General Description
Colorless liquid with a sweetish odor .
Reactivity Profile
BETA-PICOLINE(108-99-6) may react with oxidizing materials . Neutralizes acids in exothermic reactions to form salts plus water. May be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen may be generated in combination with strong reducing agents, such as hydrides.
Air & Water Reactions
Highly Flammable. Water soluble.
Health Hazard
HARMFUL if swallowed, inhaled or absorbed through skin. Material is extremely destructive to tissue of the mucous membranes and upper respiratory tract, eyes and skin. Inhalation may be fatal as a result of spasm, inflammation of larynx and bronchi, chemical pneumonitis and pulmonary edema. Symptoms of exposure may include burning sensation, coughing, wheezing, laryngitis, shortness of breath, headache, nausea and vomiting.
Potential Exposure
(o-isomer); Suspected reprotoxic hazard, Primary irritant (w/o allergic reaction), (m-isomer): Possible risk of forming tumors, Primary irritant (w/o allergic reaction). Picolines are used as intermediates in pharmaceutical manufacture, pesticide manufacture; and in the manufacture of dyes and rubber chemicals. It is also used as a solvent.
Fire Hazard
Special Hazards of Combustion Products: Vapors may travel considerable distance to a source of ignition and flashback. Forms explosive mixtures in air. Emits toxic fumes under fire conditions.
First aid
If this chemical gets into the eyes, remove any contact lenses at once and irrigate immediately for at least 15 minutes, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts the skin, remove contaminated clothing and wash immediately with soap and water. Speed in removing material from skin is of extreme importance. Shampoo hair promptly if contaminated. Seek medical attention immediately. If this chemical has been inhaled, remove from exposure, begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR if heart action has stopped. Transfer promptly to a medical facility. When this chemical has been swallowed, get medical attention. Give large quantities of water and induce vomiting. Do not make an unconscious person vomit.
Shipping
UN2313 Picolines, Hazard Class: 3; Labels: 3-Flammable liquid.
Incompatibilities
Vapors may form explosive mixture with air. Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, epoxides. Attacks copper and its alloys.
Chemical Properties
colourless liquid
Chemical Properties
Picolines are colorless liquids. Strong, unpleasant, pyridine-like odor.“Picoline” is often used as mixed isomers.
Occurrence
3-Methylpyridine is released during the production of fossil fuels. It is formed as a byproduct of coke production (Naizer and Mashek 1974); is present in coal gasification wastewater (Giabbai et al 1985); is a contaminant of groundwater near underground coal gasification sites (Stuermer and Morris 1982); is a component of groundwater contaminated with coal-tar waste (Pereira et al 1983); and is found in shale oil wastewaters (Hawthorne and Sievers 1984; Hawthorne et al 1985). It is formed upon pyrolysis of wood (Yasuhara and Sugiura 1987) and is a constituent of cigarette (IARC 1986; Sakuma et al 1984) and marijuana (Merli et al 1981) smoke. 3-Methylpyridine is formed during the thermal degradation of nicotine in the burning of tobacco (Schmelz et al 1979). The chemical is also present in brewed coffee (Sasaki et al 1987) and black tea (Werkoff and Hubert 1975). 3-Methylpyridine has been detected along with other micropollutants in the Barcelona water supply (Rivera et al 1987). Methods for the biological treatment of wastewater high in the chemical have been developed (Roubiskova 1986). The biodegradability of 3-methylpyridine has been studied in various soils (Sims and Sommers 1985, 1986).
Uses
3-Picoline is used as a precursor in pharmaceuticals and agricultural industries. It acts as a precursor to 3-cyanopyridine, niacin, vitamin-B. It is an antidote for organophosphate poisoning.
Uses
A useful precursor to agrochemicals and antidotes for organophosphate poisoning.
Uses
Solvent; intermediate in the dye and resins industries; in the manufacture of insecticides, waterproofing agents, niacin, and niacinamide.
Definition
ChEBI: 3-methylpyridine is a methylpyridine that is pyridine substituted by a methyl group at position 3.
Production Methods
There are three major methods of 3-methylpyridine manufacturing: (1) vaporphase reaction of acetaldehyde and ammonia with formaldehyde and/or methanol in the presence of an acidic catalyst (e.g. Si02A103); (2) extraction from bone oil; (3) dry distillation of bones or coal (Hawley 1977; Parmeggiani 1983).
Flammability and Explosibility
Flammable
Industrial uses
3-Methylpyridine can be used as a solvent, an intermediate in the dye and resin industries, in the manufacture of insecticides, as a waterproofing agent, in synthesis of pharmaceuticals, as rubber accelerators and a laboratory reagent (Hawley 1977; Windholz et al 1983). It is also used as a chemical intermediate for niacin and niacinamide (anti-pellagra vitamins) production. U.S. production in 1978 was estimated at 1.32-2.07xl07 kg (HSDB 1988).
Synthesis
In a vapor-phase reaction over a nickel- containing catalyst in the presence of hydrogen, 2-methylglutaronitrile gives 3-methylpiperidine, which then undergoes dehydrogenation over palladium – alumina to give 3-methylpyridine:
A one-step gas-phase reaction over a palladium- containing catalyst is reported to give 3-methylpyridine in 50 % yield.
Carcinogenicity
No reliable studies in mammals
to evaluate the carcinogenic potential of any of the three
methylpyridines were found. None of the methylpyridines is
listed as a carcinogen by IARC, NTP, OSHA, or ACGIH.
Metabolism
Methylpyridines can be absorbed by inhalation, ingestion and skin contact (Parmeggiana 1983). The percentage uptake of 3-methylpyridine by rats increased with dosage; elimination occurred in 2 phases, the duration of which also was dose dependent (Zharikov and Titov 1982). Addition of a methyl group to pyridine greatly increased the rate of uptake into liver, kidney and brain of rats (Zharikov et al 1983). The position of the methyl group drastically influenced the pharmacokinetics of the methylpyridines, with 3-methylpyridine exhibiting the longest biological halflife.
N-Oxidation is a minor route for 3-methylpyridine biotransformation with 6.6, 4.2, and 0.7% biotransformation of the dose, respectively, being excreted in the urine of mice, rats and guinea pigs receiving i.p. doses of the chemical (Gorrod and Damani 1980). Urinary excretion of 3-methylpyridine N-oxide was increased following pretreatment of mice with phenobarbital but 3-methylcholanthrene had no appreciable effect on N-oxide elimination (Gorrod and Damani 1979a, 1979b). The structure of 3-methylpyridine N-oxide has been verified by mass spectrometry (Cowan et al 1978).
Purification Methods
In general, the same methods of purification that are described for 2-methylpyridine can be used. However, 3-methylpyridine often contains 4-methylpyridine and 2,6-lutidine, neither of which can be removed satisfactorily by drying and fractionation, or by using the ZnCl2 complex. Biddiscombe and Handley [J Chem Soc 1957 1954], after steam distillation as for 2-methylpyridine, treated the residue with urea to remove 2,6-lutidine, then azeotropically distilled with acetic acid (the azeotrope had b 114.5o/712mm), and recovered the base by adding excess of aqueous 30% NaOH, drying with solid NaOH and carefully fractionally distilling. The distillate is then fractionally crystallised by slow partial freezing. An alternative treatment [Reithoff et al. Ind Eng Chem (Anal Edn) 18 458 1946] is to reflux the crude base (500mL) for 20-24hours with a mixture of acetic anhydride (125g) and phthalic anhydride (125g) followed by distillation until phthalic anhydride begins to pass over. The distillate is treated with NaOH (250g in 1.5L of water) and then steam distilled. Addition of solid NaOH (250g) to this distillate (ca 2L) led to the separation of 3-methylpyridine which is removed, dried (K2CO3, then BaO) and fractionally distilled. (Subsequent fractional freezing would probably be advantageous.) The hydrochloride has m 85o, and the picrate has m 153o(from Me2CO, EtOH or H2O). [Beilstein 20 III/IV 2710, 20/5 V 506.]