2-ナフトール

外観

白色〜うすい紅色, 結晶〜粉末

溶解性

エタノール及びジエチルエーテルに溶けやすく、水に極めて溶けにくい。

用途

医薬品原料、有機合成原料。

使用上の注意

空気中で次第に着色する。

化学的特性

2-Naphthol is a white, crystalline solid. Slight phenolic odor. Darkens in air and on exposure to light. 2-Naphthol [135-19-3] b-naphthol, 2- naphthalenol, 2-hydroxynaphthalene, C10H8O, Mr 144.16, forms colorless plates upon sublimation, which darken on exposure to air or light. Unlike 1-naphthol it is nonvolatile in steam. 2-Naphthol is reduced with sodium or with hydrogen in the presence of a catalyst to give mainly 1,2,3,4-tetrahydro-2-naphthol (unlike 1- naphthol which gives the arylphenol under the same conditions). Oxidation with ferric chloride forms 2,20 -dihydroxy-1,10 -binaphthyl, with any blue coloration indicating the presence of 1- naphthol. Air oxidation at 300℃ with a vanadium pentoxide catalyst also yields 1,10 -bi-2-naphthol, which dehydrates at higher temperature to the oxide and finally decomposes to give benzoic acid. Treatment with sulfuryl chloride in carbon disulfide or with NaOCl – NaOH leads to 1- chloro-2-naphthol, whereas chlorine in sodium carbonate gives 8-chloro-2-naphthol ( plus 1, 10 - bi-2-naphthol). Reaction with phosphorus pentachloride at 150℃ gives 2-chloronaphthalene or at lower temperature, tri-2-naphthyl phosphate (mp 111℃), which can be isolated after treatment of the reaction mixture with alkali. Reaction with one equivalent of bromine in acetic acid gives 1-bromo-2-naphthol, whereas excess bromine yields 1,6-dibromo-2-naphthol. The latter is readily debrominated in dilute mineral acid to yield 6-bromo-2-naphthol. Excess bromine reacts with 2-naphthol at 100℃ to form 1,5,6- tribromo- and 1,3,5,6-tetrabromo-2-naphthol.

使用

2-Naphthol is used in the manufacture of dyes, perfumes, and medicinal organics, and in the production of antioxidants for synthetic rubber.

製造方法

2-Naphthol is produced by caustic fusion of naphthalene-2-sulfonic acid. Typically, the sodium salt of the sulfonic acid is added gradually to 50 % sodium hydroxide liquor at 300℃; the melt is then heated further at 320℃ in a gas-fired iron vessel with vigorous agitation. After completion of the reaction, the melt is run into excess water, possibly including filtrate from the previous batch at a proven tolerable level, and the naphtholate solution is neutralized to pH 8 with dilute sulfuric acid. If the temperature is maintained at >100℃ during neutralization, the crude product comes out of solution as an oil, which is separated, washed with hot water, and distilled under vacuum to give pure 2-naphthol. The molten material is processed through a flaker to give the final product for packaging. The fusion yield is about 80 % of the theoretical value, resulting in an overall yield of 70 % based on naphthalene. Typical specifications for 2-naphthol are clear solution in dilute caustic soda,  mp 120.5℃, and 1-naphthol content<0.3 %.
The newer method of manufacture is economically and environmentally favored in the United States, because despite requiring three stages, it is more amenable to continuous operation with recycle streams. The alkylation and isomerization are carried out up to 240℃ with a phosphoric acid catalyst. Final catalytic oxidation at 90 – 110℃ gives the hydroperoxide, which is cleaved with dilute sulfuric acid to give 2-naphthol in high overall yield in spite of modest oxidation conversion.

定義

ChEBI: 2-naphthol is a naphthol carrying a hydroxy group at position 2. It has a role as an antinematodal drug, a genotoxin, a human xenobiotic metabolite, a mouse metabolite, a human urinary metabolite and a radical scavenger.

主な応用

It is used to produce Tobias acid, J acid, 2-hydroxy-3-naphthoic acid and azo dyes, and it is the raw material for rubber antioxidants, mineral dressing agents, fungicides, antiseptics, preservatives, etc.
As feed preservative. In China, it can be used for citrus preservation, the maximum dosage amount is 0.1 g/kg and the residue amount should be no more than 70 mg/kg.
2-Naphthol, also called ?-naphthol, 2-naphthalenol, is the intermediate for plant growth regulator, 2-naphthoxyacetic acid.
As analytic agent, absorbent of ethylene and carbon monoxide, and fluorescence indicator.
Important organic raw material and dye intermediate, used to produce Tobias acid, butyric acid, β-hydroxynaphthoic acid and used to produce N-phenyl-2-naphthylamine, Diafen NN and other antioxidant, organic pigments, and fungicides.
For the detection of bromine, chlorine, chlorate, niobium, copper, nitrite, and potassium. Substrate for fluorometric assay of phenol sulfotransferase. Acid and alkali indicator, dyes, organic synthesis, qualitative determination of allyl alcohol, methanol, chloroform, etc. Absorbent of carbon monoxide, ethanol, and fluorescence indicator. Determination of carbon monoxide, copper, nitrite, and potassium. Ethylene absorbent.

反応性

2-Naphthol is naphthalene homologues of phenol, with the hydroxyl group being more reactive than in the phenols.2-Naphthol converts to 2-naphthalenethiol by reaction with dimethylthiocarbamoyl chloride via the Newman–Kwart rearrangement.

一般的な説明

2-Naphthol (2OH) is a hydroxyarene molecule, which when electronically excited forms strong acid. Excited 2OH dissociates only in water. It has a slight phenolic odor. It is incompatible with strong oxidizing agents, strong bases, acid chlorides and acid anhydrides. It is one of the most commonly used fluorescence dye.

危険性

See α-naphthol

健康ハザード

Although the toxicity of 2-naphthol is of low order in test animals, ingestion of large amounts may result in nausea, vomiting, diarrhea, abdominal pain, convulsions, and hemolytic anemia. Death may result from respiratory failure. The oral LD50 value in rats is in the range 2000 mg/kg. 2-Naphthol is slightly more toxic than 1-naphthol [9015-3], the oral LD50 value of which is in the range 2500 mg/kg.
Skin contact can produce peeling of the skin and pigmentation.

火災危険

Noncombustible solid.

安全性プロファイル

Poison by ingestion, inhalation, and subcutaneous routes. Mutation data reported. A skin and eye irritant. Combustible when exposed to heat or flame. To fight fire, use CO2, dry chemical. Incompatible with antipyrine, camphor, phenol, ferric salts, menthol, potassium permanganate and other oxidzing materials, urethane.

職業ばく露

A potential danger to those involved in rubber antioxidant production, synthesis of dyes; leather processing; fungicides, pharmaceuticals, and perfumes. Used as an antioxidant for fats, oils; as an antiseptic; in insecticides.

概要

無色(または黄色)の結晶固体である。ナフタレンの水素を1個、ヒドロキシ基に置換した化合物で、フェノール類に分類される芳香族化合物である。ヒドロキシ基の置換位置が異なる異性体、1-ナフトールが存在する。化学工業ではβ-ナフトールと呼ばれている。

輸送方法

UN2811 Toxic solids, organic, n.o.s., Hazard Class: 6.1; Labels: 6.1-Poisonous materials, Technical Name Required. UN3077 Environmentally hazardous substances, solid, n.o.s., Hazard Class: 9; Labels: 9-Miscellaneous hazardous material, Technical Name Required.

純化方法

Crystallise 2-naphthol from aqueous 25% EtOH (charcoal), H2O, *benzene, toluene or CCl4. Alternatively, extract it repeatedly with small amounts of EtOH, followed by dissolution in a minimum volume of EtOH and precipitation with distilled water, then drying over P2O5 under vacuum. It has also been dissolved in aqueous NaOH and precipitated by adding acid (repeat several times), then precipitated from *benzene by addition of heptane. Final purification can be by zone melting or sublimation in vacuo. The 4-nitrobenzoate has m 104o (from EtOH). [Bardez et al. J Phys Chem 89 5031 1985, Kikuchi et al. J Phys Chem 91 574 1987, Beilstein 6 IV 4253.]

不和合性

Dust or powder may form explosive mixture with air. Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, epoxides, iron salts; 2,3-dimethyl-1- phenyl-3-pyrazolin-5-one (antipyrine); camphor, phenol, menthol, urethane.

廃棄物の処理

Mix with flammable solvent and atomize into an incinerator.