General Description
White solid with slight odor of ammonia. Denser than water .
Reactivity Profile
TRIISOPROPANOLAMINE(122-20-3) neutralizes acids to form salts plus water in exothermic reactions. May be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen is generated by combination with strong reducing agents, such as hydrides.
Air & Water Reactions
Water soluble
Health Hazard
Irritation of eyes and skin. May cause slight corneal injury or burn. Repeated contact may cause skin burn. Heated vapor may cause moderate respiratory irritation. Low to moderately toxic by oral routes.
Description
Triisopropanolamine (TIPA), a tertiary alkanolamine, is majorly used as a grinding chemical that reduces agglomeration in the ball milling process and changes the particle distribution of the finished cement.
Chemical Properties
Triisopropanolamine is a corrosive and hygroscopic
solid.
Chemical Properties
white to slightly yellow crystalline low
Application
Triisopropanolamine (TIPA) can act as an interfacial transition zone (ITZ) to improve the mechanical properties of the mortar and the concrete. It can also be used to increase the compressive strength of the cement-fly ash system by accelerating the hydration of both the compounds.
1. Cement industry - TIPA is commonly used a cement grinding additives. It increases the strength of cement and other mixtures for cement.
2. Metallurgy - TIPA is used as antioxidants and coolant and prevent corrosion in metals.
3. Polyurethane industry - preliminary usage as a agent and catalyst to improve PU quality.
4. Textile industry - TIPA is used as refining agent and other dye specific agent properties.
Definition
ChEBI: Triisopropanolamine is an amino alcohol.
Preparation
The process involves preparing raw materials with a molar ratio of 1:3.00 to 3.05 using liquefied ammonia (pure ammonia) and propylene oxide. The reactor is decompressed to -0.098Mpa to remove oxygen, then deionized water is added to achieve a 28-60% concentration of ammoniacal liquor. The ammonia and propylene oxide are introduced in two batches: first, half the weight of liquefied ammonia is pumped into the still, followed by half the weight of propylene oxide at 20-50°C, maintaining an internal pressure below 0.5Mpa and a reaction temperature of 20-75°C. After adding propylene oxide, the mixture is kept for 1.0-3.0 hours. Then, under the same conditions, the second half of the liquefied ammonia and propylene oxide are added, and the reaction continues for another 1.0-3.0 hours at 20-120°C. After the reaction, the pressure in the reactor is reduced to remove moisture and low-boiling impurities, resulting in a Triisopropanolamine product with less than 5% water content.
Hazard
Irritant to skin and eyes.
Flammability and Explosibility
Nonflammable
Toxicity evaluation
Diisopropanolamine, Triisopropanolamine, Isopropanolamine, and Mixed Isopropanolamine are used as water-soluble emulsifiers and neutralizers in cosmetic products at concentrations up to 1%. In animal studies these ingredients were slightly toxic to practically nontoxic to rats and guinea pigs via acute oral administration. Triisopropanolamine was relatively nontoxic to rats in the two subchronic oral studies. These ingredients were moderate skin irritants for rabbits. All four ingredients, when tested at 100% concentrations, were severe ocular irritants in rabbits. Products containing small amounts (-1%) of Diisopropanolamine or Triisopropanolamine were not ocular irritants in rabbits. The Triisopropanolamine salt was not mutagenic in Aspergillus nidulans. Diisopropanolamine and Isopropanolamine at concentrations of 2% did not induce allergic contact dermatitis or photoallergic dermatitis in humans. Clinical studies on cosmetic products containing no more than 1% Diisopropanolamine or 1.1% Triisopropanolamine were minimal skin irritant and contact sensitizers. It is concluded that Diisopropanolamine, Triisopropanolamine, Isopropanolamine, and Mixed Isopropanolamine are safe as cosmetic ingredients in the present practices of use and concentration. The Isopropanolamines should not be used in products containing N-nitrosating agents.
Final Report on the Safety Assessment of Diisopropanolamine, Triisopropanolamine, Isopropanolamine, and Mixed Isopropanolamine
Toxics Screening Level
The Initial Threshold Screening Level for TIPA is 19 μg/m3 with an annual averaging time.
Precautions
Hygroscopic. Store away from oxidizing agents, water/moisture. Keep the container tightly closed and place it in a cool, dry and well ventilated condition. Store under inert gas.
References
Pensri Piboonchaisit, et al. Novel Route to Tris(silatranyloxy-i-propyl)amine Directly from Silica and Triisopropanolamine, Part I.ScienceAsia.1999,25113-119.
Paul J. Sandberg.; F. Doncaster. On the mechanism of strength enhancement of cement paste and mortar with triisopropanolamine.Cem. Concr. Res.2004,34(6), 973-976.
