert gas to be specified by the manufacturer) . less more
RIDADR	UN 2878 4.1/PG 3
WGK Germany	3
RTECS	XR1700000
F	10
Autoignition Temperature	860 °F
TSCA	Yes
REACH Registrations	Active
HazardClass	4.2
PackingGroup	III
HS Code	81089020
Storage Class	13 - Non Combustible Solids
Safety Profile	Questionable carcinogen with experimental tumorigenic data. Experimental reproductive effects. The dust may ignite spontaneously in air. Flammable when exposed to heat or flame or by chemical reaction. Titanium can burn in an atmosphere of carbon dioxide, nitrogen, or air. Also reacts violently with BrF3, CuO, PbOx (Ni + KClO3), metaloxy salts, halocarbons, halogens, CO2, metal carbonates, Al, water, AgF, O2 , nitryl fluoride, HNO3,O2, KClO3, KNO3 , KMnO4, steam @ 704°, trichloroethylene, trichlorotrifluoroethane. Ordinary extinguishers are often ineffective against titanium fires. Such fires require special extinguishers designed for metal fires. In airtight enclosures, titanium fires can be controlled by the use of argon or helium. Titanium, in the absence of moisture, burns slowly, but evolves much heat. The application of water to burning titanium can cause an explosion. Finely dwided titanium dust and powders, like most metal powders, are potential explosion hazards when exposed to sparks, open flame, or high-heat sources. See also TITANIUM COMPOUNDS, POWDERED METALS, and MAGNESIUM. less more
Hazardous Substances Data	7440-32-6(Hazardous Substances Data)

Raw materials And Preparation Products

Hazard Information

General Description

TITANIUM POWDER, DRY(7440-32-6) is a gray lustrous powder. TITANIUM POWDER, DRY(7440-32-6) can be easily ignited and burns with an intense flame. The very finely powdered material may be ignited by sparks.

Reactivity Profile

TITANIUM reacts violently with cupric oxide and lead oxide when heated. When titanium is heated with potassium chlorate, potassium nitrate, or potassium permanganate, an explosion occurs [Mellor 7:20. 1946-47]. The residue from the reaction of titanium with red fuming nitric acid exploded violently when the flask was touched [Allison 1969]. Liquid oxygen gives a detonable mixture when combined with powdered titanium, [Kirchenbaum 1956].

Air & Water Reactions

Highly flammable. Pyrophoric in dust form [Bretherick 1979, p. 104]. Titanium is water-reactive at 700C, releasing hydrogen, which may cause an explosion [Subref: Mellor, 1941, vol. 7, 19].

Health Hazard

Fire will produce irritating, corrosive and/or toxic gases. Inhalation of decomposition products may cause severe injury or death. Contact with substance may cause severe burns to skin and eyes. Runoff from fire control may cause pollution.

Potential Exposure

Titanium metal, because of its low weight, high strength, and heat resistance, is used in the aerospace and aircraft industry as tubing, fittings, fire walls; cowlings, skin sections; jet compressors; and it is also used in surgical appliances. It is used, too, as controlwire casings in nuclear reactors, as a protective coating for mixers in the pulp-paper industry and in other situations in which protection against chlorides or acids is required; in vacuum lamp bulbs and X-ray tubes; as an addition to carbon and tungsten in electrodes and lamp filaments; and to the powder in the pyrotechnics industry. It forms alloys with iron, aluminum, tin, and vanadium, of which ferrotitanium is especially important in the steel industry. Other titanium compounds are utilized in smoke screens, as mordants in dyeing; in the manufacture of cemented metal carbides; as thermal insulators; and in heat resistant surface coatings in paints and plastics.

Fire Hazard

Flammable/combustible material. May ignite on contact with moist air or moisture. May burn rapidly with flare-burning effect. Some react vigorously or explosively on contact with water. Some may decompose explosively when heated or involved in a fire. May re-ignite after fire is extinguished. Runoff may create fire or explosion hazard. Containers may explode when heated.

First aid

If this chemical gets into the eyes, remove any contact lenses at once and irrigate immediately for at least 15 minutes, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts the skin, remove contaminated clothing and wash immediately with soap and water. Seek medical attention immediately. If this chemical has been inhaled, remove from exposure, begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR if heart action has stopped. Transfer promptly to a medical facility. When this chemical has been swallowed, get medical attention. Give large quantities of water and induce vomiting. Do not make an unconscious person vomit.

Shipping

UN2546 Titanium powder, dry, Hazard Class: 4.2; Labels: 4.2-Spontaneously combustible material.

Incompatibilities

Powder and dust may ignite spontaneously in air. Violent reactions occur on contact with water, steam, halocarbons, halogens, and aluminum. The dry powder is a strong reducing agent; Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause firesor explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, epoxides.

Description

Titanium was discovered by the Reverend William Gregor in 1791, and is named after the ‘Titans’ of Greek mythology. The metal was not isolated in a pure state until 1910, and useful quantities were not available for industrial applications until 1946, when an economical purification process was developed.

Chemical Properties

Titanium is a silvery metal or dry, dark-gray amorphous, lustrous powder.

Isotopes

There are 23 known isotopes of titanium. All but five are radioactive, rangingfrom Ti-38 to Ti-61, and have half-lives varying from a few nanoseconds to a few hours.The percentages of the five stable isotopes found in nature are as follows: ⁴⁶Ti = 8.25%,⁴⁷Ti = 7.44%, ⁴⁸Ti = 73.72%, ⁴⁹Ti = 5.41%, and ⁵⁰Ti = 5.18%.

Origin of Name

It was named after “Titans,” meaning the first sons of the Earth as stated in Greek mythology.

Occurrence

Titanium is the ninth most abundant element found in the Earth’s crust, but not in pureform. It is found in two minerals: rutile, which is titanium dioxide (TiO₂), and ilmenite(FeTiO₃). It is also found in some iron ores and in the slag resulting from the productionof iron. The mineral rutile is the major source of titanium production in the United States.Although titanium is widely spread over the crust of the Earth, high concentrations of itsminerals are scarce. In the past it was separated from it ores by an expensive process ofchemical reduction that actually limited the amount of metal produced. A two-step processinvolves heating rutile with carbon and chlorine to produce titanium tetrachloride—TiO₂+ C + 2Cl₂ ?→ TiCl₄ + CO₂—which is followed by heating the titanium tetrachloridewith magnesium in an inert atmosphere: TiCl₄ + 2Mg ?→ Ti + 2 MgCl₂. As recently as theyear 2000, a method of electrolysis was developed using titanium tetrachloride in a bath ofrare-earth salts. This process can be used on a commercial scale that makes the productionof titanium much less expensive. Titanium was, and still is, a difficult element to extractfrom its ore.Titanium is found throughout the universe and in the stars, the sun, the moon, and themeteorites that land on Earth.

Characteristics

As the first element in group 4, titanium has characteristics similar to those of the othermembers of this group: Zr, Hf, and Rf. Titanium is a shiny, gray, malleable, and ductile metalcapable of being worked into various forms and drawn into wires.

History

In 1791 Reverend William Gregor (1761–1817), an amateur mineralogist, discoveredan odd black sandy substance in his neighborhood. Because it was somewhat magnetic, hecalculated that it was almost 50% magnetite (a form of iron ore). Most of the remainder ofthe sample was a reddish-brown powder he dissolved in acid to produce a yellow substance.Thinking he had discovered a new mineral, he named it “menachanite,” after the Menachanregion in Cornwall where he lived. During this period, Franz Joseph Muller (1740–1825) alsoproduced a similar substance that he could not identify. In 1793 Martin Heinrich Klaproth(1743–1817), who discovered several new elements and is considered the father of modernanalytical chemistry, identified the substance that Gregor called a mineral as a new element.Klaproth named it “titanium,” which means “Earth” in Latin.

Uses

As alloy with copper and iron in titanium bronze; as addition to steel to impart great tensile strength; to aluminum to impart resistance to attack by salt solutions and by organic acids; to remove traces of oxygen and nitrogen from incandescent lamps. Surgical aid (fracture fixation).

Uses

Given titanium’s lightness, strength, and resistance to corrosion and high temperatures, itsmost common use is in alloys with other metals for constructing aircraft, jet engines, and missiles. Its alloys also make excellent armor plates for tanks and warships. It is the major metalused for constructing the stealth aircraft that are difficult to detect by radar.Titanium’s noncorrosive and lightweight properties make it useful in the manufacture oflaboratory and medical equipment that will withstand acid and halogen salt corrosion. Thesesame properties make it an excellent metal for surgical pins and screws in the repair of brokenbones and joints.It has many other uses as an abrasive, as an ingredient of cements, and as a paint pigmentin the oxide form and in the paper and ink industries, in batteries for space vehicles, andwherever a metal is needed to resist chlorine (seawater) corrosion.

Uses

Titanium is added to steel and aluminumto enhance their tensile strength and acidresistance. It is alloyed with copper and ironin titanium bronze.

Production Methods

Titanium is the ninth most abundant element and accounts for about 0.63% of the Earth’s crust. Analyses of rock samples from the moon indicate that titanium is far more abundant there; some lunar rocks consist of 12% titanium by weight. World production of titanium sponge metal was estimated at 69,000 metric tons in 1991. The most important titaniumbearing minerals are ilmenite, rutile, and leucoxene. Ilmenite (FeTiO₃) is found in beach sands (Australia, India, and Florida) and in rock deposits associated with iron (Norway and Finland). Ilmenite accounts for about 91%of the world’s consumption of titanium minerals and world resources of anatase, ilmenite, and rutile total more than 2 billion tons. Rutile (a form ofTiO₂) is less abundant; its chief source is certain Australian beach sands. Two other less prominent forms of TiO2 exist, anatase and brookite. The ores vary around the world in TiO₂ content from 39% to 96%. Anatase is used as a food color.

Hazard

Almost all of titanium’s compounds, as well as the pure metal when in powder form, areextremely flammable and explosive. Titanium metal will ignite in air at 1200°C and willburn in an atmosphere of nitrogen. Titanium fires cannot be extinguished by using water orcarbon dioxide extinguishers. Sand, dirt, or special foams must be used to extinguish burningtitanium.

Flammability and Explosibility

Nonflammable

reaction suitability

core: titanium

Environmental Fate

Titanium is poorly absorbed by plants and animals and is retained to only a certain extent. High levels of titanium in food products can be detects, however, when soil is contaminated by fly-ash fallout or titanium-containing sewage residues and when titanium dioxide is used as a food whitener. Food, which is considered to be the most important source of exposure to titanium, contributes >99% of the daily intake of the element. There are no relevant tolerable intakes for titanium against which to compare estimated dietary intake. Typical diets may contain approximately 0.3–0.5 mg titanium.
Titanium content of soil generally ranges from 0.3 to 6%, high levels of which are found in the vicinity of power plants because of combustion of coal.
Titanium concentrations in the atmosphere are comparatively low. Annual average concentrations in urban air are mostly <0.1 mgm^-3 and they are lower still in rural air. Air concentrations up to 0.5 mgm^-3 have been reported in urban and industrialized areas.

Toxicity evaluation

Many data indicate that titanium is absorbed poorly from the gastrointestinal tract in human beings. It is likely that transferrin may act as a specific carrier of titanium ions and may play a central role during the transport and biodistribution of soluble titanium species throughout the organism. Titanium concentrations found generally in urine suggest an absorption of <5%, assuming a daily intake of at least 300 mg.

Toxics Screening Level

The initial threshold screening level (ITSL) for acute exposure to titanium is 24 μg/m3 (8-hour averaging time).

Material Safety Data Sheet(MSDS)

Questions And Answer

History, Occurrence and Uses
Titanium was discovered in 1790 by English chemist William Gregor. Five years later in 1795, Klaproth confirmed Gregor’s findings from his independent investigation and named the element titanium after the Latin name Titans, the mythical first sons of the Earth. The metal was prepared in impure form first by Nilson and Pettersson in 1887. Hunter, in 1910, prepared the metal in pure form by reducing titanium tetrachloride with sodium.

Titanium occurs in nature in the minerals rutile( TiO2), ilmenite (FeTiO3), geikielite, (MgTiO3) perovskite (CaTiO3) and titanite or sphene (CaTiSiO4(O,OH,F)). It also is found in many iron ores. Abundance of titanium in the earth’s crust is 0.565%. Titanium has been detected in moon rocks and meteorites. Titanium oxide has been detected in the spectra of M-type stars and interstellar space.
Titanium is found in plants, animals, eggs, and milk.
Many titanium alloys have wide industrial applications. Titanium forms alloys with a number of metals including iron, aluminum, manganese, and molybdenum. Its alloys are of high tensile strength, lightweight, and can withstand extreme temperatures. They are used in aircraft and missiles. The metal also has high resistance to sea water corrosion and is used to protect parts of the ships exposed to salt water. Also, titanium is used to combine with and remove traces of oxygen and nitrogen from incandescent lamps. Titanium compounds, notably the dioxide and the tetrachloride, have many uses (See Titanium Dioxide and Titanium Tetrachloride.) ;
Physical Properties
White lustrous metal; ductile when free of oxygen; low density high strength metal.
Titanium has two allotropic modifications: (1) alpha form and (2) beta modification. The alpha form has a close-packed hexagonal crystal structure; density 4.54 g/cm3 at 20°C and stable up to 882°C. It converts very slowly to a body-centered cubic beta form at 882°C. The density of the beta form is 4.40 g/cm3 at 900°C (estimated). The other physical properties are as follows: The metal melts at 1,610 ±10°C; vaporizes at 3,287°C; electrical resitivity 42 microhm-cm; modulus of elasticity 15.5x106 psi at 25°C; tensile strength, ultimate 34,000 psi (at 25°C); tensile strength yield 20,000 psi (at 25°C); Vickers hardness 80-100; surface tension at the melting point 1427dynes/cm3; superconductivity below 1.73°K; thermal neutron absorption cross section 5.8 barns; insoluble in water; soluble in dilute acids. ;
Production
The production of titanium always encounters difficulties because of a tendency to react with oxygen, nitrogen and moisture at elevated temperatures. Most high purity elemental titanium can be produced by the Kroll process from titanium tetrachloride. The tetrachloride is reduced with magnesium in a mild steel vessel at about 800°C under an inert atmosphere of helium or argon. The net reaction is as follows:
TiCl4 + 2Mg → Ti + 2 MgCl2
The reaction is highly exothermic providing heat needed to maintain high temperature required for reaction. The Kroll process is applied commercially to produce elemental titanium.
Sodium metal can be used instead of magnesium in thermally reducing titanium tetrachloride.
Titanium metal also can be produced by electrolytic methods. In electrolysis, fused mixtures of titanium tetrachloride or lower chlorides with alkaline earth metal chlorides are electrolyzed to produce metal. Also, pure titanium can be prepared from electrolysis of titanium dioxide in a fused bath of calcium-, magnesiumor alkali metal fluorides. Other alkali or alkaline metal salts can be substituted for halides in these fused baths. Other titanium compouds that have been employed successfully in electrolytic titanium production include sodium fluotitanate and potassium fluotitanate.
Very highly pure titanium metal can be prepared in small amounts by decomposition of pure titanium tetraiodide, (TiI4) vapor on a hot wire under low pressure (Van Arkel–de Boer method). ;
Reactions
Titanium metal is very highly resistant to corrosion. It is unaffected by atmospheric air, moisture and sea water, allowing many of its industrial applications. The metal burns in air at about 1,200°C incandescently forming titanium dioxide TiO2. The metal also burns on contact with liquid oxygen. Titanium forms four oxides, all of which have been well described. It forms a weakly basic monoxide, TiO; a basic dititanium trioxide, Ti2O3; the amphoteric dioxide, TiO2; and the acidic trioxide, TiO3.
Titanium combines with nitrogen at about 800°C forming the nitride and producing heat and light. It is one of the few elements that burns in nitrogen. Titanium reacts with all halogens at high temperatures. It reacts with fluorine at 150°C forming titanium tetrafluoride, TiF4. Reaction with chlorine occurs at 300°C giving tetrachloride TiCl4. Bromine and iodine combine with the metal at 360°C forming their tetrahalides.
Water does not react with Ti metal at ambient temperatures, but tianium reacts with steam at 700°C forming the oxide and hydrogen:
Ti + 2H2O → TiO2 + 2H2
Titanium is soluble in hot concentrated sulfuric acid, forming sulfate. It also reacts with hydrofluoric acid forming the fluoride.
Nitric acid at ordinary temperatures does not react with Ti metal, but hot concentrated nitric acid oxidizes titanium to titanium dioxide.
The metal is stable with alkalies.
Titanium combines with several metals, such as, iron, copper, aluminum, chromium, cobalt, nickel, lead and tin at elevated temperatures forming alloys. ;

Well-known Reagent Company Product Information

Supplier

Anhui Kerun Nano Technology Co., Ltd.

Telephone0564-3636590 15956460423

Websitehttps://www.chemicalbook.com/ShowSupplierProductsList529945/0.htm

Meryer (Shanghai) Chemical Technology Co., Ltd.

Telephone4006356688 18621169109

Websitehttp://www.x-labseek.com/

3B Pharmachem (Wuhan) International Co.,Ltd.

Telephone 18930552037

Websitehttps://www.chemicalbook.com/ShowSupplierProductsList13285/0_EN.htm

Alfa Aesar

Telephone400-6106006

Websitehttp://chemicals.thermofisher.cn

Energy Chemical

Telephone 400-0056266

Websitehttp://www.energy-chemical.com

Shanghai Hanhong Scientific Co.,Ltd.

Telephone021-54306202 13764082696

Websitehttps://www.hanhongsci.com

Shandong Xiya Chemical Co., Ltd

Telephone13355009207 13355009207

Websitehttp://www.xiyashiji.com

Sichuan Kulinan Technology Co., Ltd

Telephone400-1166-196 18981987031

Websitehttp://www.hx-r.com/

Tianjin heowns Biochemical Technology Co., Ltd.

Telephone400 638 7771

Websitehttp://www.heowns.com

Sinopharm Chemical Reagent Co,Ltd.

Telephone86-21-63210123

Websitehttp://www.reagent.com.cn

Beijing Yan Nuo XinCheng Chemical Co., Ltd.

Telephone86-10-82830276

Websitehttps://www.chemicalbook.com/ShowSupplierProductsList15334/0_EN.htm

Chengdu Ai Keda Chemical Technology Co., Ltd.

Telephone4008-755-333 18080918076

Websitehttp://www.aikeshiji.com

Thermo Fisher Scientific

Telephone800-810-5118

Websitehttp://www.thermo.com.cn

9ding chemical ( Shanghai) Limited

Telephone4009209199

Websitehttp://www.9dingchem.com

Shanghai Aladdin Bio-Chem Technology Co.,LTD

Telephone400-6206333 13167063860

Websitehttp://www.aladdin-e.com/

Chengdu HuaXia Chemical Reagent Co. Ltd

Telephone400-1166-196 13458535857

Websitehttp://www.hx-r.com

Shanghai YuLue Chemical Co., Ltd.

Telephone021-60345187 13671753212

Websitehttps://www.chemicalbook.com/ShowSupplierProductsList16365/0_EN.htm

Shanghai Macklin Biochemical Co.,Ltd.

Telephone15221275939 15221275939

Websitehttp://www.macklin.cn

1of4

Related Products

Send Inquriy

7440-32-6

Chemical Properties

Safety Data

Raw materials And Preparation Products

Raw materials

Preparation Products

Hazard Information

General Description

Reactivity Profile

Air & Water Reactions

Health Hazard

Potential Exposure

Fire Hazard

First aid

Shipping

Incompatibilities

Description

Chemical Properties

Isotopes

Origin of Name

Occurrence

Characteristics

History

Uses

Uses

Uses

Production Methods

Hazard

Flammability and Explosibility

reaction suitability

Environmental Fate

Toxicity evaluation

Toxics Screening Level

Material Safety Data Sheet(MSDS)

Questions And Answer

History, Occurrence and Uses

Physical Properties

Production

Reactions

Well-known Reagent Company Product Information

Supplier

Related Products