基本信息 产品详情 公司简介 推荐产品
网站主页 化工产品目录 催化剂及助剂 防老剂 10,10'-氧代双吩砒 供应胶水防霉剂 白乳胶防霉剂 官方正品美国进口值得信赖
  • 供应胶水防霉剂 白乳胶防霉剂 官方正品美国进口值得信赖

供应胶水防霉剂 白乳胶防霉剂 官方正品美国进口值得信赖

Supply glue, anti - mildew, white emulsion, anti - mildew agent, official authentic, American import is reliable
58-36-6
广东 更新日期:2017-08-19

广州艾浩尔防霉抗菌科技有限公司

非会员
联系人:林滢彬
电话:020-86210762拨打
手机:15013134055 拨打
邮箱:1515992677@qq.com

产品详情:

中文名称:
供应胶水防霉剂 白乳胶防霉剂 官方正品美国进口值得信赖
英文名称:
Supply glue, anti - mildew, white emulsion, anti - mildew agent, official authentic, American import is reliable
CAS号:
58-36-6
品牌:
艾浩尔
产地:
广东
保存条件:
阴凉干燥
供应处:广东省广州市白云区石马桃红西街38号

艾浩尔防霉抗菌科技有限公司

防霉工程部:林先生

手机:15013134055

qq:1515992677

邮箱:1515992677@qq.com

电话:+86-020-86210762

传真:+86-020-86210731


iHeir-JS胶水防护处理技术

——水性胶水敏感性配方专用防霉抗菌剂

  iHeir-JS胶水防霉剂是一种高效、无毒杀菌剂,适用于高分子聚合物乳液及各类水性粘合剂。亦可用于抑制细菌和真菌在生产和存储胶水和其它含水有机产品中的滋生。iHeir-JS已经被广泛用于大容量存储乳液的抗菌防腐上。美国环境保护署(EPA)已批准登记iHeir-JS为水性胶水和涂料的罐内抗菌防腐剂。大量的实验及实际应用证明iHeir-JS对丙烯酸、聚醋酸乙烯粘合剂、聚苯乙烯丁酯以及其它共聚物有极好的防霉防腐功能,并且与这些产品中的有机和无机物成分有着极好的相容性。


iHeir-JS的特性

主要化学成份:

5-氯-2-甲基-4-異噻唑啉-3-酮

40%

2-甲基-4-異噻唑啉-3-酮

15%

 

物理性質:

活性成份浓度:

45%

粘度(25℃):

3cps

外观:

透明无色液体

比重(25℃):

1.02

气味:

柔和芳香味

溶解性 (水):

可任意混溶

pH  :

6~7

溶解性(有机溶剂):

溶于绝大多数有机溶剂

 


iHeir-JS使用方法及用量

1.iHeir-JS胶水防霉剂产品的供应形式为液体,易于混合。实验证明iHeir-JS的防霉防腐效果不会因不同的加入点而受到影响。iHeir-JS可以直接在胶水研磨、包装前或使用胶水前加入。为确保加入iHeir-JS后的均匀分散,必须将乳液和水性粘合剂充分搅拌(建议按1.0%-2.0%比例添加)。

2. 配合微生物胶囊技术加工在包装材料上,其活性成分的浓度取决于产品的大小或空间的大小。


包装及贮存:

25和160公升两种规格,请将iHeir-JS胶水防霉剂存放在常温室内空气流通处,请勿用无内衬的金属容器来装本品。在普通存储温度下,该产品最少有一年的稳定期。


适当地使用iHeir-JS较之使用其他杀菌剂有以下优点:

1. 广谱抗菌作用:可同时抑制细菌(包括格兰氏阴性、阳性细菌)和真菌(酵母菌、霉菌等)。

2. 成本低:成本(有效使用浓度)比一般市场上的抗菌防腐剂为低,且使用简便。

3. 在建议使用浓度下无毒,并且不含甲醛或甲醛释放物。

4. 优异的物理及化学相容性,对成品无副作用。

5. 有效活性浓度低,对环境友好。


IHEIR-JS 胶水防霉剂

【产品型号】iHeir-JS 【产品规格】25KG/桶 【外观颜色】透明无色 【包装规格】5KG/25KG/160KG

【主要用途】iHeir-JS胶水防霉剂 是一种高效、低毒杀菌剂,适用于乳胶漆、高分子聚合物乳液、颜料浆及各类水性涂料。亦可用于抑制细菌和真菌在生産和存储印刷油墨和其他含水有机産品中的滋生。


包装规格 Packaging Specification 

iHeir-JS胶水防霉剂采用25L蓝色四方塑料桶包装,最小包装为5KG(L)包装,请将本产品放在阴凉干燥的地方,且儿童不宜接触,避免接触到口、鼻、眼睛等,如接触到眼睛或口鼻,请立即用大量清水冲洗。


注意事项:本产品属于环保产品,但不排除个别人会产生过敏现象,因此建议使用橡胶手套和口罩操作,若不慎皮肤与药剂接触,可使用肥皂水清洗,产品若滴入眼中,应立即使用清水冲洗,若比较严重者,建议立即就医.

胶水防霉剂;白乳胶防霉剂;供应防霉剂厂家;防霉剂优质厂家;防霉剂那就好;艾浩尔防霉剂放心品牌;胶水防霉添加助剂;白乳胶防霉助剂


Supply department: no 38, stone west street, Baiyun district, Guangzhou city, Guangdong province
Aihaoer mould proof anti - bacterial science and technology co., ltd

Mould proof engineering: Mr Lin

Cell phone: 15013134055
Qq: 1515992677

Email: 1515992677 @ QQ

Tel: + 86 - 020 - 86210762

Fax: + 86 - 020 - 86210731

Protection - js glue protection treatment technology

- the sensitivity antibacterial agent for the sensitivity formula of water - borne glue

' - js glue is an efficient and non-toxic bactericide, suitable for polymer emulsion and various kinds of waterborne adhesives. It can also be used to inhibit the growth of bacteria and fungi in the production and storage of glue and other aqueous organic products. I - js has been widely used in the antimicrobial preservation of large capacity storage emulsions. The United States environmental protection agency ( EPA ) has approved the registration of' - js as an antibacterial preservative in a tank of water-based glue and paint. A large number of experiments and practical applications show that' - js has excellent anti - corrosion function for acrylic acid, polyvinyl acetate adhesive, butyl polystyrene and other copolymers, and has excellent compatibility with organic and inorganic components in these products. 

I characteristics of the' - js

Main chemical constituents:

5 - chloro - 2 - methyl - 4 - strange - 3 - one

40 per cent

2 - methyl - 4 - strange - 3 - one

15 per cent



Physical properties:

Active ingredient concentration:

Forty - five per cent

Viscosity ( 25 c ):

3c PS

Appearance

Transparent colourless liquid

Specific gravity ( 25 c ):

1. 02 ( 1 )

Smell

Soft fragrance

Solubility ( water ):

It can be mixed with each other

Ph:

6 - 7

Solubility ( organic solvents ):

Soluble in most organic solvents



The use of' - js and its usage

1. the supply of the' - js Glue products is liquid and is easy to mix. The experimental results show that the mould proof - js effect of mould proof - js will not be affected by different points of entry. ' - js can be added directly before the glue grinding, packaging or using glue. In order to ensure the uniform dispersion of the' - js, the emulsion and water-based adhesive must be fully stirred ( recommended to be added at 1.0 % - 2.0 % ). 

2. the concentration of the active ingredient in the packaging material depends on the size or the size of the product. 

Packaging and storage:

25 and 160 litres of the two specifications, please keep the' - js glue fungicide in the room temperature room air circulation, do not use the metal metal container to install this product. At the ordinary storage temperature, the product has at least one year of stability. 

The appropriate use of' - js has the following advantages over the use of other fungicides:

1. broad - spectrum antibacterial action: simultaneous inhibition of bacteria ( including gram - negative, positive bacteria ) and fungi ( yeast, mold, etc. ). 

2. low cost: the cost ( effective use concentration ) is lower than the antimicrobial preservative in the general market and is simple to use. 

3. it is not toxic at the recommended use concentration, and does not contain formaldehyde or formaldehyde release. 

4. excellent physical and chemical compatibility, no side effects on the finished product. 

5. low effective activity concentration and friendly to environment. 

I - js Glue fungicide

[ product model ] I - js [ product specification ] 25 / barrel [ appearance color ] transparent and colorless [ packaging specification ] 5 kg / 25 kg / 160 kg

【 main use 】 I - js glue fungicide is an efficient and low toxicity bactericide, which is suitable for latex paint, polymer emulsion, pigment slurry and various kinds of waterborne coatings. It can also be used to inhibit the growth of bacteria and fungi in the production and storage of printing inks and other aqueous organic products. 

Packaging specification packaging specification

' - js glue mould inhibitor is packed in 25l blue square bucket, the minimum packing is 5 kg ( l ) packing, please put this product in a cool and dry place, and children should not contact, avoid contact to mouth, nose, eyes, etc., such as contact eyes or nose and mouth, please wash with plenty of water immediately. 

Note: this product belongs to environmental protection products, but do not exclude others will produce allergy, so it is recommended to use rubber gloves and face mask operation, if the skin and pharmaceutical contact, can use soapy water to wash, if the product drops into the eyes, should be immediately flush with clean water, if more serious, recommend immediate medical treatment.

胶水防霉剂;白乳胶防霉剂;供应防霉剂厂家;防霉剂优质厂家;防霉剂那就好;艾浩尔防霉剂放心品牌;胶水防霉添加助剂;白乳胶防霉助剂

公司简介

iHeir艾浩尔内置除臭、防水、防霉、抗菌产品保护的全球领导者,为世界各地的消费、工业及产品设计耐用的除臭、防水、防霉、抗菌解决方案。iHeir保护可以设计到各类材料中,包括:聚合物、纺织品、涂层、纸张、粘合剂、皮革、家具、竹木、礼品、包装、电子电器产品、五金塑胶制品、体育运动器材。 iHeir 的保护在制造过程中内置到产品中,抑制微生物的滋生。细菌、霉和霉菌等微生物会形成污渍和臭味,并导致产品变质。有了 iHeir 防霉抗菌保护,便可在产品使用寿命期内抑制微生物的繁殖。 iHeir 防霉抗菌保护确保持续、耐用有效的防霉抗菌保护,从而提供附加的防护层,对抗破坏性微生物,而不会被磨掉或洗掉。

成立日期 (10年)
注册资本 100万
员工人数 10-50人
年营业额 ¥ 100万-300万
经营模式 贸易,试剂
主营行业 合成材料,绿色化学产品

供应胶水防霉剂 白乳胶防霉剂 官方正品美国进口值得信赖相关厂家报价 更多

  • OBPA
  • OBPA
  • 武汉兴众诚科技有限公司 VIP
  • 2024-03-28
  • ¥215
内容声明
拨打电话 立即询价