Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > 2-Bromobenzoyl chloride > 2-Bromobenzoyl chloride(7154-66-7)

2-Bromobenzoyl chloride(7154-66-7)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
2-Bromobenzoyl chloride
Synonyms
2-Bromobenzoic acid chloride
o-Bromobenzoyl chloride
CAS
7154-66-7
Formula
C7H4BrClO
Molecular Weight
219.46
EINECS
230-507-4
RTECS
DM6635000
RTECS Class
Other
Beilstein/Gmelin
508506
Beilstein Reference
4-09-00-01013

Physical and Chemical Properties

Appearance
Clear, colorless liquid.
Solubility in water
Insoluble
Melting Point
11
Boiling Point
245
Vapor Pressure
0.03 (25 C)
Density
1.67 g/cm3
Partition Coefficient
2.56
Heat Of Vaporization
48.3 kJ/mol
Vapor Density
7.57
Refractive Index
1.5965 (20 C)

First Aid Measures

Ingestion
Never give anything by mouth to an unconscious person. Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation
Get medical aid immediately. Remove from exposure to fresh air immediately. If breathing is difficult, give oxygen. Do not use mouth-to-mouth respiration if victim ingested or inhaled the substance; induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device.
Skin
Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Eyes
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation is required (at least 30 minutes).

Handling and Storage

Storage
Refrigerator (approx 4 C). Keep containers tightly closed. Store protected from moisture.
Handling
Keep container tightly closed. Do not get on skin or in eyes. Do not ingest or inhale. Use with adequate ventilation. Do not allow contact with water. Use only in a chemical fume hood. Discard contaminated shoes. Keep from contact with moist air and steam.

Hazards Identification

Inhalation
May cause severe irritation of the respiratory tract with sore throat, coughing, shortness of breath and delayed lung edema. Causes chemical burns to the respiratory tract. Inhalation may be fatal as a result of spasm, inflammation, edema of the larynx and bronchi, chemical pneumonitis and pulmonary edema. May cause systemic effects. May cause burning sensation, coughing, wheezing, laryngitis, shortness of breath, headache, nausea, and vomiting.
Skin
Causes skin burns. May cause skin rash (in milder cases), and cold and clammy skin with cyanosis or pale color.
Eyes
Causes eye burns. Lachrymator. May cause chemical conjunctivitis and corneal damage.
Ingestion
May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns. May cause perforation of the digestive tract. May cause systemic effects.
Hazards
When heated, vapors may form explosive mixtures with air: indoors, outdoors, and sewers explosion hazards.
EC Risk Phrase
R 34
EC Safety Phrase
S 26 36/37/39 45
UN (DOT)
3265

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to minimize contact with skin.
Respirators
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.
Exposure Effects
Effects may be delayed.

Fire Fighting Measures

Flash Point
102
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Water hydrolyzes material liberating acidic gas which in contact with metal surfaces can generate flammable and/or explosive hydrogen gas. Extinguishing media: Do NOT use water directly on fire. Use foam, dry chemical, or carbon dioxide. Do NOT get water inside containers.
Fire Potential
Combustible material: may burn but does not ignite readily.

Accidental Release Measures

Small spills/leaks
Clean up spills immediately, using the appropriate protective equipment. Cover with sand, dry lime or soda ash and place in a closed container for disposal. Provide ventilation. Do not get water inside containers.

Stability and Reactivity

Incompatibilities
Oxidizing agents, strong bases, alcohols, moisture, water.
Stability
Stable under normal temperatures and pressures. Moisture sensitive.
Decomposition
Hydrogen chloride, phosgene, carbon monoxide, carbon dioxide, hydrogen bromide.
Combustion Products
Fire may produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number
3265
Hazard Class
8
Packing Group
I; II; III
Contact More