ChemicalBook CAS DataBase List 7440-02-0

7440-02-0

Name	Nickel
CAS	7440-02-0
EINECS(EC#)	231-853-9
Molecular Formula	Ni
MDL Number	MFCD00003414
Molecular Weight	58.69
MOL File	7440-02-0.mol

Chemical Properties

Description	Nickel is a hard, silvery white, malleable metal chunk or grey powder. Nickel powder is pyrophoric – can ignite spontaneously. It may react violently with titanium, ammonium nitrate, potassium perchlorate, and hydrazoic acid. It is incompatible with acids, oxidising agents, and sulphur. The industrially important nickel compounds are nickel oxide (NiO), nickel acetate (Ni(C2H3O2), nickel carbonate (NiCO3), nickel carbonyl (Ni(CO)4), nickel subsulphide (NiS2), nickelocene (C5H5)2Ni, and nickel sulphate hexahydrate (NiSO4 · 6H2O). Nickel compounds have been well established as human carcinogens. Investigations into the molecular mechanisms of nickel carcinogenesis have revealed that not all nickel compounds are equally carcinogenic: certain water-insoluble nickel compounds exhibit potent carcinogenic activity, whereas highly water-soluble nickel compounds exhibit less potency. The reason for the high carcinogenic activity of certain water-insoluble nickel compounds relates to their bioavailability and the ability of the nickel ions to enter cells and reach chromatin. The water-insoluble nickel compounds enter cells quite efficiently via phagocytic processes and subsequent intracellular dissolution. Nickel is classified as a borderline metal ion because it has both soft and hard metal properties and it can bind to sulphur, nitrogen, and oxygen groups. Nickel ions are very similar in structure and coordination properties to magnesium. less more
Appearance	Nickel metal is a hard, ductile, magnetic metal with a silver-white color.
Melting point	1453 °C (lit.)
Boiling point	2732 °C (lit.)
density	8.9
vapor density	5.8 (vs air)
storage temp.	Flammables area
solubility	insoluble in H2O; slightly soluble in dilute acid solutions
form	wire
color	White to gray-white
Specific Gravity	8.9
Odor	Odorless
PH	8.5-12.0
PH Range	9 - 11 at 20 °C
Stability:	Stable in massive form. Powder is pyrophoric-can ignite spontaneously. May react violently with titanium, ammonium nitrate, potassium perchlorate, hydrazoic acid. Incompatible with acids, oxidizing agents, sulfur.
Resistivity	6.97 μΩ-cm, 20°C
Water Solubility	It is insoluble in water.
Sensitive	air sensitive
Merck	8107
Exposure limits	TLA-TWA (metal) 1 mg/m³ (ACGIH, MSHA, and OSHA); (soluble inorganic compounds) 0.1 mg(Ni)/m³ (ACGIH) 0.015 mg (Ni)/m³ (NIOSH); (insoluble inorganic compounds) 1 mg/m³ (ACGIH).
InChIKey	PXHVJJICTQNCMI-UHFFFAOYSA-N
History	Discovered by Cronstedt in 1751 in kupfernickel (niccolite). Nickel is found as a constituent in most meteorites and often serves as one of the criteria for distinguishing a meteorite from other minerals. Iron meteorites, or siderites, may contain iron alloyed with from 5 to nearly 20% nickel. Nickel is obtained commercially from pentlandite and pyrrhotite of the Sudbury region of Ontario, a district that produces much of the world’s nickel. It is now thought that the Sudbury deposit is the result of an ancient meteorite impact. Large deposits of nickel, cobalt, and copper have recently been developed at Voisey’s Bay, Labrador. Other deposits of nickel are found in Russia, New Caledonia, Australia, Cuba, Indonesia, and elsewhere. Nickel is silvery white and takes on a high polish. It is hard, malleable, ductile, somewhat ferromagnetic, and a fair conductor of heat and electricity. It belongs to the iron-cobalt group of metals and is chiefly valuable for the alloys it forms. It is extensively used for making stainless steel and other corrosion- resistant alloys such as Invar?, Monel?, Inconel?, and the Hastelloys?. Tubing made of a copper-nickel alloy is extensively used in making desalination plants for converting sea water into fresh water. Nickel is also now used extensively in coinage and in making nickel steel for armor plate and burglar-proof vaults, and is a component in Nichrome?, Permalloy?, and constantan. Nickel added to glass gives a green color. Nickel plating is often used to provide a protective coating for other metals, and finely divided nickel is a catalyst for hydrogenating vegetable oils. It is also used in ceramics, in the manufacture of Alnico magnets, and in batteries. The sulfate and the oxides are important compounds. Natural nickel is a mixture of five stable isotopes; twenty-five other unstable isotopes are known. Nickel sulfide fume and dust, as well as other nickel compounds, are carcinogens. Nickel metal (99.9%) is priced at about $2/g or less in larger quantities.
CAS DataBase Reference	7440-02-0(CAS DataBase Reference)
IARC	2B (Vol. Sup 7, 49) 1990
NIST Chemistry Reference	Nickel(7440-02-0)
EPA Substance Registry System	7440-02-0(EPA Substance)

Safety Data

Hazard Codes	C,Xi,Xn,F
Risk Statements	R34:Causes burns. R50/53:Very Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment . R43:May cause sensitization by skin contact. R40:Limited evidence of a carcinogenic effect. R10:Flammable. R17:Spontaneously flammable in air. less more
Safety Statements	S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice . S45:In case of accident or if you feel unwell, seek medical advice immediately (show label where possible) . S60:This material and/or its container must be disposed of as hazardous waste . S61:Avoid release to the environment. Refer to special instructions safety data sheet . S36:Wear suitable protective clothing . S22:Do not breathe dust . S36/37:Wear suitable protective clothing and gloves . S16:Keep away from sources of ignition-No smoking . S15:Keep away from heat . S5:Keep contents under ... (appropriate liquid to be specified by the manufacturer) . less more
RIDADR	UN 1493 5.1/PG 2
WGK Germany	3
RTECS	VW4725000
F	8
Autoignition Temperature	87 °C
TSCA	Yes
HazardClass	4.1
PackingGroup	II
HS Code	38151100
Safety Profile	Confirmed carcinogen with experimental carcinogenic, neoplastigenic, and tumorigenic data. Poison by ingestion, intratracheal, intraperitoneal, subcutaneous, and intravenous routes. An experimental teratogen. Ingestion of soluble salts causes nausea, vomiting, and diarrhea. Mutation data reported. Hypersensitivity to nickel is common and can cause allergic contact dermatitis, pulmonary asthma, conjunctivitis, and inflammatory reactions around nickel-containing medcal implants and prostheses. Powders may ignite spontaneously in air. Reacts violently with F2, NH4NO3, hydrazine, NH3, (H2 + dioxane), performic acid, P, Se, S, (Ti + KCLO3). Incompatible with oxidants (e.g., bromine pentafluoride, peroxyformic acid, potassium perchlorate, chlorine, nitryl fluoride, ammonium nitrate), Raney-nickel catalysts may initiate hazardous reactions with ethylene + aluminum chloride, pdioxane, hydrogen, hydrogen + oxygen, magnesium silicate, methanol, organic solvents + heat, sulfur compounds. Nickel catalysts have caused many industrial accidents. less more
Hazardous Substances Data	7440-02-0(Hazardous Substances Data)
IDLA	10 mg Ni/m3

Raw materials And Preparation Products

Hazard Information

General Description

RANEY NICKEL(7440-02-0) catalyst, is extremely fine powdered nickel. RANEY NICKEL(7440-02-0) is grayish colored. Insoluble in water. Nickel catalyst is used to promote the chemical action in manufacturing synthetics and to process vegetable oil and petroleum. If exposed to air or moisture, RANEY NICKEL(7440-02-0) may become hot enough to ignite. RANEY NICKEL(7440-02-0) is insoluble in water and does not react with larger volumes of water.

Reactivity Profile

Metals, such as METAL CATALYST, are reducing agents and tend to react with oxidizing agents. Their reactivity is strongly influenced by their state of subdivision: in bulk they often resist chemical combination; in powdered form they may react very rapidly. Thus, as a bulk metal RANEY NICKEL is somewhat unreactive, but finely divided material may be pyrophoric. The metal reacts exothermically with compounds having active hydrogen atoms (such as acids and water) to form flammable hydrogen gas and caustic products. The reactions are less vigorous than the similar reactions of alkali metals, but the released heat can still ignite the released hydrogen. Materials in this group may react with azo/diazo compounds to form explosive products. These metals and the products of their corrosion by air and water can catalyze polymerization reactions in several classes of organic compounds; these polymerizations sometimes proceed rapidly or even explosively. Some metals in this group form explosive products with halogenated hydrocarbons. Can react explosively with oxidizing materials.

Air & Water Reactions

Pyrophoric, Ignites spontaneously in the presence of air; during storage, H2 escapes with fire and explosion hazards; reacts violently with acids forming H2. [Handling Chemicals Safely 1980. p. 807].

Hazard

Flammable and toxic as dust or fume. Dermatitis and pneumoconiosis. A confirmed carcinogen

Health Hazard

Fire will produce irritating, corrosive and/or toxic gases. Inhalation of decomposition products may cause severe injury or death. Contact with substance may cause severe burns to skin and eyes. Runoff from fire control may cause pollution.

Potential Exposure

Nickel is used as an alloy additive in steel manufacture; in the production of coins and other utensils. Nickel forms alloys with copper, manganese, zinc, chromium, iron, molybdenum, etc. Stainless steel is the most widely used nickel alloy. An important nickel copper alloy is Monel metal, which contains 66% nickel and 32% copper and has excellent corrosion resistance properties. Permanent magnets are alloys chiefly of nickel, cobalt, aluminum, and iron. Elemental nickel is used in electroplating, anodizing aluminum casting operations for machine parts; and in coinage; in the manufacture of acid-resisting and magnetic alloys; magnetic tapes; surgical and dental instruments; nickel cadmium batteries; nickel soaps in crankcase oil; in ground-coat enamels; colored ceramics; and glass. It is used as a catalyst in the hydrogenation synthesis of acrylic esters for plastics. Exposure to nickel may also occur during mining, smelting, and refining operations. The route by which most people in the general population receive the largest portion of daily nickel intake is through food. Based on the available data from composite diet analysis, between 300 and 600 μg nickel per day are ingested. Fecal nickel analysis, a more accurate measure of dietary nickel intake, suggests about 300 μg per day. The highest level of nickel observed in water was 75 μg/L. Average drinking water levels are about 5 μg/L. A typical consumption of 2 L daily would yield an additional 10 μg of nickel, of which up to 1 μg would be absorbed.

Fire Hazard

Flammable/combustible material. May ignite on contact with moist air or moisture. May burn rapidly with flare-burning effect. Some react vigorously or explosively on contact with water. Some may decompose explosively when heated or involved in a fire. May re-ignite after fire is extinguished. Runoff may create fire or explosion hazard. Containers may explode when heated.

First aid

If this chemical gets into the eyes, remove any contact lenses at once and irrigate immediately for at least 15 minutes, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts the skin, remove contaminated clothing and wash immediately with soap and water. Seek medical attention immediately. If this chemical has been inhaled, remove from exposure, begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR if heart action has stopped. Transfer promptly to a medical facility. When this chemical has been swallowed, get medical attention. Give large quantities of water and induce vomiting. Do not make an unconscious person vomit.

Shipping

UN3089 Metal powders, flammable, n.o.s., Hazard Class: 4.1; Labels: 4.1-Flammable solid. UN3077 Environmentally hazardous substances, solid, n.o.s., Hazard Class: 9; Labels: 9-Miscellaneous hazardous material, Technical Name Required.

Incompatibilities

Nickel dust is a spontaneously flammable solid and a dangerous fire hazard.

Chemical Properties

RANEY NICKEL is a hard, ductile, magnetic metal with a silver-white color.

Chemical Properties

silver white, hard, malleable metal chunks or grey powder

Waste Disposal

Nickel compoundsencapsulation followed by disposal in a chemical waste landfill. However, nickel from various industrial wastes may also be recovered and recycled as described in the literature.

Physical properties

Nickel metal does not exist freely in nature. Rather, it is located as compounds in ores ofvarying colors, ranging from reddish-brown rocks to greenish and yellowish deposits, andin copper ores. Once refined from its ore, the metallic nickel is a silver-white and hard butmalleable and ductile metal that can be worked hot or cold to fabricate many items. Nickel,located in group 10, and its close neighbor, copper, just to its right in group 11 of the periodictable, have two major differences. Nickel is a poor conductor of electricity, and copper is anexcellent conductor, and although copper is not magnetic, nickel is. Nickel’s melting point is1,455°C, its boiling point is 2,913°C, and its density is 8.912 g/cm³.

Isotopes

There are 31 isotopes of nickel, ranging from Ni-48 to Ni-78. Five of these arestable, and the percentage of their contribution to the element’s natural existence onEarth are as follows: Ni-58 = 68.077%, Ni-60 = 26.223%, Ni-61 = 1.140%, Ni-62 =3.634%, and Ni 64 = 0.926%. All of the other 26 isotopes of nickel are artificially madeand radioactive with half-lives ranging from a few nanoseconds to 7.6×10⁴ years.

Origin of Name

The name is derived from the ore niccolite, meaning “Old Nick,” referred to as the devil by German miners. The niccolite mineral ore was also called “kupfernickel,” which in German stands for two things; first, it is the name of a gnome (similar to Cobalt), and second, it refers to “Old Nick’s false copper.”

Occurrence

Nickel is the 23rd most abundant element found in the Earth’s crust. It is somewhat plentiful but scattered and makes up one-hundredth of 1% of igneous rocks. Nickel metal is foundin meteorites (as are some other elements). It is believed that molten nickel, along with iron,makes up the central sphere that forms the core of the Earth.There are several types of nickel ores. One is the major ore for nickel called pentlandite(NiS ? 2FeS), which is iron/nickel sulfide. Another is a mineral called niccolite (NiAs), discovered in 1751 and first found in a mining area of Sweden. By far, the largest mining area fornickel is located in Ontario, Canada, where it is recovered from what is thought to be a verylarge meteorite that crashed into the Earth eons ago. This large nickel deposit is one reasonfor the theory of the Earth’s core being molten nickel and iron, given that both the Earth andmeteorites were formed during the early stages of the solar system. Some nickel ores are alsofound in Cuba, the Dominican Republic, and Scandinavia. Traces of nickel exist in soils, coal,plants, and animals.

Characteristics

As mentioned, nickel is located in group 10 (VIII) and is the third element in the specialtriad (Fe, Co, Ni) of the first series of the transition elements. Nickel’s chemical and physicalproperties, particularly its magnetic peculiarity, are similar to iron and cobalt.Some acids will attack nickel, but it offers excellent protection from corrosion from air andseawater. This quality makes it excellent for electroplating other metals to form a protectivecoating. Nickel is also an excellent alloy metal, particularly with iron, for making stainless steelas well as a protective armor for military vehicles. It is malleable and can be drawn throughdies to form wires. About one pound of nickel metal can be drawn to about 200 miles of thinwire.

Definition

A transition metal that occurs naturally as the sulfide and silicate. It is extracted by the Mond process, which involves reduction of nickel oxide using carbon monoxide followed by the formation and subsequent decomposition of volatile nickel carbonyl. Nickel is used as a catalyst in the hydrogenation of alkenes, e.g. margarine manufacture, and in coinage alloys. Its main oxidation state is +2 and these compounds are usually green. Symbol: Ni; m.p. 1453°C; b.p. 2732°C; r.d. 8.902 (25°C); p.n. 28; r.a.m. 58.6934.

Definition

ChEBI: Chemical element (nickel group element atom) with atomic number 28.

Definition

nickel: Symbol Ni. A malleable ductilesilvery metallic transition element;a.n. 28; r.a.m. 58.70; r.d. 8.9;m.p. 1450°C; b.p. 2732°C. It is foundin the minerals pentlandite (NiS),pyrrhoite ((Fe,Ni)S), and garnierite((Ni,Mg)₆(OH)₆Si₄O₁₁.H₂O). Nickel isalso present in certain iron meteorites(up to 20%). The metal isextracted by roasting the ore to givethe oxide, followed by reductionwith carbon monoxide and purificationby the Mond process. Alternativelyelectolysis is used. Nickel metalis used in special steels, in Invar, and,being ferromagnetic, in magnetic alloys,such as Mumetal. It is also aneffective catalyst, particularly for hydrogenation reactions (see also raneynickel). The main compounds areformed with nickel in the +2 oxidationstate; the +3 state also exists (e.g.the black oxide, Ni₂O₃). Nickel wasdiscovered by Axel Cronstedt(1722–65) in 1751.

Preparation

The carbonyl process is most commonly employed when very pure nickel is required. The impure metal is reacted with pure carbon monoxide at 50° and the carbonyl produced fractionated several times prior to pyrolysis at around 200°. The nickel thus obtained has a purity of 99.90-99.99% depending upon the materials used.
Electrolytic methods for producing high purity nickel depend upon the production of high purity nickel salts. The nickel obtained by the electrolysis of pure nickel chloride solution with inert platinum-iridium anodes is 99.99% pure.

Production Methods

Nickel is obtained by processing sulfide and laterite ore concentrates using pyrometallurgic and hydrometallurgic processes. The resultant nickel matte obtained by roasting and smelting is subjected to further cleaning by electro-, vapo-, and hydrometallurgic refining methods. Some portion of the matte is roasted to obtain commercial nickel oxide agglomerate. Pure, 99.9% nickel can be obtained by electrolytic refining process.
The most pure, 99.97%, nickel is obtained by vapometallurgy. In this process, known also as the Mond method,nickel and copper sulfide blend is converted to oxides and then reduced by heating with water gas at 350–400°C. The resultant active form of nickel is treated with carbon monoxide to give volatile nickel carbonyl [Ni(CO)4]. The latter reaction is reversible; heating results in pure nickel and carbon monoxide.

Agricultural Uses

Nickel (Ni) is a silver-white, ductile, malleable, yet tough metallic element of Group 10 (formerly Group VIII) of the Periodic Table. Mostly, nickel goes into the making of steel and other corrosion resistant alloys. Finely divided nickel is used as a hydrogenation catalyst. Nickel is a beneficial trace element for plants.
Its presence in the urease enzyme underlines its importance as a functional element. It is essential for grain viability, in barley and at concentrations less than 100 μg/kg, the grain level and the germination frequency decrease progressively. The quantity of Ni in a few fertilizers is as given: 2 ppm in nitrochalk, 13 ppm in superphosphate and 10 ppm in FYM.
Nickel is the metal component of urease that hydrolyzes urea to give ammonia and carbon dioxide. Compounds that react with nickel in the urease molecule inhibit the hydrolysis of urea.
Nickel enhances the nodule weight and the seed yield of soybeans, chickpeas and temperate cereals. It is present in plants in the range of 0.1 to 1O ppm of the dry weight.
High levels of Ni may induce Zn or Fe deficiency because of cation competition, and may create nickel toxicity. The browning and necrosis of the leaf tips and margins are the toxicity symptoms on the plant. High Ni content also causes the distortion of young leaves and the death of the terminal shoots of the plant. The emerging leaves may fail to unroll and become necrotic, with the necrosis starting from near the base and spreading toward the leaf tip. Nickel toxicity in cereals and grasses varies in the intensity of chlorosis along the length of the leaf with a series of transverse bands.
Sewage sludge contains heavy metals like Ni, Cd, etc. that are absorbed by plants grown in soils contaminated with these heavy metals. The toxicity caused by these metals is in turn, passed on to animals that feed on such plants. Any regulation for sludge use should ensure that the soil pH is not lower than 6.5, as heavy metals are insoluble at pH greater than 6.5.

Carcinogenicity

Metallic nickel is reasonably anticipated to be a human carcinogenbased on sufficient evidence of carcinogenicity from studies in experimental animals.

Environmental Fate

Nickel and its compounds are naturally present in the Earth’s crust, and nickel can be released into the atmosphere via natural discharges such as windblown dust and volcanic eruptions. It is estimated that 8.5 million kilograms of nickel are emitted into the atmosphere from natural sources such as windblown dust, volcanoes, and vegetation each year. Anthropogenic activities constitute significant discharge into the environment, particularly in the form of particulate matter and nickel compounds not normally found naturally; these sources comprise five times the quantity estimated to come from natural sources.
Nickel releases are mainly in the form of aerosols that cover a broad spectrum of sizes. Particulates from power plants tend to be associated with smaller particles than those from smelters. Atmospheric aerosols are removed by gravitational settling and dry and wet deposition. Submicrometer particles may have atmospheric half-lives as long as 30 days. Monitoring data confirm that nickel can be transported far from its source, and that the form of nickel emitted to the atmosphere will vary according to the type of source. Species associated with combustion, incineration, and metals smelting and refining are often complex nickel oxides, nickel sulfate, metallic nickel, and in more specialized industries, nickel silicate, nickel subsulfide, and nickel chloride.
Nickel may be transported into streams and waterways from the natural weathering of soil as well as from anthropogenic discharges and runoff. This nickel can accumulate in sediment, with the adsorption of the metal to the soil depending on pH, redox potential, ionic strength of the water, concentration of complexing ions, and the metal concentration and type. Soluble nickel compounds such as nickel chloride would be expected to release divalent nickel into moist environments. Since these compounds quickly dissolve upon exposure to water, and partially due to the ubiquity of nickel in soil, water, and air, tracking the course of these compounds through the environment is difficult. This is particularly due to nickel’s ability to complex with anionic species other than chloride to form nickel oxide, sulfate, nitrate, carbonate, or acetate, among others.
Industrial uses of nickel result in nickel being distributed mainly at soil surfaces and through surrounding waterways and water tables. Once distributed to the soil, nickel(II) ions can potentially form inorganic crystalline minerals or precipitates, can complex or adsorb onto organic and inorganic surfaces, can participate in cation exchange, and can exist as free-ion or chelated metal complexes in soil solution.

Toxicity evaluation

Skin sensitization is believed to occur as a result of nickel binding to proteins (particularly on the cell surface) and hapten formation. The nickel–protein complex is recognized as foreign and an immune reaction follows. For example, sweat may react with the nickel in plated jewelry that comes in direct contact with skin; dissolved metal may penetrate and react with proteins in the skin, leading to immune sensitization. Nickel may substitute for certain other metals (especially zinc) in metal-dependent enzymes, leading to altered protein function. High nickel content in serum and tissue may interfere with both copper and zinc metabolism. It also readily crosses the cell membrane via calcium channels and competes with calcium for specific receptors.
Nickel can alter the sodium balance and lipid metabolism and can induce metallothionein synthesis. Dissolved nickel also affects the T-cell system and suppresses the activity of natural killer cells. If given orally or by inhalation, nickel chloride has been reported to decrease iodine uptake by the thyroid gland. The lipid peroxidation properties of nickel can introduce potential malignancies in humans, as DNA strand gaps and breaks in DNA–protein cross-links can form. The down-regulation of glycoprotein metabolism by nickel ions may produce nephrotoxicity in humans as well. Nickel carbonyl can cross-link amino acids to DNA and lead to formation of reactive oxygen species. Nickel carbonyl can also suppress natural killer cell activity and production of some interferons.
Responses in many of these assays were weak and occurred at toxic doses, and were affected by tissue culture conditions modifying uptake by the cell. The mechanism of nickel carcinogenesis is controversial, and is likely to vary with the form of nickel. The nickel ion (Ni2+) alone does not form premutagenic DNA lesions, suggesting that nickel causes indirect DNA damage, perhaps due to oxidative stress or blocking DNA repair mechanisms.
Nickel is an essential trace nutrient in plants and certain animal species (e.g., rat and chick); however, it has not been shown to be essential in humans.

Material Safety Data Sheet(MSDS)

Questions And Answer

History
Nickel was isolated first and recognized as an element by Cronstedt in 1751. The metal was derived in pure form by Richter in 1804. The metal takes its name from two German words ‘Nickel’ and ‘kupfernickel’, which mean Old Nick’s (or Satan) and Old Nick’s copper, respectively.
The abundance of nickel in the earth’s crust is only 84 mg/kg, the 24th most abundant element. It is found in most meteorites, particularly in the iron meteorites or siderites, alloyed with iron. Its average concentration in seawater is 0.56 μg/mL. Nickel is one of the major components of the earth’s core, comprising about 7%.
The most common nickel ores are pentlandite, (Ni,Fe)9S16, limonite, (Fe,Ni)O(OH)•nH2O, and garnierite, (Ni,Mg)6Si4O10(OH)8. Other ores that are of rare occurrence are the sulfide ores, millerite, NiS, polydymite Ni3S4 and siegenite, (Co,Ni)3S4; the arsenide ores niccolite, NiAs, gersdorffite, NiAsS, and annabergite, Ni3As2O8•8H2O; and the antimonide ore, NiSb. ;
Uses
The most important applications of nickel metal involve its use in numerous alloys. Such alloys are used to construct various equipment, reaction vessels, plumbing parts, missile, and aerospace components. Such nickel-based alloys include Monel, Inconel, Hastelloy, Nichrome, Duranickel, Udinet, Incoloy and many other alloys under various other trade names. The metal itself has some major uses. Nickel anodes are used for nickel plating of many base metals to enhance their resistance to corrosion. Nickel-plated metals are used in various equipment, machine parts, printing plates, and many household items such as scissors, keys, clips, pins, and decorative pieces. Nickel powder is used as porous electrodes in storage batteries and fuel cells.
Another major industrial use of nickel is in catalysis. Nickel and raney nickel are used in catalytic hydrogenation or dehydrogenation of organic compounds including olefins, fats, and oils. ;
Production
Nickel usually is recovered from its sulfide ore, pentlandite (Ni,Fe)9S16. Although laterite type oxide ores sometimes are used as starting materials, pentlandite is used in many commercial operations. Pentlandite often is found in nature associated with other sulfide minerals, such as pyrrhotite, Fe7S8,and chalcopyrite, CuFeS2.
The ores are crushed and powdered. Sulfides are separated from gangue by froth flotation or magnetic separation processes. After this, the ore is subjected to roasting and smelting. These steps are carried out initially in rotary kilns or multihearth furnaces and then smelting is done in either blast furnaces or reverberatory, or arc furnaces. Most sulfur is removed as sulfur dioxide. Iron and other oxides produced in roasting are also removed along with siliceous slag during smelting. A matte obtained after smelting usually contains impure nickel-iron-copper sulfides and sulfur. The molten matte is treated with silica and an air blower in a converter in the Bessemerizing stage to remove all remaining iron and sulfur.
Copper-nickel matte obtained in this stage is allowed to cool slowly over a few days to separate mineral crystals of copper sulfide, nickel sulfide and nickel-copper alloy. The cool matte is pulverized to isolate sulfides of nickel and copper by froth flotation. Nickel-copper alloy is extracted by magnetic separation. Nickel metal is obtained from the nickel sulfide by electrolysis using crude nickel sulfide cast into anodes and nickel-plated stainless steel cathodes.
Alternatively, nickel sulfide is roasted to nickel oxide, which then is reduced to crude nickel and is electrorefined as above.
Two other refining processes are also frequently employed. One involves hydrometallurgical refining in which sulfide concentrates are leached with ammonia solution to convert the copper, nickel, and cobalt sulfides into their complex amines. Copper is precipitated from this solution upon heating. Under such conditions, the sulfide-amine mixture of nickel and cobalt are oxidized to their sulfates. The sulfates then are reduced to metallic nickel and cobalt by heating with hydrogen at elevated temperatures under pressure. The metals are obtained in their powder form.
The more common carbonyl refining process involves reaction of crude nickel with carbon monoxide under pressure at 100°C to form nickel tetracarbonyl, Ni(CO)4. The liquid tetracarbonyl upon heating at 300°C decomposes to nickel metal and carbon monoxide. Very pure nickel can be obtained by the carbonyl refining processes, as no other metal forms a similar carbonyl under these conditions. ;
Reactions
At ordinary temperatures, bulk nickel in compact form has no perceptible reactivity with air or water. However, in finely-divided state, the metal reacts readily and can be pyrophoric under certain conditions. When heated in air at 400°C or with steam, nickel converts to its oxide, NiO.
When heated with bromine vapors or chlorine gas, nickel catches fire forming nickel bromide, NiBr2, and yellow nickel chloride, NiCl2, respectively. Finely divided nickel combines with carbon monoxide to form zero valent nickel tetracarbonyl, Ni(CO)4. The reaction occurs at 50°C and one atmosphere, although it is usually carried out at 200°C under high CO pressure between 100 to 400 atm for high yield of carbonyl, and to prevent product decomposition. Carbon monoxide at ordinary pressure may be passed over freshly reduced metal to form the tetracarbonyl.
Finely divided nickel absorbs a large volume of hydrogen at high temperatures. Even at ordinary temperatures, considerable occlusion of hydrogen occurs on to the metal surface and no definite composition of any hydride formed is known. The metal activates molecular hydrogen to its atomic state, contributing to its catalytic action in hydrogenation of unsaturated compounds.
Dilute mineral acids attack nickel to a varying extent. The metal dissolves readily in dilute nitric acid. Evaporation of the solution forms emerald green crystals of nickel nitrate hexahydrate, Ni(NO3)2•6H2O.
Actions of dilute hydrochloric and sulfuric acid on nickel are relatively slow: slower than on iron. Concentrated nitric acid passivates the metal, oxidizing it and forming a protective film on its surface which prevents any further reaction.
Nickel is stable in caustic alkalies. At moderate temperatures, it decomposes gaseous ammonia into hydrogen and nitrogen. Nickel combines with sulfur, phosphorus, carbon, arsenic, antimony, and aluminum at elevated temperatures. Fusion of nickel powder with molten sulfur yields nickel sulfide, NiS. Reaction with aluminum can be explosive at 1,300°C, forming nickelaluminum intermetallic products of varying compositions.
Nickel powder combines with carbon dioxide in ammonia solution forming nickel carbonate. Boiling the solution to expel ammonia precipitates pure carbonate, NiCO3.
Fine nickel powder reacts with sulfamic acid in hot aqueous solution under controlled conditions, forming nickel sulfamate tetrahydrate, Ni(SO3NH2)2•4H2O, used in electroplating baths. ;
Toxicity
Skin contact can cause dermatitis and a type of chronic eczema, known as “nickel itch”, caused by hypersensitivity reactions of nickel on the skin (Patnaik, P. 1999. A Comprehensive Guide to the Hazardous Properties of Chemical Substances, 2nd ed. pp. 621-622, New York: John Wiley & Sons.) Although oral toxicity of the metal is very low, ingestion may cause hyperglycemia and depression of the central nervous system. Chronic inhalation of nickel dust can cause lung and sinus cancers in humans. Nickel and certain of its compounds are listed by IARC under Group 2B carcinogens as “possibly carcinogenic to humans” (International Agency for Research on Cancer. 1990. IARC Monograph, Vol. 49: Geneva.) ;

Well-known Reagent Company Product Information

Supplier

ZHEJIANG YAMEI NANO TECHNOLOGY CO., LTD.

Telephone400-8200386 13456373028

Websitehttp://www.yameinanotech.com/

Shanghai Yaotian New Material Technology Co., LTD

Telephone021-64110338 18939791287

Websitehttps://www.chemicalbook.com/ShowSupplierProductsList1440513/0.htm

BROFOS NANOTECHNOLOGY(NINGBO)CO ,LTD.

Telephone0574-62615397 17757424292

Websitehttp://www.brofos.cn/

J & K SCIENTIFIC LTD.

Telephone010-82848833 400-666-7788

Websitehttp://www.jkchemical.com

Meryer (Shanghai) Chemical Technology Co., Ltd.

Telephone021-61259108 18621169109

Websitehttps://www.meryer.com/cn/index/

Alfa Aesar

Telephone400-6106006

Websitehttp://chemicals.thermofisher.cn

TCI (Shanghai) Development Co., Ltd.

Telephone021-67121386

Websitehttps://www.tcichemicals.com/CN/zh/

Beijing HwrkChemical Technology Co., Ltd

Telephone010-89508211 18501085097

Websitehttp://www.hwrkchemical.com

Energy Chemical

Telephone021-021-58432009 400-005-6266

Websitehttp://www.energy-chemical.com

Beijing Ouhe Technology Co., Ltd

Telephone010-82967028 13552068683

Websitehttp://www.ouhechem.com/

JinYan Chemicals(ShangHai) Co.,Ltd.

Telephone13817811078

Websitehttp://www.jingyan-chemical.com/

Jia Xing Isenchem Co.,Ltd

Telephone0573-85285100 18627885956

Websitehttps://www.chemicalbook.com/ShowSupplierProductsList14265/0.htm

Shanghai Hanhong Scientific Co.,Ltd.

Telephone021-54306202 13764082696

Websitehttps://www.hanhongsci.com

Shandong Xiya Chemical Co., Ltd

Telephone4009903999 13355009207

Websitehttp://www.xiyashiji.com

Sichuan Kulinan Technology Co., Ltd

Telephone400-1166-196 18981987031

Websitehttp://www.hx-r.com/

China Langchem Inc.

Telephone0086-21-58956006

Websitehttps://www.chemicalbook.com/ShowSupplierProductsList19141/0.htm

Tianjin heowns Biochemical Technology Co., Ltd.

Telephone400 638 7771

Websitehttp://www.heowns.com

Sinopharm Chemical Reagent Co,Ltd.

Telephone86-21-63210123

Websitehttp://www.reagent.com.cn

1of4

Related Products

Send Inquriy

7440-02-0

Chemical Properties

Safety Data

Raw materials And Preparation Products

Raw materials

Preparation Products

Hazard Information

General Description

Reactivity Profile

Air & Water Reactions

Hazard

Health Hazard

Potential Exposure

Fire Hazard

First aid

Shipping

Incompatibilities

Chemical Properties

Chemical Properties

Waste Disposal

Physical properties

Isotopes

Origin of Name

Occurrence

Characteristics

Definition

Definition

Definition

Preparation

Production Methods

Agricultural Uses

Carcinogenicity

Environmental Fate

Toxicity evaluation

Material Safety Data Sheet(MSDS)

Questions And Answer

History

Uses

Production

Reactions

Toxicity

Well-known Reagent Company Product Information

Supplier

Related Products