Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > 1-Bromo-3,4-difluorobenzene > 1-Bromo-3,4-difluorobenzene(348-61-8)

1-Bromo-3,4-difluorobenzene(348-61-8)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
1-Bromo-3,4-difluorobenzene
Synonyms
1-Bromo-3,4-difluorobenzene
3,4-Difluorobromobenzene
CAS
348-61-8
Formula
C6H3BrF2
Molecular Weight
192.99
EINECS
206-481-5
Beilstein/Gmelin
1934811
Beilstein Reference
4-05-00-00679

Physical and Chemical Properties

Appearance
Clear, colorless liquid.
Solubility in water
Insoluble
Melting Point
-4
Boiling Point
150
Density
1.7 g/cm3
Refractive Index
1.50 (20 C)

First Aid Measures

Ingestion
Get medical aid. Wash mouth out with water.
Inhalation
Remove from exposure to fresh air immediately. Get medical aid.
Skin
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes.
Eyes
Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.

Handling and Storage

Storage
Keep away from sources of ignition. Store in a cool, dry place. Store in a tightly closed container. Flammables-area.
Handling
Use spark-proof tools and explosion proof equipment. Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin and eyes. Use only in a chemical fume hood.

Hazards Identification

Ingestion
The toxicological properties of this substance have not been fully investigated.
Inhalation
Causes respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.
Skin
Causes skin irritation.
Eyes
Causes eye irritation.
Hazards
Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers.
EC Risk Phrase
R 10 36/37/38
EC Safety Phrase
S 26 36
UN (DOT)
1993

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.

Fire Fighting Measures

Flash Point
33
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Will burn if involved in a fire. Containers may explode in the heat of a fire. Extinguishing media: Use water spray to cool fire-exposed containers. Use foam, dry chemical, or carbon dioxide.
Fire Potential
HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.

Accidental Release Measures

Small spills/leaks
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Remove all sources of ignition. Use a spark-proof tool.

Stability and Reactivity

Stability
No data.
Incompatibilities
Strong oxidizing agents.
Decomposition
Carbon monoxide, carbon dioxide, hydrogen fluoride, hydrogen bromide.
Combustion Products
Fire may produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number
1993
Hazard Class
3
Packing Group
I; II; III
Contact More