Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > Thiophene-2-sulfonyl chloride > Thiophene-2-sulfonyl chloride(16629-19-9)

Thiophene-2-sulfonyl chloride(16629-19-9)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
Thiophene-2-sulfonyl chloride
Synonyms
2-(Chlorosulfonyl)thiophene
2-Thienylsulfonyl chloride
Thiophene-2-sulfonyl chloride
CAS
16629-19-9
Formula
C4H3ClO2S2
Molecular Weight
182.65
EINECS
240-677-1
Beilstein/Gmelin
123536
Beilstein Reference
5-18-09-00426
EC Class
corrosive

Physical and Chemical Properties

Appearance
White crystals crystals.
Solubility in water
Slightly soluble
Melting Point
32
Boiling Point
82 - 84 (1 torr)
Refractive Index
1.57 (20 C)

First Aid Measures

Ingestion
Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Get medical aid immediately.
Inhalation
Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. DO NOT use mouth-to-mouth respiration. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Skin
Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Eyes
Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation is required (at least 30 minutes).

Handling and Storage

Storage
Store in a cool, dry place. Keep container closed when not in use. Corrosives area. Store protected from moisture.
Handling
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Do not get on skin or in eyes. Do not ingest or inhale. Use with adequate ventilation. Do not allow contact with water. Discard contaminated shoes. Keep from contact with moist air and steam.

Hazards Identification

Inhalation
Causes chemical burns to the respiratory tract. Aspiration may lead to pulmonary edema. May cause systemic effects.
Skin
Causes skin burns. May cause skin rash (in milder cases), and cold and clammy skin with cyanosis or pale color.
Eyes
Causes eye burns. May cause chemical conjunctivitis and corneal damage.
Ingestion
May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns. May cause perforation of the digestive tract. May cause systemic effects.
Hazards
Contact with metals may evolve flammable hydrogen gas.
EC Risk Phrase
R 34
EC Safety Phrase
S 26 36/37/39 45
UN (DOT)
3261

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to minimize contact with skin.
Respirators
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.
Exposure Effects
Effects may be delayed.

Fire Fighting Measures

Flash Point
> 113
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Extinguishing media: Use agent most appropriate to extinguish fire. Do NOT get water inside containers. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam.
Fire Potential
Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes.

Accidental Release Measures

Small spills/leaks
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, using the appropriate protective equipment. Avoid generating dusty conditions. Provide ventilation. Do not get water inside containers.

Stability and Reactivity

Disposal Code
11
Incompatibilities
Moisture, strong bases, strong oxidizing agents.
Stability
Stable under normal temperatures and pressures.
Decomposition
Carbon monoxide, oxides of sulfur, irritating and toxic fumes and gases, carbon dioxide, oxides of chlorine.
Combustion Products
Fire may produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number
3261
Hazard Class
8
Packing Group
I; II; III
HS Code
2934 99 90
Contact More